CFR Subpart B

in effect

37 C.F.R. § 1.191 Appeal to Patent Trial and Appeal Board.

Appeals to the Patent Trial and Appeal Board under 35 U.S.C. 134(a) and (b) are conducted according to part 41 of this title.

37 C.F.R. § 1.197 Termination of proceedings.

(a) Proceedings on an application are considered terminated by the dismissal of an appeal or the failure to timely file an appeal to the court or a civil action except: (1) Where claims stand allowed in an application; or (2) Where the nature of the decision requires further action by the examiner. (b) The date of termination of proceedings on an application is the date on which the appeal is dismissed or the date on which the time for appeal to the U.S. Court of Appeals for the Federal Circuit or review by civil action (§ 90.3 of this chapter) expires in the absence of further appeal or review. If an appeal to the U.S. Court of Appeals for the Federal Circuit or a civil action has been filed, proceedings on an application are considered terminated when the appeal or civil action is terminated. A civil action is terminated when the time to appeal the judgment expires. An appeal to the U.S. Court of Appeals for the Federal Circuit, whether from a decision of the Board or a judgment in a civil action, is terminated when the mandate is issued by the Court.

37 C.F.R. § 1.198 Reopening after a final decision of the Patent Trial and Appeal Board.

When a decision by the Patent Trial and Appeal Board on appeal has become final for judicial review, prosecution of the proceeding before the primary examiner will not be reopened or reconsidered by the primary examiner except under the provisions of § 1.114 or § 41.50 of this title without the written authority of the Director, and then only for the consideration of matters not already adjudicated, sufficient cause being shown.

37 C.F.R. § 1.130 Affidavit or declaration of attribution or prior public disclosure under the Leahy-Smith America Invents Act.

(a) Affidavit or declaration of attribution. When any claim of an application or a patent under reexamination is rejected, the applicant or patent owner may submit an appropriate affidavit or declaration to disqualify a disclosure as prior art by establishing that the disclosure was made by the inventor or a joint inventor, or the subject matter disclosed was obtained directly or indirectly from the inventor or a joint inventor. (b) Affidavit or declaration of prior public disclosure. When any claim of an application or a patent under reexamination is rejected, the applicant or patent owner may submit an appropriate affidavit or declaration to disqualify a disclosure as prior art by establishing that the subject matter disclosed had, before such disclosure was made or before such subject matter was effectively filed, been publicly disclosed by the inventor or a joint inventor or another who obtained the subject matter disclosed directly or indirectly from the inventor or a joint inventor. An affidavit or declaration under this paragraph must identify the subject matter publicly disclosed and provide the date such subject matter was publicly disclosed by the inventor or a joint inventor or another who obtained the subject matter disclosed directly or indirectly from the inventor or a joint inventor. (1) If the subject matter publicly disclosed on that date was in a printed publication, the affidavit or declaration must be accompanied by a copy of the printed publication. (2) If the subject matter publicly disclosed on that date was not in a printed publication, the affidavit or declaration must describe the subject matter with sufficient detail and particularity to determine what subject matter had been publicly disclosed on that date by the inventor or a joint inventor or another who obtained the subject matter disclosed directly or indirectly from the inventor or a joint inventor. (c) When this section is not available. The provisions of this section are not available if the rejection is based upon a disclosure made more than one year before the effective filing date of the claimed invention. The provisions of this section may not be available if the rejection is based upon a U.S. patent or U.S. patent application publication of a patented or pending application naming another inventor, the patent or pending application claims an invention that is the same or substantially the same as the applicant's or patent owner's claimed invention, and the affidavit or declaration contends that an inventor named in the U.S. patent or U.S. patent application publication derived the claimed invention from the inventor or a joint inventor named in the application or patent, in which case an applicant or a patent owner may file a petition for a derivation proceeding pursuant to § 42.401 et seq. of this title. (d) Applications and patents to which this section is applicable. The provisions of this section apply to any application for patent, and to any patent issuing thereon, that contains, or contained at any time: (1) A claim to a claimed invention that has an effective filing date as defined in § 1.109 that is on or after March 16, 2013; or (2) A specific reference under 35 U.S.C. 120, 121, 365(c), or 386(c) to any patent or application that contains, or contained at any time, a claim to a claimed invention that has an effective filing date as defined in § 1.109 that is on or after March 16, 2013.

37 C.F.R. § 1.131 Affidavit or declaration of prior invention or to disqualify commonly owned patent or published application as prior art.

(a) When any claim of an application or a patent under reexamination is rejected, the applicant or patent owner may submit an appropriate oath or declaration to establish invention of the subject matter of the rejected claim prior to the effective date of the reference or activity on which the rejection is based. The effective date of a U.S. patent, U.S. patent application publication, or international application publication under PCT Article 21(2) is the earlier of its publication date or the date that it is effective as a reference under 35 U.S.C. 102(e) as in effect on March 15, 2013. Prior invention may not be established under this section in any country other than the United States, a NAFTA country, or a WTO member country. Prior invention may not be established under this section before December 8, 1993, in a NAFTA country other than the United States, or before January 1, 1996, in a WTO member country other than a NAFTA country. Prior invention may not be established under this section if either: (1) The rejection is based upon a U.S. patent or U.S. patent application publication of a pending or patented application naming another inventor which claims interfering subject matter as defined in § 41.203(a) of this chapter, in which case an applicant may suggest an interference pursuant to § 41.202(a) of this chapter; or (2) The rejection is based upon a statutory bar. (b) The showing of facts for an oath or declaration under paragraph (a) of this section shall be such, in character and weight, as to establish reduction to practice prior to the effective date of the reference, or conception of the invention prior to the effective date of the reference coupled with due diligence from prior to said date to a subsequent reduction to practice or to the filing of the application. Original exhibits of drawings or records, or photocopies thereof, must accompany and form part of the affidavit or declaration or their absence must be satisfactorily explained. (c) When any claim of an application or a patent under reexamination is rejected under 35 U.S.C. 103 as in effect on March 15, 2013, on a U.S. patent or U.S. patent application publication which is not prior art under 35 U.S.C. 102(b) as in effect on March 15, 2013, and the inventions defined by the claims in the application or patent under reexamination and by the claims in the patent or published application are not identical but are not patentably distinct, and the inventions are owned by the same party, the applicant or owner of the patent under reexamination may disqualify the patent or patent application publication as prior art. The patent or patent application publication can be disqualified as prior art by submission of: (1) A terminal disclaimer in accordance with § 1.321(c); and (2) An oath or declaration stating that the application or patent under reexamination and patent or published application are currently owned by the same party, and that the inventor named in the application or patent under reexamination is the prior inventor under 35 U.S.C. 104 as in effect on March 15, 2013. (d) The provisions of this section apply to any application for patent and to any patent issuing thereon, that contains, or contained at any time: (1) A claim to an invention that has an effective filing date as defined in § 1.109 that is before March 16, 2013; or (2) A specific reference under 35 U.S.C. 120, 121, 365(c), or 386(c) to any patent or application that contains, or contained at any time, a claim to an invention that has an effective filing date as defined in § 1.109 that is before March 16, 2013. (e) In an application for patent to which the provisions of § 1.130 apply, and to any patent issuing thereon, the provisions of this section are applicable only with respect to a rejection under 35 U.S.C. 102(g) as in effect on March 15, 2013.

37 C.F.R. § 1.132 Affidavits or declarations traversing rejections or objections.

When any claim of an application or a patent under reexamination is rejected or objected to, any evidence submitted to traverse the rejection or objection on a basis not otherwise provided for must be by way of an oath or declaration under this section.

37 C.F.R. § 1.91 Models or exhibits not generally admitted as part of application or patent.

(a) A model or exhibit will not be admitted as part of the record of an application unless it: (1) Substantially conforms to the requirements of § 1.52 or § 1.84; (2) Is specifically required by the Office; or (3) Is filed with a petition under this section including: (i) The fee set forth in § 1.17(h); and (ii) An explanation of why entry of the model or exhibit in the file record is necessary to demonstrate patentability. (b) Notwithstanding the provisions of paragraph (a) of this section, a model, working model, or other physical exhibit may be required by the Office if deemed necessary for any purpose in examination of the application. (c) Unless the model or exhibit substantially conforms to the requirements of § 1.52 or § 1.84 under paragraph (a)(1) of this section, it must be accompanied by photographs that show multiple views of the material features of the model or exhibit and that substantially conform to the requirements of § 1.84.

37 C.F.R. § 1.93 Specimens.

When the invention relates to a composition of matter, the applicant may be required to furnish specimens of the composition, or of its ingredients or intermediates, for the purpose of inspection or experiment.

37 C.F.R. § 1.94 Return of models, exhibits or specimens.

(a) Models, exhibits, or specimens may be returned to the applicant if no longer necessary for the conduct of business before the Office. When applicant is notified that a model, exhibit, or specimen is no longer necessary for the conduct of business before the Office and will be returned, applicant must arrange for the return of the model, exhibit, or specimen at the applicant's expense. The Office will dispose of perishables without notice to applicant unless applicant notifies the Office upon submission of the model, exhibit or specimen that a return is desired and makes arrangements for its return promptly upon notification by the Office that the model, exhibit or specimen is no longer necessary for the conduct of business before the Office. (b) Applicant is responsible for retaining the actual model, exhibit, or specimen for the enforceable life of any patent resulting from the application. The provisions of this paragraph do not apply to a model or exhibit that substantially conforms to the requirements of § 1.52 or § 1.84, where the model or exhibit has been described by photographs that substantially conform to § 1.84, or where the model, exhibit or specimen is perishable. (c) Where applicant is notified, pursuant to paragraph (a) of this section, of the need to arrange for return of a model, exhibit or specimen, applicant must arrange for the return within the period set in such notice, to avoid disposal of the model, exhibit or specimen by the Office. Extensions of time are available under § 1.136, except in the case of perishables. Failure to establish that the return of the item has been arranged for within the period set or failure to have the item removed from Office storage within a reasonable amount of time notwithstanding any arrangement for return, will permit the Office to dispose of the model, exhibit or specimen.

37 C.F.R. § 1.95 Copies of exhibits.

Copies of models or other physical exhibits will not ordinarily be furnished by the Office, and any model or exhibit in an application or patent shall not be taken from the Office except in the custody of an employee of the Office specially authorized by the Director.

37 C.F.R. § 1.96 Submission of computer program listings.

(a) General. Descriptions of the operation and general content of computer program listings should appear in the description portion of the specification. A computer program listing for the purpose of this section is defined as a document that lists, in appropriate sequence, the instructions, routines, and other contents of a program for a computer. The program listing may be either in machine or machine-independent (object or source) language that will cause a computer to perform a desired procedure or task such as solving a problem, regulating the flow of work in a computer, or controlling or monitoring events. Computer program listings may be submitted in patent applications, as set forth in paragraphs (b) and (c) of this section. (b) Material which will be printed in the patent: If the computer program listing is contained in 300 lines or fewer, with each line of 72 characters or fewer, it may be submitted either as drawings or as part of the specification. (1) Drawings. If the listing is submitted as drawings, it must be submitted in the manner and complying with the requirements for drawings as provided in § 1.84. At least one figure numeral is required on each sheet of drawing. (2) Specification. (i) If the listing is submitted as part of the specification, it must be submitted in accordance with the provisions of § 1.52. (ii) Any listing having more than 60 lines of code that is submitted as part of the specification must be positioned at the end of the description but before the claims. Any amendment must be made by way of submission of a substitute sheet. (c) As an appendix that will not be printed: Any computer program listing may, and any computer program listing having over 300 lines (up to 72 characters per line) must, be submitted as an electronic document in ASCII plain text, whether submitted via the USPTO patent electronic filing system or on a read-only optical disc, in compliance with § 1.52(e). An electronic document containing such a computer program listing is to be referred to as a “Computer Program Listing Appendix.” The “Computer Program Listing Appendix” will not be part of the printed patent. The specification must include an incorporation by reference of the “Computer Program Listing Appendix,” in accordance with § 1.77(b)(5). (1) A “Computer Program Listing Appendix” must conform to the following requirements: (i) Computer compatibility: PC or Mac®; (ii) Operating system compatibility: MS-DOS®, MS-Windows®, Mac OS®, or Unix®/Linux®; (iii) Line terminator: ASCII CRLF or LF only; and (iv) Control codes: The data must not be dependent on control characters or codes that are not defined in the ASCII character set. (2) Each file must be named as *.txt, where “*” is one character or a combination of characters limited to upper- or lowercase letters, numbers, hyphens, and underscores and does not exceed 60 characters in total, excluding the extension. No spaces or other types of characters are permitted in the file name. (3) Each file containing a “Computer Program Listing Appendix” submitted via the USPTO patent electronic filing system must not exceed 25 MB, and file compression is not permitted. (4) A “Computer Program Listing Appendix” submitted in compliance with § 1.52(e) must conform to the following requirements: (i) A separate read-only optical disc containing a “Computer Program Listing Appendix” must be submitted for each applicable application; (ii) Multiple computer program listings for a single application may be placed on a single read-only optical disc; (iii) Multiple read-only optical discs, containing one or more computer program listings, may be submitted for a single application, if necessary; (iv) Any computer program listing may, and a computer program listing having a nested file structure must, when submitted in compliance with § 1.52(e), be compressed into a single file using WinZip®, 7-Zip, or Unix®/Linux® Zip; (v) Any compressed file must not be self-extracting; and (vi) A compressed ASCII plain text file that does not fit on a single read-only optical disc may be split into multiple file parts, in accordance with the target read-only optical disc size and labeled in compliance with § 1.52(e)(5)(vi). (5) Any amendments to a “Computer Program Listing Appendix” in electronic form in ASCII plain text format must include: (i) A replacement ASCII plain text file, in accordance with the requirements of this paragraph (c), submitted via the USPTO patent electronic filing system, or on a read-only optical disc, in compliance with § 1.52(e), where the replacement read-only optical disc must be submitted in duplicate, and the read-only optical discs must be labeled “COPY 1 REPLACEMENT MM/DD/YYYY” (with the month, day, and year of creation indicated) and “COPY 2 REPLACEMENT MM/DD/YYYY”; (ii) A request that the amendment be made by incorporation by reference of the material in the replacement ASCII plain text file, in a separate paragraph of the specification (replacing any prior such paragraph) identifying the name of the file, the date of creation, and the size of the file in bytes (see § 1.77(b)(5)); (iii) A statement that identifies the location of all deletions, replacements, or additions to the ASCII plain text file; and (iv) A statement that the replacement ASCII plain text file contains no new matter. (6) The specification of a complete application with a “Computer Program Listing Appendix” as an ASCII plain text file, filed on the application filing date, without an incorporation by reference of the material contained in the ASCII plain text file, must be amended to contain a separate paragraph incorporating by reference the material contained in the ASCII plain text file, in accordance with § 1.77(b)(5). (7) Any read-only optical disc for a “Computer Program Listing Appendix” must be submitted in duplicate. The read-only optical disc and duplicate copy must be labeled “Copy 1” and “Copy 2,” respectively. The transmittal letter that accompanies the read-only optical discs must include a statement that the two read-only optical discs are identical. In the event that the two read-only optical discs are not identical, the Office will use the read-only optical disc labeled “Copy 1” for further processing. Any amendment to the information on a read-only optical disc must be by way of a replacement read-only optical disc, in compliance with § 1.96(c)(5).

37 C.F.R. § 1.102 Advancement of examination.

(a) Applications will not be advanced out of turn for examination or for further action except as provided by this part, or upon order of the Director to expedite the business of the Office, or upon filing of a request under paragraph (b) or (e) of this section or upon filing a petition or request under paragraph (c) or (d) of this section with a showing which, in the opinion of the Director, will justify so advancing it. (b) Applications wherein the inventions are deemed of peculiar importance to some branch of the public service and the head of some department of the Government requests immediate action for that reason, may be advanced for examination. (c) A petition to make an application special may be filed without a fee if the basis for the petition is: (1) The applicant's age or health; or (2) That the invention will materially: (i) Enhance the quality of the environment; (ii) Contribute to the development or conservation of energy resources; or (iii) Contribute to countering terrorism. (d) A petition to make an application special on grounds other than those referred to in paragraph (c) of this section must be accompanied by the fee set forth in § 1.17(h). (e) A request for prioritized examination under this paragraph (e) must comply with the requirements of this paragraph (e) and be accompanied by the prioritized examination fee set forth in § 1.17(c), the processing fee set forth in § 1.17(i), and if not already paid, the publication fee set forth in § 1.18(d). An application for which prioritized examination has been requested may not contain or be amended to contain more than four independent claims, more than thirty total claims, or any multiple dependent claim. Prioritized examination under this paragraph (e) will not be accorded to international applications that have not entered the national stage under 35 U.S.C. 371, design applications, reissue applications, provisional applications, or reexamination proceedings. A request for prioritized examination must also comply with the requirements of paragraph (e)(1) or (2) of this section. No more than 15,000 requests for such prioritized examination will be accepted in any fiscal year. (1) A request for prioritized examination may be filed with an original utility or plant nonprovisional application under 35 U.S.C. 111(a). The application must include a specification as prescribed by 35 U.S.C. 112 including at least one claim, a drawing when necessary, and the inventor's oath or declaration on filing, except that the filing of an inventor's oath or declaration may be postponed in accordance with § 1.53(f)(3) if an application data sheet meeting the conditions specified in § 1.53(f)(3)(i) is present upon filing. If the application is a utility application, it must be filed via the USPTO patent electronic filing system and include the filing fee under § 1.16(a), search fee under § 1.16(k), and examination fee under § 1.16(o) upon filing. If the application is a plant application, it must include the filing fee under § 1.16(c), search fee under § 1.16(m), and examination fee under § 1.16(q) upon filing. The request for prioritized examination in compliance with this paragraph must be present upon filing of the application, except that the applicant may file an amendment to cancel any independent claims in excess of four, any total claims in excess of thirty, and any multiple dependent claim not later than one month from a first decision on the request for prioritized examination. This one-month time period is not extendable. (2) A request for prioritized examination may be filed with or after a request for continued examination in compliance with § 1.114. If the application is a utility application, the request must be filed via the USPTO patent electronic filing system. The request must be filed before the mailing of the first Office action after the filing of the request for continued examination under § 1.114. Only a single such request for prioritized examination under this paragraph may be granted in an application.

37 C.F.R. § 1.103 Suspension of action by the Office.

(a) Suspension for cause. On request of the applicant, the Office may grant a suspension of action by the Office under this paragraph for good and sufficient cause. The Office will not suspend action if a reply by applicant to an Office action is outstanding. Any petition for suspension of action under this paragraph must specify a period of suspension not exceeding six months. Any petition for suspension of action under this paragraph must also include: (1) A showing of good and sufficient cause for suspension of action; and (2) The fee set forth in § 1.17(g), unless such cause is the fault of the Office. (b) Limited suspension of action in a continued prosecution application (CPA) filed under § 1.53(d). On request of the applicant, the Office may grant a suspension of action by the Office under this paragraph in a continued prosecution application filed under § 1.53(d) for a period not exceeding three months. Any request for suspension of action under this paragraph must be filed with the request for an application filed under § 1.53(d), specify the period of suspension, and include the processing fee set forth in § 1.17(i). (c) Limited suspension of action after a request for continued examination (RCE) under § 1.114. On request of the applicant, the Office may grant a suspension of action by the Office under this paragraph after the filing of a request for continued examination in compliance with § 1.114 for a period not exceeding three months. Any request for suspension of action under this paragraph must be filed with the request for continued examination under § 1.114, specify the period of suspension, and include the processing fee set forth in § 1.17(i). (d) Deferral of examination. On request of the applicant, the Office may grant a deferral of examination under the conditions specified in this paragraph for a period not extending beyond three years from the earliest filing date for which a benefit is claimed under title 35, United States Code. A request for deferral of examination under this paragraph must include the publication fee set forth in § 1.18(d) and the processing fee set forth in § 1.17(i). A request for deferral of examination under this paragraph will not be granted unless: (1) The application is an original utility or plant application filed under § 1.53(b) or resulting from entry of an international application into the national stage after compliance with § 1.495; (2) The applicant has not filed a nonpublication request under § 1.213(a), or has filed a request under § 1.213(b) to rescind a previously filed nonpublication request; (3) The application is in condition for publication as provided in § 1.211(c); and (4) The Office has not issued either an Office action under 35 U.S.C. 132 or a notice of allowance under 35 U.S.C. 151. (e) Notice of suspension on initiative of the Office. The Office will notify applicant if the Office suspends action by the Office on an application on its own initiative. (f) Suspension of action for public safety or defense. The Office may suspend action by the Office by order of the Director if the following conditions are met: (1) The application is owned by the United States; (2) Publication of the invention may be detrimental to the public safety or defense; and (3) The appropriate department or agency requests such suspension.

37 C.F.R. § 1.104 Nature of examination.

(a) Examiner's action. (1) On taking up an application for examination or a patent in a reexamination proceeding, the examiner shall make a thorough study thereof and shall make a thorough investigation of the available prior art relating to the subject matter of the claimed invention. The examination shall be complete with respect both to compliance of the application or patent under reexamination with the applicable statutes and rules and to the patentability of the invention as claimed, as well as with respect to matters of form, unless otherwise indicated. (2) The applicant, or in the case of a reexamination proceeding, both the patent owner and the requester, will be notified of the examiner's action. The reasons for any adverse action or any objection or requirement will be stated in an Office action and such information or references will be given as may be useful in aiding the applicant, or in the case of a reexamination proceeding the patent owner, to judge the propriety of continuing the prosecution. (3) An international-type search will be made in all national applications filed on and after June 1, 1978. (4) Any national application may also have an international-type search report prepared thereon at the time of the national examination on the merits, upon specific written request therefor and payment of the international-type search report fee set forth in § 1.21(e). The Patent and Trademark Office does not require that a formal report of an international-type search be prepared in order to obtain a search fee refund in a later filed international application. (b) Completeness of examiner's action. The examiner's action will be complete as to all matters, except that in appropriate circumstances, such as misjoinder of invention, fundamental defects in the application, and the like, the action of the examiner may be limited to such matters before further action is made. However, matters of form need not be raised by the examiner until a claim is found allowable. (c) Rejection of claims. (1) If the invention is not considered patentable, or not considered patentable as claimed, the claims, or those considered unpatentable will be rejected. (2) In rejecting claims for want of novelty or for obviousness, the examiner must cite the best references at his or her command. When a reference is complex or shows or describes inventions other than that claimed by the applicant, the particular part relied on must be designated as nearly as practicable. The pertinence of each reference, if not apparent, must be clearly explained and each rejected claim specified. (3) In rejecting claims the examiner may rely upon admissions by the applicant, or the patent owner in a reexamination proceeding, as to any matter affecting patentability and, insofar as rejections in applications are concerned, may also rely upon facts within his or her knowledge pursuant to paragraph (d)(2) of this section. (4)(i) Subject matter which would otherwise qualify as prior art under 35 U.S.C. 102(a)(2) and a claimed invention will be treated as commonly owned for purposes of 35 U.S.C. 102(b)(2)(C) if the applicant or patent owner provides a statement to the effect that the subject matter and the claimed invention, not later than the effective filing date of the claimed invention, were owned by the same person or subject to an obligation of assignment to the same person. (ii) Subject matter which would otherwise qualify as prior art under 35 U.S.C. 102(a)(2) and a claimed invention will be treated as commonly owned for purposes of 35 U.S.C. 102(b)(2)(C) on the basis of a joint research agreement under 35 U.S.C. 102(c) if: (A) The applicant or patent owner provides a statement to the effect that the subject matter was developed and the claimed invention was made by or on behalf of one or more parties to a joint research agreement, within the meaning of 35 U.S.C. 100(h) and § 1.9(e), that was in effect on or before the effective filing date of the claimed invention, and the claimed invention was made as a result of activities undertaken within the scope of the joint research agreement; and (B) The application for patent for the claimed invention discloses or is amended to disclose the names of the parties to the joint research agreement. (5)(i) Subject matter which qualifies as prior art under 35 U.S.C. 102(e), (f), or (g) in effect prior to March 16, 2013, and a claimed invention in an application filed on or after November 29, 1999, or any patent issuing thereon, in an application filed before November 29, 1999, but pending on December 10, 2004, or any patent issuing thereon, or in any patent granted on or after December 10, 2004, will be treated as commonly owned for purposes of 35 U.S.C. 103(c) in effect prior to March 16, 2013, if the applicant or patent owner provides a statement to the effect that the subject matter and the claimed invention, at the time the claimed invention was made, were owned by the same person or subject to an obligation of assignment to the same person. (ii) Subject matter which qualifies as prior art under 35 U.S.C. 102(e), (f), or (g) in effect prior to March 16, 2013, and a claimed invention in an application pending on or after December 10, 2004, or in any patent granted on or after December 10, 2004, will be treated as commonly owned for purposes of 35 U.S.C. 103(c) in effect prior to March 16, 2013, on the basis of a joint research agreement under 35 U.S.C. 103(c)(2) in effect prior to March 16, 2013, if: (A) The applicant or patent owner provides a statement to the effect that the subject matter and the claimed invention were made by or on behalf of the parties to a joint research agreement, within the meaning of 35 U.S.C. 100(h) and § 1.9(e), which was in effect on or before the date the claimed invention was made, and that the claimed invention was made as a result of activities undertaken within the scope of the joint research agreement; and (B) The application for patent for the claimed invention discloses or is amended to disclose the names of the parties to the joint research agreement. (6) Patents issued prior to December 10, 2004, from applications filed prior to November 29, 1999, are subject to 35 U.S.C. 103(c) in effect on November 28, 1999. (d) Citation of references. (1) If domestic patents are cited by the examiner, their numbers and dates, and the names of the patentees will be stated. If domestic patent application publications are cited by the examiner, their publication number, publication date, and the names of the applicants will be stated. If foreign published applications or patents are cited, their nationality or country, numbers and dates, and the names of the patentees will be stated, and such other data will be furnished as may be necessary to enable the applicant, or in the case of a reexamination proceeding, the patent owner, to identify the published applications or patents cited. In citing foreign published applications or patents, in case only a part of the document is involved, the particular pages and sheets containing the parts relied upon will be identified. If printed publications are cited, the author (if any), title, date, pages or plates, and place of publication, or place where a copy can be found, will be given. (2) When a rejection in an application is based on facts within the personal knowledge of an employee of the Office, the data shall be as specific as possible, and the reference must be supported, when called for by the applicant, by the affidavit of such employee, and such affidavit shall be subject to contradiction or explanation by the affidavits of the applicant and other persons. (e) Reasons for allowance. If the examiner believes that the record of the prosecution as a whole does not make clear his or her reasons for allowing a claim or claims, the examiner may set forth such reasoning. The reasons shall be incorporated into an Office action rejecting other claims of the application or patent under reexamination or be the subject of a separate communication to the applicant or patent owner. The applicant or patent owner may file a statement commenting on the reasons for allowance within such time as may be specified by the examiner. Failure by the examiner to respond to any statement commenting on reasons for allowance does not give rise to any implication.

37 C.F.R. § 1.105 Requirements for information.

(a)(1) In the course of examining or treating a matter in a pending or abandoned application, in a patent, or in a reexamination proceeding, including a reexamination proceeding ordered as a result of a supplemental examination proceeding, the examiner or other Office employee may require the submission, from individuals identified under § 1.56(c), or any assignee, of such information as may be reasonably necessary to properly examine or treat the matter, for example: (i) Commercial databases: The existence of any particularly relevant commercial database known to any of the inventors that could be searched for a particular aspect of the invention. (ii) Search: Whether a search of the prior art was made, and if so, what was searched. (iii) Related information: A copy of any non-patent literature, published application, or patent (U.S. or foreign), by any of the inventors, that relates to the claimed invention. (iv) Information used to draft application: A copy of any non-patent literature, published application, or patent (U.S. or foreign) that was used to draft the application. (v) Information used in invention process: A copy of any non-patent literature, published application, or patent (U.S. or foreign) that was used in the invention process, such as by designing around or providing a solution to accomplish an invention result. (vi) Improvements: Where the claimed invention is an improvement, identification of what is being improved. (vii) In use: Identification of any use of the claimed invention known to any of the inventors at the time the application was filed notwithstanding the date of the use. (viii) Technical information known to applicant. Technical information known to applicant concerning the related art, the disclosure, the claimed subject matter, other factual information pertinent to patentability, or concerning the accuracy of the examiner's stated interpretation of such items. (2) Requirements for factual information known to applicant may be presented in any appropriate manner, for example: (i) A requirement for factual information; (ii) Interrogatories in the form of specific questions seeking applicant's factual knowledge; or (iii) Stipulations as to facts with which the applicant may agree or disagree. (3) Any reply to a requirement for information pursuant to this section that states either that the information required to be submitted is unknown to or is not readily available to the party or parties from which it was requested may be accepted as a complete reply. (b) The requirement for information of paragraph (a)(1) of this section may be included in an Office action, or sent separately. (c) A reply, or a failure to reply, to a requirement for information under this section will be governed by §§ 1.135 and 1.136.

37 C.F.R. § 1.109 Effective filing date of a claimed invention under the Leahy-Smith America Invents Act.

(a) The effective filing date for a claimed invention in a patent or application for patent, other than in a reissue application or reissued patent, is the earliest of: (1) The actual filing date of the patent or the application for the patent containing a claim to the invention; or (2) The filing date of the earliest application for which the patent or application is entitled, as to such invention, to a right of priority or the benefit of an earlier filing date under 35 U.S.C. 119, 120, 121, 365, or 386. (b) The effective filing date for a claimed invention in a reissue application or a reissued patent is determined by deeming the claim to the invention to have been contained in the patent for which reissue was sought.

37 C.F.R. § 1.110 Inventorship and ownership of the subject matter of individual claims.

When one or more joint inventors are named in an application or patent, the Office may require an applicant or patentee to identify the inventorship and ownership or obligation to assign ownership, of each claimed invention on its effective filing date (as defined in § 1.109) or on its date of invention, as applicable, when necessary for purposes of an Office proceeding. The Office may also require an applicant or patentee to identify the invention dates of the subject matter of each claim when necessary for purposes of an Office proceeding.

37 C.F.R. § 1.151 Rules applicable.

The rules relating to applications for patents for other inventions or discoveries are also applicable to applications for patents for designs except as otherwise provided.

37 C.F.R. § 1.152 Design drawings.

The design must be represented by a drawing that complies with the requirements of § 1.84 and must contain a sufficient number of views to constitute a complete disclosure of the appearance of the design. Appropriate and adequate surface shading should be used to show the character or contour of the surfaces represented. Solid black surface shading is not permitted except when used to represent the color black as well as color contrast. Broken lines may be used to show visible environmental structure, but may not be used to show hidden planes and surfaces that cannot be seen through opaque materials. Alternate positions of a design component, illustrated by full and broken lines in the same view are not permitted in a design drawing. Photographs and ink drawings are not permitted to be combined as formal drawings in one application. Photographs submitted in lieu of ink drawings in design patent applications must not disclose environmental structure but must be limited to the design claimed for the article.

37 C.F.R. § 1.153 Title, description and claim, oath or declaration.

(a) The title of the design must designate the particular article. No description, other than a reference to the drawing, is ordinarily required. The claim shall be in formal terms to the ornamental design for the article (specifying name) as shown, or as shown and described. More than one claim is neither required nor permitted. (b) The inventor's oath or declaration must comply with the requirements of § 1.63, or comply with the requirements of § 1.64 for a substitute statement.

37 C.F.R. § 1.154 Arrangement of application elements in a design application.

(a) The elements of the design application, if applicable, should appear in the following order: (1) Design application transmittal form. (2) Fee transmittal form. (3) Application data sheet (see § 1.76). (4) Specification. (5) Drawings or photographs. (6) The inventor's oath or declaration (see § 1.153(b)). (b) The specification should include the following sections in order: (1) Preamble, stating the name of the applicant, title of the design, and a brief description of the nature and intended use of the article in which the design is embodied. (2) Cross-reference to related applications (unless included in the application data sheet). (3) Statement regarding federally sponsored research or development. (4) Description of the figure or figures of the drawing. (5) Feature description. (6) A single claim. (c) The text of the specification sections defined in paragraph (b) of this section, if applicable, should be preceded by a section heading in uppercase letters without underlining or bold type.

37 C.F.R. § 1.155 Expedited examination of design applications.

(a) The applicant may request that the Office expedite the examination of a design application. To qualify for expedited examination: (1) The application must include drawings in compliance with § 1.84, or for an international design application that designates the United States, must have been published pursuant to Hague Agreement Article 10(3); (2) The applicant must have conducted a preexamination search; and (3) The applicant must file a request for expedited examination including: (i) The fee set forth in § 1.17(k); and (ii) A statement that a preexamination search was conducted. The statement must also indicate the field of search and include an information disclosure statement in compliance with § 1.98. (b) The Office will not examine an application that is not in condition for examination (e.g., missing basic filing fee) even if the applicant files a request for expedited examination under this section.

37 C.F.R. § 1.63 Inventor's oath or declaration.

(a) The inventor, or each individual who is a joint inventor of a claimed invention, in an application for patent must execute an oath or declaration directed to the application, except as provided for in § 1.64. An oath or declaration under this section must: (1) Identify the inventor or joint inventor executing the oath or declaration by his or her legal name; (2) Identify the application to which it is directed; (3) Include a statement that the person executing the oath or declaration believes the named inventor or joint inventor to be the original inventor or an original joint inventor of a claimed invention in the application for which the oath or declaration is being submitted; and (4) State that the application was made or was authorized to be made by the person executing the oath or declaration. (b) Unless the following information is supplied in an application data sheet in accordance with § 1.76, the oath or declaration must also identify: (1) Each inventor by his or her legal name; and (2) A mailing address where the inventor customarily receives mail, and residence, if an inventor lives at a location which is different from where the inventor customarily receives mail, for each inventor. (c) A person may not execute an oath or declaration for an application unless that person has reviewed and understands the contents of the application, including the claims, and is aware of the duty to disclose to the Office all information known to the person to be material to patentability as defined in § 1.56. There is no minimum age for a person to be qualified to execute an oath or declaration, but the person must be competent to execute, i.e., understand, the document that the person is executing. (d)(1) A newly executed oath or declaration under § 1.63, or substitute statement under § 1.64, is not required under §§ 1.51(b)(2) and 1.53(f), or under §§ 1.497 and 1.1021(d), for an inventor in a continuing application that claims the benefit under 35 U.S.C. 120, 121, 365(c), or 386(c) in compliance with § 1.78 of an earlier-filed application, provided that an oath or declaration in compliance with this section, or substitute statement under § 1.64, was executed by or with respect to such inventor and was filed in the earlier-filed application, and a copy of such oath, declaration, or substitute statement showing the signature or an indication thereon that it was executed, is submitted in the continuing application. (2) The inventorship of a continuing application filed under 35 U.S.C. 111(a) is the inventor or joint inventors specified in the application data sheet filed before or concurrently with the copy of the inventor's oath or declaration from the earlier-filed application. If an application data sheet is not filed before or concurrently with the copy of the inventor's oath or declaration from the earlier-filed application, the inventorship is the inventorship set forth in the copy of the inventor's oath or declaration from the earlier-filed application, unless it is accompanied by a statement signed pursuant to § 1.33(b) stating the name of each inventor in the continuing application. (3) Any new joint inventor named in the continuing application must provide an oath or declaration in compliance with this section, except as provided for in § 1.64. (e)(1) An assignment may also serve as an oath or declaration required by this section if the assignment as executed: (i) Includes the information and statements required under paragraphs (a) and (b) of this section; and (ii) A copy of the assignment is recorded as provided for in part 3 of this chapter. (2) Any reference to an oath or declaration under this section includes an assignment as provided for in this paragraph. (f) With respect to an application naming only one inventor, any reference to the inventor's oath or declaration in this chapter includes a substitute statement executed under § 1.64. With respect to an application naming more than one inventor, any reference to the inventor's oath or declaration in this chapter means the oaths, declarations, or substitute statements that have been collectively executed by or with respect to all of the joint inventors, unless otherwise clear from the context. (g) An oath or declaration under this section, including the statement provided for in paragraph (e) of this section, must be executed (i.e., signed) in accordance either with § 1.66 or with an acknowledgment that any willful false statement made in such declaration or statement is punishable under 18 U.S.C. 1001 by fine or imprisonment of not more than five (5) years, or both. (h) An oath or declaration filed at any time pursuant to 35 U.S.C. 115(h)(1) will be placed in the file record of the application or patent, but may not necessarily be reviewed by the Office. Any request for correction of the named inventorship must comply with § 1.48 in an application and § 1.324 in a patent.

37 C.F.R. § 1.64 Substitute statement in lieu of an oath or declaration.

(a) An applicant under § 1.43, 1.45 or 1.46 may execute a substitute statement in lieu of an oath or declaration under § 1.63 if the inventor is deceased, is under a legal incapacity, has refused to execute the oath or declaration under § 1.63, or cannot be found or reached after diligent effort. (b) A substitute statement under this section must: (1) Comply with the requirements of § 1.63(a), identifying the inventor or joint inventor with respect to whom a substitute statement in lieu of an oath or declaration is executed, and stating upon information and belief the facts which such inventor is required to state; (2) Identify the person executing the substitute statement and the relationship of such person to the inventor or joint inventor with respect to whom the substitute statement is executed, and unless such information is supplied in an application data sheet in accordance with § 1.76, the residence and mailing address of the person signing the substitute statement; (3) Identify the circumstances permitting the person to execute the substitute statement in lieu of an oath or declaration under § 1.63, namely whether the inventor is deceased, is under a legal incapacity, cannot be found or reached after a diligent effort was made, or has refused to execute the oath or declaration under § 1.63; and (4) Unless the following information is supplied in an application data sheet in accordance with § 1.76, also identify: (i) Each inventor by his or her legal name; and (ii) The last known mailing address where the inventor customarily receives mail, and last known residence, if an inventor lives at a location which is different from where the inventor customarily receives mail, for each inventor who is not deceased or under a legal incapacity. (c) A person may not execute a substitute statement provided for in this section for an application unless that person has reviewed and understands the contents of the application, including the claims, and is aware of the duty to disclose to the Office all information known to the person to be material to patentability as defined in § 1.56. (d) Any reference to an inventor's oath or declaration includes a substitute statement provided for in this section. (e) A substitute statement under this section must contain an acknowledgment that any willful false statement made in such statement is punishable under section 1001 of title 18 by fine or imprisonment of not more than 5 years, or both. (f) A nonsigning inventor or legal representative may subsequently join in the application by submitting an oath or declaration under § 1.63. The submission of an oath or declaration by a nonsigning inventor or legal representative in an application filed under § 1.43, 1.45 or 1.46 will not permit the nonsigning inventor or legal representative to revoke or grant a power of attorney.

37 C.F.R. § 1.66 Statements under oath.

An oath or affirmation may be made before any person within the United States authorized by law to administer oaths. An oath made in a foreign country may be made before any diplomatic or consular officer of the United States authorized to administer oaths, or before any officer having an official seal and authorized to administer oaths in the foreign country in which the applicant may be, whose authority shall be proved by a certificate of a diplomatic or consular officer of the United States, or by an apostille of an official designated by a foreign country which, by treaty or convention, accords like effect to apostilles of designated officials in the United States. The oath shall be attested in all cases in this and other countries, by the proper official seal of the officer before whom the oath or affirmation is made. Such oath or affirmation shall be valid as to execution if it complies with the laws of the State or country where made. When the person before whom the oath or affirmation is made in this country is not provided with a seal, his official character shall be established by competent evidence, as by a certificate from a clerk of a court of record or other proper officer having a seal.

37 C.F.R. § 1.67 Supplemental oath or declaration.

(a) The applicant may submit an inventor's oath or declaration meeting the requirements of § 1.63, § 1.64, or § 1.162 to correct any deficiencies or inaccuracies present in an earlier-filed inventor's oath or declaration. Deficiencies or inaccuracies due to the failure to meet the requirements of § 1.63(b) in an oath or declaration may be corrected with an application data sheet in accordance with § 1.76, except that any correction of inventorship must be pursuant to § 1.48. (b) A supplemental inventor's oath or declaration under this section must be executed by the person whose inventor's oath or declaration is being withdrawn, replaced, or otherwise corrected. (c) The Office will not require a person who has executed an oath or declaration in compliance with 35 U.S.C. 115 and § 1.63 or 1.162 for an application to provide an additional inventor's oath or declaration for the application. (d) No new matter may be introduced into a nonprovisional application after its filing date even if an inventor's oath or declaration is filed to correct deficiencies or inaccuracies present in the earlier-filed inventor's oath or declaration.

37 C.F.R. § 1.68 Declaration in lieu of oath.

Any document to be filed in the Patent and Trademark Office and which is required by any law, rule, or other regulation to be under oath may be subscribed to by a written declaration. Such declaration may be used in lieu of the oath otherwise required, if, and only if, the declarant is on the same document, warned that willful false statements and the like are punishable by fine or imprisonment, or both (18 U.S.C. 1001) and may jeopardize the validity of the application or any patent issuing thereon. The declarant must set forth in the body of the declaration that all statements made of the declarant's own knowledge are true and that all statements made on information and belief are believed to be true.

37 C.F.R. § 1.69 Foreign language oaths and declarations.

(a) Whenever an individual making an oath or declaration cannot understand English, the oath or declaration must be in a language that such individual can understand and shall state that such individual understands the content of any documents to which the oath or declaration relates. (b) Unless the text of any oath or declaration in a language other than English is in a form provided by the Patent and Trademark Office or in accordance with PCT Rule 4.17(iv), it must be accompanied by an English translation together with a statement that the translation is accurate, except that in the case of an oath or declaration filed under § 1.63, the translation may be filed in the Office no later than two months from the date applicant is notified to file the translation.

37 C.F.R. § 1.111 Reply by applicant or patent owner to a non-final Office action.

(a)(1) If the Office action after the first examination (§ 1.104) is adverse in any respect, the applicant or patent owner, if he or she persists in his or her application for a patent or reexamination proceeding, must reply and request reconsideration or further examination, with or without amendment. See §§ 1.135 and 1.136 for time for reply to avoid abandonment. (2) Supplemental replies. (i) A reply that is supplemental to a reply that is in compliance with § 1.111(b) will not be entered as a matter of right except as provided in paragraph (a)(2)(ii) of this section. The Office may enter a supplemental reply if the supplemental reply is clearly limited to: (A) Cancellation of a claim(s); (B) Adoption of the examiner suggestion(s); (C) Placement of the application in condition for allowance; (D) Reply to an Office requirement made after the first reply was filed; (E) Correction of informalities (e.g., typographical errors); or (F) Simplification of issues for appeal. (ii) A supplemental reply will be entered if the supplemental reply is filed within the period during which action by the Office is suspended under § 1.103(a) or (c). (b) In order to be entitled to reconsideration or further examination, the applicant or patent owner must reply to the Office action. The reply by the applicant or patent owner must be reduced to a writing which distinctly and specifically points out the supposed errors in the examiner's action and must reply to every ground of objection and rejection in the prior Office action. The reply must present arguments pointing out the specific distinctions believed to render the claims, including any newly presented claims, patentable over any applied references. If the reply is with respect to an application, a request may be made that objections or requirements as to form not necessary to further consideration of the claims be held in abeyance until allowable subject matter is indicated. The applicant's or patent owner's reply must appear throughout to be a bona fide attempt to advance the application or the reexamination proceeding to final action. A general allegation that the claims define a patentable invention without specifically pointing out how the language of the claims patentably distinguishes them from the references does not comply with the requirements of this section. (c) In amending in reply to a rejection of claims in an application or patent under reexamination, the applicant or patent owner must clearly point out the patentable novelty which he or she thinks the claims present in view of the state of the art disclosed by the references cited or the objections made. The applicant or patent owner must also show how the amendments avoid such references or objections.

37 C.F.R. § 1.112 Reconsideration before final action.

After reply by applicant or patent owner (§ 1.111 or § 1.945) to a non-final action and any comments by an inter partes reexamination requester (§ 1.947), the application or the patent under reexamination will be reconsidered and again examined. The applicant, or in the case of a reexamination proceeding the patent owner and any third party requester, will be notified if claims are rejected, objections or requirements made, or decisions favorable to patentability are made, in the same manner as after the first examination (§ 1.104). Applicant or patent owner may reply to such Office action in the same manner provided in § 1.111 or § 1.945, with or without amendment, unless such Office action indicates that it is made final (§ 1.113) or an appeal (§ 41.31 of this title) has been taken (§ 1.116), or in an inter partes reexamination, that it is an action closing prosecution (§ 1.949) or a right of appeal notice (§ 1.953).

37 C.F.R. § 1.113 Final rejection or action.

(a) On the second or any subsequent examination or consideration by the examiner the rejection or other action may be made final, whereupon applicant's, or for ex parte reexaminations filed under § 1.510, patent owner's reply is limited to appeal in the case of rejection of any claim (§ 41.31 of this title), or to amendment as specified in § 1.114 or § 1.116. Petition may be taken to the Director in the case of objections or requirements not involved in the rejection of any claim (§ 1.181). Reply to a final rejection or action must comply with § 1.114 or paragraph (c) of this section. For final actions in an inter partes reexamination filed under § 1.913, see § 1.953. (b) In making such final rejection, the examiner shall repeat or state all grounds of rejection then considered applicable to the claims in the application, clearly stating the reasons in support thereof. (c) Reply to a final rejection or action must include cancellation of, or appeal from the rejection of, each rejected claim. If any claim stands allowed, the reply to a final rejection or action must comply with any requirements or objections as to form.

37 C.F.R. § 1.114 Request for continued examination.

(a) If prosecution in an application is closed, an applicant may request continued examination of the application by filing a submission and the fee set forth in § 1.17(e) prior to the earliest of: (1) Payment of the issue fee, unless a petition under § 1.313 is granted; (2) Abandonment of the application; or (3) The filing of a notice of appeal to the U.S. Court of Appeals for the Federal Circuit under 35 U.S.C. 141, or the commencement of a civil action under 35 U.S.C. 145 or 146, unless the appeal or civil action is terminated. (b) Prosecution in an application is closed as used in this section means that the application is under appeal, or that the last Office action is a final action (§ 1.113), a notice of allowance (§ 1.311), or an action that otherwise closes prosecution in the application. (c) A submission as used in this section includes, but is not limited to, an information disclosure statement, an amendment to the written description, claims, or drawings, new arguments, or new evidence in support of patentability. If reply to an Office action under 35 U.S.C. 132 is outstanding, the submission must meet the reply requirements of § 1.111. (d) If an applicant timely files a submission and fee set forth in § 1.17(e), the Office will withdraw the finality of any Office action and the submission will be entered and considered. If an applicant files a request for continued examination under this section after appeal, but prior to a decision on the appeal, it will be treated as a request to withdraw the appeal and to reopen prosecution of the application before the examiner. An appeal brief (§ 41.37 of this title) or a reply brief (§ 41.41 of this title), or related papers, will not be considered a submission under this section. (e) The provisions of this section do not apply to: (1) A provisional application; (2) An application for a utility or plant patent filed under 35 U.S.C. 111(a) before June 8, 1995; (3) An international application filed under 35 U.S.C. 363 before June 8, 1995, or an international application that does not comply with 35 U.S.C. 371; (4) An application for a design patent; (5) An international design application; or (6) A patent under reexamination.

37 C.F.R. § 1.335 Filing of notice of arbitration awards.

(a) Written notice of any award by an arbitrator pursuant to 35 U.S.C. 294 must be filed in the Patent and Trademark Office by the patentee, or the patentee's assignee or licensee. If the award involves more than one patent a separate notice must be filed for placement in the file of each patent. The notice must set forth the patent number, the names of the inventor and patent owner, and the names and addresses of the parties to the arbitration. The notice must also include a copy of the award. (b) If an award by an arbitrator pursuant to 35 U.S.C. 294 is modified by a court, the party requesting the modification must file in the Patent and Trademark Office, a notice of the modification for placement in the file of each patent to which the modification applies. The notice must set forth the patent number, the names of the inventor and patent owner, and the names and addresses of the parties to the arbitration. The notice must also include a copy of the court's order modifying the award. (c) Any award by an arbitrator pursuant to 35 U.S.C. 294 shall be unenforceable until any notices required by paragraph (a) or (b) of this section are filed in the Patent and Trademark Office. If any required notice is not filed by the party designated in paragraph (a) or (b) of this section, any party to the arbitration proceeding may file such a notice.

37 C.F.R. § 1.115 Preliminary amendments.

(a) A preliminary amendment is an amendment that is received in the Office (§ 1.6) on or before the mail date of the first Office action under § 1.104. The patent application publication may include preliminary amendments (§ 1.215(a)). (1) A preliminary amendment that is present on the filing date of an application is part of the original disclosure of the application. (2) A preliminary amendment filed after the filing date of the application is not part of the original disclosure of the application. (b) A preliminary amendment in compliance with § 1.121 will be entered unless disapproved by the Director. (1) A preliminary amendment seeking cancellation of all the claims without presenting any new or substitute claims will be disapproved. (2) A preliminary amendment may be disapproved if the preliminary amendment unduly interferes with the preparation of a first Office action in an application. Factors that will be considered in disapproving a preliminary amendment include: (i) The state of preparation of a first Office action as of the date of receipt (§ 1.6) of the preliminary amendment by the Office; and (ii) The nature of any changes to the specification or claims that would result from entry of the preliminary amendment. (3) A preliminary amendment will not be disapproved under (b)(2) of this section if it is filed no later than: (i) Three months from the filing date of an application under § 1.53(b); (ii) The filing date of a continued prosecution application under § 1.53(d); or (iii) Three months from the date the national stage is entered as set forth in § 1.491 in an international application. (4) The time periods specified in paragraph (b)(3) of this section are not extendable.

37 C.F.R. § 1.116 Amendments and affidavits or other evidence after final action and prior to appeal.

(a) An amendment after final action must comply with § 1.114 or this section. (b) After a final rejection or other final action (§ 1.113) in an application or in an ex parte reexamination filed under § 1.510, or an action closing prosecution (§ 1.949) in an inter partes reexamination filed under § 1.913, but before or on the same date of filing an appeal (§ 41.31 or § 41.61 of this title): (1) An amendment may be made canceling claims or complying with any requirement of form expressly set forth in a previous Office action; (2) An amendment presenting rejected claims in better form for consideration on appeal may be admitted; or (3) An amendment touching the merits of the application or patent under reexamination may be admitted upon a showing of good and sufficient reasons why the amendment is necessary and was not earlier presented. (c) The admission of, or refusal to admit, any amendment after a final rejection, a final action, an action closing prosecution, or any related proceedings will not operate to relieve the application or reexamination proceeding from its condition as subject to appeal or to save the application from abandonment under § 1.135, or the reexamination prosecution from termination under § 1.550(d) or § 1.957(b) or limitation of further prosecution under § 1.957(c). (d)(1) Notwithstanding the provisions of paragraph (b) of this section, no amendment other than canceling claims, where such cancellation does not affect the scope of any other pending claim in the proceeding, can be made in an inter partes reexamination proceeding after the right of appeal notice under § 1.953 except as provided in § 1.981 or as permitted by § 41.77(b)(1) of this title. (2) Notwithstanding the provisions of paragraph (b) of this section, an amendment made after a final rejection or other final action (§ 1.113) in an ex parte reexamination filed under § 1.510, or an action closing prosecution (§ 1.949) in an inter partes reexamination filed under § 1.913 may not cancel claims where such cancellation affects the scope of any other pending claim in the reexamination proceeding except as provided in § 1.981 or as permitted by § 41.77(b)(1) of this title. (e) An affidavit or other evidence submitted after a final rejection or other final action (§ 1.113) in an application or in an ex parte reexamination filed under § 1.510, or an action closing prosecution (§ 1.949) in an inter partes reexamination filed under § 1.913 but before or on the same date of filing an appeal (§ 41.31 or § 41.61 of this title), may be admitted upon a showing of good and sufficient reasons why the affidavit or other evidence is necessary and was not earlier presented. (f) Notwithstanding the provisions of paragraph (e) of this section, no affidavit or other evidence can be made in an inter partes reexamination proceeding after the right of appeal notice under § 1.953 except as provided in § 1.981 or as permitted by § 41.77(b)(1) of this title. (g) After decision on appeal, amendments, affidavits and other evidence can only be made as provided in §§ 1.198 and 1.981, or to carry into effect a recommendation under § 41.50(c) of this title.

37 C.F.R. § 1.121 Manner of making amendments in applications.

(a) Amendments in applications, other than reissue applications. Amendments in applications, other than reissue applications, are made by filing a paper, in compliance with § 1.52, directing that specified amendments be made. (b) Specification. Amendments to the specification, other than the claims, “Large Tables” (§ 1.58(c)), a “Computer Program Listing Appendix” (§ 1.96(c)(5) and (7)), a “Sequence Listing” (§ 1.825), or a “Sequence Listing XML” (§ 1.835), must be made by adding, deleting, or replacing a paragraph; by replacing a section; or by providing a substitute specification, in the manner specified in this section. (1) Amendment to delete, replace, or add a paragraph. Amendments to the specification, including amendment to a section heading or the title of the invention which are considered for amendment purposes to be an amendment of a paragraph, must be made by submitting: (i) An instruction, which unambiguously identifies the location, to delete one or more paragraphs of the specification, replace a paragraph with one or more replacement paragraphs, or add one or more paragraphs; (ii) The full text of any replacement paragraph with markings to show all the changes relative to the previous version of the paragraph. The text of any added subject matter must be shown by underlining the added text. The text of any deleted matter must be shown by strike-through except that double brackets placed before and after the deleted characters may be used to show deletion of five or fewer consecutive characters. The text of any deleted subject matter must be shown by being placed within double brackets if strike-through cannot be easily perceived; (iii) The full text of any added paragraphs without any underlining; and (iv) The text of a paragraph to be deleted must not be presented with strike-through or placed within double brackets. The instruction to delete may identify a paragraph by its paragraph number or include a few words from the beginning, and end, of the paragraph, if needed for paragraph identification purposes. (2) Amendment by replacement section. If the sections of the specification contain section headings as provided in § 1.77(b), § 1.154(b), or § 1.163(c), amendments to the specification, other than the claims, may be made by submitting: (i) A reference to the section heading along with an instruction, which unambiguously identifies the location, to delete that section of the specification and to replace such deleted section with a replacement section; and (ii) A replacement section with markings to show all changes relative to the previous version of the section. The text of any added subject matter must be shown by underlining the added text. The text of any deleted matter must be shown by strike-through except that double brackets placed before and after the deleted characters may be used to show deletion of five or fewer consecutive characters. The text of any deleted subject matter must be shown by being placed within double brackets if strike-through cannot be easily perceived. (3) Amendment by substitute specification. The specification, other than the claims, may also be amended by submitting: (i) An instruction to replace the specification; and (ii) A substitute specification in compliance with §§ 1.125(b) and (c). (4) Reinstatement of previously deleted paragraph or section. A previously deleted paragraph or section may be reinstated only by a subsequent amendment adding the previously deleted paragraph or section. (5) Presentation in subsequent amendment document. Once a paragraph or section is amended in a first amendment document, the paragraph or section shall not be re-presented in a subsequent amendment document unless it is amended again or a substitute specification is provided. (6) Amendments to “Large Tables,” a “Computer Program Listing Appendix,” a “Sequence Listing,” or a “Sequence Listing XML.” Changes to “Large Tables,” a “Computer Program Listing Appendix,” a “Sequence Listing,” or a “Sequence Listing XML” must be made in accordance with § 1.58(g) for “Large Tables,” § 1.96(c)(5) for a “Computer Program Listing Appendix,” § 1.825 for a “Sequence Listing,” or § 1.835 for a “Sequence Listing XML.” (c) Claims. Amendments to a claim must be made by rewriting the entire claim with all changes (e.g., additions and deletions) as indicated in this subsection, except when the claim is being canceled. Each amendment document that includes a change to an existing claim, cancellation of an existing claim or addition of a new claim, must include a complete listing of all claims ever presented, including the text of all pending and withdrawn claims, in the application. The claim listing, including the text of the claims, in the amendment document will serve to replace all prior versions of the claims, in the application. In the claim listing, the status of every claim must be indicated after its claim number by using one of the following identifiers in a parenthetical expression: (Original), (Currently amended), (Canceled), (Withdrawn), (Previously presented), (New), and (Not entered). (1) Claim listing. All of the claims presented in a claim listing shall be presented in ascending numerical order. Consecutive claims having the same status of “canceled” or “not entered” may be aggregated into one statement (e.g., Claims 1-5 (canceled)). The claim listing shall commence on a separate sheet of the amendment document and the sheet(s) that contain the text of any part of the claims shall not contain any other part of the amendment. (2) When claim text with markings is required. All claims being currently amended in an amendment paper shall be presented in the claim listing, indicate a status of “currently amended,” and be submitted with markings to indicate the changes that have been made relative to the immediate prior version of the claims. The text of any added subject matter must be shown by underlining the added text. The text of any deleted matter must be shown by strike-through except that double brackets placed before and after the deleted characters may be used to show deletion of five or fewer consecutive characters. The text of any deleted subject matter must be shown by being placed within double brackets if strike-through cannot be easily perceived. Only claims having the status of “currently amended,” or “withdrawn” if also being amended, shall include markings. If a withdrawn claim is currently amended, its status in the claim listing may be identified as “withdrawn—currently amended.” (3) When claim text in clean version is required. The text of all pending claims not being currently amended shall be presented in the claim listing in clean version, i.e., without any markings in the presentation of text. The presentation of a clean version of any claim having the status of “original,” “withdrawn” or “previously presented” will constitute an assertion that it has not been changed relative to the immediate prior version, except to omit markings that may have been present in the immediate prior version of the claims of the status of “withdrawn” or “previously presented.” Any claim added by amendment must be indicated with the status of “new” and presented in clean version, i.e., without any underlining. (4) When claim text shall not be presented; canceling a claim. (i) No claim text shall be presented for any claim in the claim listing with the status of “canceled” or “not entered.” (ii) Cancellation of a claim shall be effected by an instruction to cancel a particular claim number. Identifying the status of a claim in the claim listing as “canceled” will constitute an instruction to cancel the claim. (5) Reinstatement of previously canceled claim. A claim which was previously canceled may be reinstated only by adding the claim as a “new” claim with a new claim number. (d) Drawings. One or more application drawings shall be amended in the following manner: Any changes to an application drawing must be in compliance with § 1.84 or, for a nonprovisional international design application, in compliance with §§ 1.84(c) and 1.1026 and must be submitted on a replacement sheet of drawings which shall be an attachment to the amendment document and, in the top margin, labeled “Replacement Sheet.” Any replacement sheet of drawings shall include all of the figures appearing on the immediate prior version of the sheet, even if only one figure is amended. Any new sheet of drawings containing an additional figure must be labeled in the top margin as “New Sheet.” All changes to the drawings shall be explained, in detail, in either the drawing amendment or remarks section of the amendment paper. (1) A marked-up copy of any amended drawing figure, including annotations indicating the changes made, may be included. The marked-up copy must be clearly labeled as “Annotated Sheet” and must be presented in the amendment or remarks section that explains the change to the drawings. (2) A marked-up copy of any amended drawing figure, including annotations indicating the changes made, must be provided when required by the examiner. (e) Disclosure consistency. The disclosure must be amended, when required by the Office, to correct inaccuracies of description and definition, and to secure substantial correspondence between the claims, the remainder of the specification, and the drawings. (f) No new matter. No amendment may introduce new matter into the disclosure of an application. (g) Exception for examiner's amendments. Changes to the specification, including the claims, of an application made by the Office in an examiner's amendment may be made by specific instructions to insert or delete subject matter set forth in the examiner's amendment by identifying the precise point in the specification or the claim(s) where the insertion or deletion is to be made. Compliance with paragraphs (b)(1), (b)(2), or (c) of this section is not required. (h) Amendment sections. Each section of an amendment document (e.g., amendment to the claims, amendment to the specification, replacement drawings, and remarks) must begin on a separate sheet. (i) Amendments in reissue applications. Any amendment to the description and claims in reissue applications must be made in accordance with § 1.173. (j) Amendments in reexamination proceedings. Any proposed amendment to the description and claims in patents involved in reexamination proceedings must be made in accordance with § 1.530. (k) Amendments in provisional applications. Amendments in provisional applications are not usually made. If an amendment is made to a provisional application, however, it must comply with the provisions of this section. Any amendments to a provisional application shall be placed in the provisional application file but may not be entered.

37 C.F.R. § 1.125 Substitute specification.

(a) If the number or nature of the amendments or the legibility of the application papers renders it difficult to consider the application, or to arrange the papers for printing or copying, the Office may require the entire specification, including the claims, or any part thereof, be rewritten. (b) Subject to § 1.312, a substitute specification, excluding the claims, may be filed at any point up to payment of the issue fee if it is accompanied by a statement that the substitute specification includes no new matter. (c) A substitute specification submitted under this section must be submitted with markings showing all the changes relative to the immediate prior version of the specification of record. The text of any added subject matter must be shown by underlining the added text. The text of any deleted matter must be shown by strike-through except that double brackets placed before and after the deleted characters may be used to show deletion of five or fewer consecutive characters. The text of any deleted subject matter must be shown by being placed within double brackets if strike-through cannot be easily perceived. An accompanying clean version (without markings) must also be supplied. Numbering the paragraphs of the specification of record is not considered a change that must be shown pursuant to this paragraph. (d) A substitute specification under this section is not permitted in a reissue application or in a reexamination proceeding.

37 C.F.R. § 1.126 Numbering of claims.

The original numbering of the claims must be preserved throughout the prosecution. When claims are canceled the remaining claims must not be renumbered. When claims are added, they must be numbered by the applicant consecutively beginning with the number next following the highest numbered claim previously presented (whether entered or not). When the application is ready for allowance, the examiner, if necessary, will renumber the claims consecutively in the order in which they appear or in such order as may have been requested by applicant.

37 C.F.R. § 1.31 Applicant may be represented by one or more patent practitioners or joint inventors.

An applicant for patent may file and prosecute the applicant's own case, or the applicant may give power of attorney so as to be represented by one or more patent practitioners or joint inventors, except that a juristic entity (e.g., organizational assignee) must be represented by a patent practitioner even if the juristic entity is the applicant. The Office cannot aid in the selection of a patent practitioner.

37 C.F.R. § 1.32 Power of attorney.

(a) Definitions. (1) Patent practitioner means a registered patent attorney or registered patent agent under § 11.6. An attorney or agent registered under § 11.6(d) may only act as a practitioner in design patent applications or other design patent matters or design patent proceedings. (2) Power of attorney means a written document by which a principal authorizes one or more patent practitioners or joint inventors to act on the principal's behalf. (3) Principal means the applicant (§ 1.42) for an application for patent and the patent owner for a patent, including a patent in a supplemental examination or reexamination proceeding. The principal executes a power of attorney designating one or more patent practitioners or joint inventors to act on the principal's behalf. (4) Revocation means the cancellation by the principal of the authority previously given to a patent practitioner or joint inventor to act on the principal's behalf. (5) Customer Number means a number that may be used to: (i) Designate the correspondence address of a patent application or patent such that the correspondence address for the patent application, patent or other patent proceeding would be the address associated with the Customer Number; (ii) Designate the fee address (§ 1.363) of a patent such that the fee address for the patent would be the address associated with the Customer Number; and (iii) Submit a list of patent practitioners such that those patent practitioners associated with the Customer Number would have power of attorney. (6) Patent practitioner of record means a patent practitioner who has been granted a power of attorney in an application, patent, or other proceeding in compliance with paragraph (b) of this section. The phrases practitioner of record and attorney or agent of record also mean a patent practitioner who has been granted a power of attorney in an application, patent, or other proceeding in compliance with paragraph (b) of this section. (b) A power of attorney must: (1) Be in writing; (2) Name one or more representatives in compliance with paragraph (c) of this section; (3) Give the representative power to act on behalf of the principal; and (4) Be signed by the applicant for patent (§ 1.42) or the patent owner. A patent owner who was not the applicant under § 1.46 must appoint any power of attorney in compliance with §§ 3.71 and 3.73 of this chapter. (c) A power of attorney may only name as representative: (1) One or more joint inventors (§ 1.45); (2) Those registered patent practitioners associated with a Customer Number; (3) Ten or fewer patent practitioners, stating the name and registration number of each patent practitioner. Except as provided in paragraph (c)(1) or (c)(2) of this section, the Office will not recognize more than ten patent practitioners as being of record in an application or patent. If a power of attorney names more than ten patent practitioners, such power of attorney must be accompanied by a separate paper indicating which ten patent practitioners named in the power of attorney are to be recognized by the Office as being of record in the application or patent to which the power of attorney is directed. (d) A power of attorney from a prior national application for which benefit is claimed under 35 U.S.C. 120, 121, 365(c), or 386(c) in a continuing application may have effect in the continuing application if a copy of the power of attorney from the prior application is filed in the continuing application unless: (1) The power of attorney was granted by the inventor; and (2) The continuing application names an inventor who was not named as an inventor in the prior application. (e) If the power of attorney was granted by the originally named inventive entity, and an added inventor pursuant to § 1.48 does not provide a power of attorney consistent with the power of attorney granted by the originally named inventive entity, the addition of the inventor results in the loss of that power of attorney upon grant of the § 1.48 request. This provision does not preclude a practitioner from acting pursuant to § 1.34, if applicable.

37 C.F.R. § 1.33 Correspondence respecting patent applications, patent reexamination proceedings, and other proceedings.

(a) Correspondence address and daytime telephone number. When filing an application, a correspondence address must be set forth in either an application data sheet (§ 1.76), or elsewhere, in a clearly identifiable manner, in any paper submitted with an application filing. If no correspondence address is specified, the Office may treat the mailing address of the first named inventor (if provided, see §§ 1.76(b)(1) and 1.63(b)(2)) as the correspondence address. The Office will direct, or otherwise make available, all notices, official letters, and other communications relating to the application to the person associated with the correspondence address. For correspondence submitted via the USPTO patent electronic filing system, however, an electronic acknowledgment receipt will be sent to the submitter. The Office will generally not engage in double correspondence with an applicant and a patent practitioner, or with more than one patent practitioner except as deemed necessary by the Director. If more than one correspondence address is specified, the Office will select one of the specified addresses for use as the correspondence address and, if given, may select the address associated with a Customer Number over a typed correspondence address. For the party to whom correspondence is to be addressed, a daytime telephone number should be supplied in a clearly identifiable manner and may be changed by any party who may change the correspondence address. The correspondence address may be changed by the parties set forth in paragraph (b)(1) or (b)(3) of this section. Prior to the appointment of any power of attorney under § 1.32(b), the correspondence address may also be changed by any patent practitioner named in the application transmittal papers who acts in a representative capacity under the provisions of § 1.34. (b) Amendments and other papers. Amendments and other papers, except for written assertions pursuant to § 1.27(c)(2)(iii) or (c)(2)(iv), filed in the application must be signed by: (1) A patent practitioner of record; (2) A patent practitioner not of record who acts in a representative capacity under the provisions of § 1.34; or (3) The applicant (§ 1.42). Unless otherwise specified, all papers submitted on behalf of a juristic entity must be signed by a patent practitioner. (c) All notices, official letters, and other communications for the patent owner or owners in a reexamination or supplemental examination proceeding will be directed to the correspondence address in the patent file. Amendments filed in a reexamination proceeding, and other papers filed in a reexamination or supplemental examination proceeding, on behalf of the patent owner must be signed by the patent owner, or if there is more than one owner by all the owners, or by an attorney or agent of record in the patent file, or by a registered attorney or agent not of record who acts in a representative capacity under the provisions of § 1.34. Double correspondence with the patent owner or owners and the patent owner's attorney or agent, or with more than one attorney or agent, will not be undertaken. (d) A “correspondence address” or change thereto may be filed with the Patent and Trademark Office during the enforceable life of the patent. The “correspondence address” will be used in any correspondence relating to maintenance fees unless a separate “fee address” has been specified. See § 1.363 for “fee address” used solely for maintenance fee purposes. (e) A change of address filed in a patent application or patent does not change the address for a patent practitioner in the roster of patent attorneys and agents. See § 11.11 of this title. (f) Where application papers from a prior application are used in a continuing application and the correspondence address was changed during the prosecution of the prior application, an application data sheet or separate paper identifying the correspondence address to be used for the continuing application must be submitted. Otherwise, the Office may not recognize the change of correspondence address effected during the prosecution of the prior application. (g) A patent practitioner acting in a representative capacity whose correspondence address is the correspondence address of record in an application may change the correspondence address after the patent has issued, provided that the change of correspondence address is accompanied by a statement that notice has been given to the patentee or owner.

37 C.F.R. § 1.34 Acting in a representative capacity.

When a patent practitioner acting in a representative capacity appears in person or signs a paper in practice before the United States Patent and Trademark Office in a patent case, his or her personal appearance or signature shall constitute a representation to the United States Patent and Trademark Office that under the provisions of this subchapter and the law, he or she is authorized to represent the particular party on whose behalf he or she acts. In filing such a paper, the patent practitioner must set forth his or her registration number, his or her name and signature. Further proof of authority to act in a representative capacity may be required.

37 C.F.R. § 1.36 Revocation of power of attorney; withdrawal of patent attorney or agent.

(a) A power of attorney, pursuant to § 1.32(b), may be revoked at any stage in the proceedings of a case by the applicant or patent owner. A power of attorney to the patent practitioners associated with a Customer Number will be treated as a request to revoke any powers of attorney previously given. Fewer than all of the applicants (or fewer than all patent owners in a supplemental examination or reexamination proceeding) may revoke the power of attorney only upon a showing of sufficient cause, and payment of the petition fee set forth in § 1.17(f). A patent practitioner will be notified of the revocation of the power of attorney. Where power of attorney is given to the patent practitioners associated with a Customer Number (§ 1.32(c)(2)), the practitioners so appointed will also be notified of the revocation of the power of attorney when the power of attorney to all of the practitioners associated with the Customer Number is revoked. The notice of revocation will be mailed to the correspondence address for the application (§ 1.33) in effect before the revocation. An assignment will not of itself operate as a revocation of a power previously given, but the assignee may become the applicant under § 1.46(c) and revoke any previous power of attorney and grant a power of attorney as provided in § 1.32(b). (b) A registered patent attorney or patent agent who has been given a power of attorney pursuant to § 1.32(b) may withdraw as attorney or agent of record upon application to and approval by the Director. The applicant or patent owner will be notified of the withdrawal of the registered patent attorney or patent agent. Where power of attorney is given to the patent practitioners associated with a Customer Number, a request to delete all of the patent practitioners associated with the Customer Number may not be granted if an applicant has given power of attorney to the patent practitioners associated with the Customer Number in an application that has an Office action to which a reply is due, but insufficient time remains for the applicant to file a reply. See § 41.5 of this title for withdrawal during proceedings before the Patent Trial and Appeal Board.

37 C.F.R. § 1.181 Petition to the Director.

(a) Petition may be taken to the Director: (1) From any action or requirement of any examiner in the ex parte prosecution of an application, or in ex parte or inter partes prosecution of a reexamination proceeding which is not subject to appeal to the Patent Trial and Appeal Board or to the court; (2) In cases in which a statute or the rules specify that the matter is to be determined directly by or reviewed by the Director; and (3) To invoke the supervisory authority of the Director in appropriate circumstances. For petitions involving action of the Patent Trial and Appeal Board, see § 41.3 of this title. (b) Any such petition must contain a statement of the facts involved and the point or points to be reviewed and the action requested. Briefs or memoranda, if any, in support thereof should accompany or be embodied in the petition; and where facts are to be proven, the proof in the form of affidavits or declarations (and exhibits, if any) must accompany the petition. (c) When a petition is taken from an action or requirement of an examiner in the ex parte prosecution of an application, or in the ex parte or inter partes prosecution of a reexamination proceeding, it may be required that there have been a proper request for reconsideration (§ 1.111) and a repeated action by the examiner. The examiner may be directed by the Director to furnish a written statement, within a specified time, setting forth the reasons for his or her decision upon the matters averred in the petition, supplying a copy to the petitioner. (d) Where a fee is required for a petition to the Director the appropriate section of this part will so indicate. If any required fee does not accompany the petition, the petition will be dismissed. (e) Oral hearing will not be granted except when considered necessary by the Director. (f) The mere filing of a petition will not stay any period for reply that may be running against the application, nor act as a stay of other proceedings. Any petition under this part not filed within two months of the mailing date of the action or notice from which relief is requested may be dismissed as untimely, except as otherwise provided. This two-month period is not extendable. (g) The Director may delegate to appropriate Patent and Trademark Office officials the determination of petitions.

37 C.F.R. § 1.182 Questions not specifically provided for.

All situations not specifically provided for in the regulations of this part will be decided in accordance with the merits of each situation by or under the authority of the Director, subject to such other requirements as may be imposed, and such decision will be communicated to the interested parties in writing. Any petition seeking a decision under this section must be accompanied by the petition fee set forth in § 1.17(f).

37 C.F.R. § 1.183 Suspension of rules.

In an extraordinary situation, when justice requires, any requirement of the regulations in this part which is not a requirement of the statutes may be suspended or waived by the Director or the Director's designee, sua sponte, or on petition of the interested party, subject to such other requirements as may be imposed. Any petition under this section must be accompanied by the petition fee set forth in § 1.17(f).

37 C.F.R. § 1.129 Transitional procedures for limited examination after final rejection and restriction practice.

(a) An applicant in an application, other than for reissue or a design patent, that has been pending for at least two years as of June 8, 1995, taking into account any reference made in such application to any earlier filed application under 35 U.S.C. 120, 121 and 365(c), is entitled to have a first submission entered and considered on the merits after final rejection under the following circumstances: The Office will consider such a submission, if the first submission and the fee set forth in § 1.17(r) are filed prior to the filing of an appeal brief and prior to abandonment of the application. The finality of the final rejection is automatically withdrawn upon the timely filing of the submission and payment of the fee set forth in § 1.17(r). If a subsequent final rejection is made in the application, applicant is entitled to have a second submission entered and considered on the merits after the subsequent final rejection under the following circumstances: The Office will consider such a submission, if the second submission and a second fee set forth in § 1.17(r) are filed prior to the filing of an appeal brief and prior to abandonment of the application. The finality of the subsequent final rejection is automatically withdrawn upon the timely filing of the submission and payment of the second fee set forth in § 1.17(r). Any submission filed after a final rejection made in an application subsequent to the fee set forth in § 1.17(r) having been twice paid will be treated as set forth in § 1.116. A submission as used in this paragraph includes, but is not limited to, an information disclosure statement, an amendment to the written description, claims or drawings and a new substantive argument or new evidence in support of patentability. (b)(1) In an application, other than for reissue or a design patent, that has been pending for at least three years as of June 8, 1995; taking into account any reference made in the application to any earlier filed application under 35 U.S.C. 120, 121, and 365(c), no requirement for restriction or for the filing of divisional applications shall be made or maintained in the application after June 8, 1995, except where: (i) The requirement was first made in the application or any earlier filed application under 35 U.S.C. 120, 121 and 365(c) prior to April 8, 1995; (ii) The examiner has not made a requirement for restriction in the present or parent application prior to April 8, 1995, due to actions by the applicant; or (iii) The required fee for examination of each additional invention was not paid. (2) If the application contains more than one independent and distinct invention and a requirement for restriction or for the filing of divisional applications cannot be made or maintained pursuant to this paragraph, applicant will be so notified and given a time period to: (i) Elect the invention or inventions to be searched and examined, if no election has been made prior to the notice, and pay the fee set forth in § 1.17(s) for each independent and distinct invention claimed in the application in excess of one which applicant elects; (ii) Confirm an election made prior to the notice and pay the fee set forth in § 1.17(s) for each independent and distinct invention claimed in the application in addition to the one invention which applicant previously elected; or (iii) File a petition under this section traversing the requirement. If the required petition is filed in a timely manner, the original time period for electing and paying the fee set forth in § 1.17(s) will be deferred and any decision on the petition affirming or modifying the requirement will set a new time period to elect the invention or inventions to be searched and examined and to pay the fee set forth in § 1.17(s) for each independent and distinct invention claimed in the application in excess of one which applicant elects. (3) The additional inventions for which the required fee has not been paid will be withdrawn from consideration under § 1.142(b). An applicant who desires examination of an invention so withdrawn from consideration can file a divisional application under 35 U.S.C. 121. (c) The provisions of this section shall not be applicable to any application filed after June 8, 1995.

37 C.F.R. § 1.133 Interviews.

(a)(1) Interviews with examiners concerning applications and other matters pending before the Office must be conducted on Office premises and within Office hours, as the respective examiners may designate. Interviews will not be permitted at any other time or place without the authority of the Director. (2) An interview for the discussion of the patentability of a pending application will not occur before the first Office action, unless the application is a continuing or substitute application or the examiner determines that such an interview would advance prosecution of the application. (3) The examiner may require that an interview be scheduled in advance. (b) In every instance where reconsideration is requested in view of an interview with an examiner, a complete written statement of the reasons presented at the interview as warranting favorable action must be filed by the applicant. An interview does not remove the necessity for reply to Office actions as specified in §§ 1.111 and 1.135.

37 C.F.R. § 1.134 Time period for reply to an Office action.

An Office action will notify the applicant of any non-statutory or shortened statutory time period set for reply to an Office action. Unless the applicant is notified in writing that a reply is required in less than six months, a maximum period of six months is allowed.

37 C.F.R. § 1.135 Abandonment for failure to reply within time period.

(a) If an applicant of a patent application fails to reply within the time period provided under § 1.134 and § 1.136, the application will become abandoned unless an Office action indicates otherwise. (b) Prosecution of an application to save it from abandonment pursuant to paragraph (a) of this section must include such complete and proper reply as the condition of the application may require. The admission of, or refusal to admit, any amendment after final rejection or any amendment not responsive to the last action, or any related proceedings, will not operate to save the application from abandonment. (c) When reply by the applicant is a bona fide attempt to advance the application to final action, and is substantially a complete reply to the non-final Office action, but consideration of some matter or compliance with some requirement has been inadvertently omitted, applicant may be given a new time period for reply under § 1.134 to supply the omission.

37 C.F.R. § 1.136 Extensions of time.

(a)(1) If an applicant is required to reply within a nonstatutory or shortened statutory time period, applicant may extend the time period for reply up to the earlier of the expiration of any maximum period set by statute or five months after the time period set for reply, if a petition for an extension of time and the fee set in § 1.17(a) are filed, unless: (i) Applicant is notified otherwise in an Office action; (ii) The reply is a reply brief submitted pursuant to § 41.41 of this title; (iii) The reply is a request for an oral hearing submitted pursuant to § 41.47(a) of this title; (iv) The reply is to a decision by the Patent Trial and Appeal Board pursuant to § 41.50 or § 41.52 of this chapter or to § 90.3 of this chapter; or (v) The application is involved in a contested case (§ 41.101(a) of this title) or a derivation proceeding (§ 42.4(b) of this title). (2) The date on which the petition and the fee have been filed is the date for purposes of determining the period of extension and the corresponding amount of the fee. The expiration of the time period is determined by the amount of the fee paid. A reply must be filed prior to the expiration of the period of extension to avoid abandonment of the application (§ 1.135), but in no situation may an applicant reply later than the maximum time period set by statute, or be granted an extension of time under paragraph (b) of this section when the provisions of paragraph (a) of this section are available. (3) A written request may be submitted in an application that is an authorization to treat any concurrent or future reply, requiring a petition for an extension of time under this paragraph for its timely submission, as incorporating a petition for extension of time for the appropriate length of time. An authorization to charge all required fees, fees under § 1.17, or all required extension of time fees will be treated as a constructive petition for an extension of time in any concurrent or future reply requiring a petition for an extension of time under this paragraph for its timely submission. Submission of the fee set forth in § 1.17(a) will also be treated as a constructive petition for an extension of time in any concurrent reply requiring a petition for an extension of time under this paragraph for its timely submission. (b) When a reply cannot be filed within the time period set for such reply and the provisions of paragraph (a) of this section are not available, the period for reply will be extended only for sufficient cause and for a reasonable time specified. Any request for an extension of time under this paragraph must be filed on or before the day on which such reply is due, but the mere filing of such a request will not effect any extension under this paragraph. In no situation can any extension carry the date on which reply is due beyond the maximum time period set by statute. Any request under this paragraph must be accompanied by the petition fee set forth in § 1.17(g). (c) If an applicant is notified in a “Notice of Allowability” that an application is otherwise in condition for allowance, the following time periods are not extendable if set in the “Notice of Allowability” or in an Office action having a mail date on or after the mail date of the “Notice of Allowability”: (1) The period for submitting the inventor's oath or declaration; (2) The period for submitting formal drawings set under § 1.85(c); and (3) The period for making a deposit set under § 1.809(c). (d) See § 1.550(c) for extensions of time in ex parte reexamination proceedings, § 1.956 for extensions of time in inter partes reexamination proceedings; §§ 41.4(a) and 41.121(a)(3) of this chapter for extensions of time in contested cases before the Patent Trial and Appeal Board; § 42.5(c) of this chapter for extensions of time in trials before the Patent Trial and Appeal Board; and § 90.3 of this chapter for extensions of time to appeal to the U.S. Court of Appeals for the Federal Circuit or to commence a civil action.

37 C.F.R. § 1.137 Revival of abandoned application, or terminated or limited reexamination prosecution.

(a) Revival on the basis of unintentional delay. If the delay in reply by applicant or patent owner was unintentional, a petition may be filed pursuant to this section to revive an abandoned application or a reexamination prosecution terminated under § 1.550(d) or § 1.957(b) or limited under § 1.957(c). (b) Petition requirements. A grantable petition pursuant to this section must be accompanied by: (1) The reply required to the outstanding Office action or notice, unless previously filed; (2) The petition fee as set forth in § 1.17(m); (3) Any terminal disclaimer (and fee as set forth in § 1.20(d)) required pursuant to paragraph (d) of this section; and (4) A statement that the entire delay in filing the required reply from the due date for the reply until the filing of a grantable petition pursuant to this section was unintentional. The Director may require additional information where there is a question whether the delay was unintentional. (c) Reply. In an application abandoned under § 1.57(a), the reply must include a copy of the specification and any drawings of the previously filed application. In an application or patent abandoned for failure to pay the issue fee or any portion thereof, the required reply must include payment of the issue fee or any outstanding balance. In an application abandoned for failure to pay the publication fee, the required reply must include payment of the publication fee. In a nonprovisional application abandoned for failure to prosecute, the required reply may be met by the filing of a continuing application. In a nonprovisional utility or plant application filed on or after June 8, 1995, abandoned after the close of prosecution as defined in § 1.114(b), the required reply may also be met by the filing of a request for continued examination in compliance with § 1.114. (d) Terminal disclaimer. (1) Any petition to revive pursuant to this section in a design application must be accompanied by a terminal disclaimer and fee as set forth in § 1.321 dedicating to the public a terminal part of the term of any patent granted thereon equivalent to the period of abandonment of the application. Any petition to revive pursuant to this section in either a utility or plant application filed before June 8, 1995, must be accompanied by a terminal disclaimer and fee as set forth in § 1.321 dedicating to the public a terminal part of the term of any patent granted thereon equivalent to the lesser of: (i) The period of abandonment of the application; or (ii) The period extending beyond twenty years from the date on which the application for the patent was filed in the United States or, if the application contains a specific reference to an earlier filed application(s) under 35 U.S.C. 120, 121, 365(c), or 386(c) from the date on which the earliest such application was filed. (2) Any terminal disclaimer pursuant to paragraph (d)(1) of this section must also apply to any patent granted on a continuing utility or plant application filed before June 8, 1995, or a continuing design application, that contains a specific reference under 35 U.S.C. 120, 121, 365(c), or 386(c) to the application for which revival is sought. (3) The provisions of paragraph (d)(1) of this section do not apply to applications for which revival is sought solely for purposes of copendency with a utility or plant application filed on or after June 8, 1995, to reissue applications, or to reexamination proceedings. (e) Request for reconsideration. Any request for reconsideration or review of a decision refusing to revive an abandoned application, or a terminated or limited reexamination prosecution, upon petition filed pursuant to this section, to be considered timely, must be filed within two months of the decision refusing to revive or within such time as set in the decision. Unless a decision indicates otherwise, this time period may be extended under: (1) The provisions of § 1.136 for an abandoned application; (2) The provisions of § 1.550(c) for a terminated ex parte reexamination prosecution, where the ex parte reexamination was filed under § 1.510; or (3) The provisions of § 1.956 for a terminated inter partes reexamination prosecution or an inter partes reexamination limited as to further prosecution, where the inter partes reexamination was filed under § 1.913. (f) Abandonment for failure to notify the Office of a foreign filing. A nonprovisional application abandoned pursuant to 35 U.S.C. 122(b)(2)(B)(iii) for failure to timely notify the Office of the filing of an application in a foreign country or under a multinational treaty that requires publication of applications eighteen months after filing, may be revived pursuant to this section. The reply requirement of paragraph (c) of this section is met by the notification of such filing in a foreign country or under a multinational treaty, but the filing of a petition under this section will not operate to stay any period for reply that may be running against the application. (g) Provisional applications. A provisional application, abandoned for failure to timely respond to an Office requirement, may be revived pursuant to this section. Subject to the provisions of 35 U.S.C. 119(e)(3) and § 1.7(b), a provisional application will not be regarded as pending after twelve months from its filing date under any circumstances.

37 C.F.R. § 1.138 Express abandonment.

(a) An application may be expressly abandoned by filing a written declaration of abandonment identifying the application in the United States Patent and Trademark Office. Express abandonment of the application may not be recognized by the Office before the date of issue or publication unless it is actually received by appropriate officials in time to act. (b) A written declaration of abandonment must be signed by a party authorized under § 1.33(b)(1) or (b)(3) to sign a paper in the application, except as otherwise provided in this paragraph. A registered attorney or agent, not of record, who acts in a representative capacity under the provisions of § 1.34 when filing a continuing application, may expressly abandon the prior application as of the filing date granted to the continuing application. (c) An applicant seeking to abandon an application to avoid publication of the application (see § 1.211(a)(1)) must submit a declaration of express abandonment by way of a petition under this paragraph including the fee set forth in § 1.17(h) in sufficient time to permit the appropriate officials to recognize the abandonment and remove the application from the publication process. Applicants should expect that the petition will not be granted and the application will be published in regular course unless such declaration of express abandonment and petition are received by the appropriate officials more than four weeks prior to the projected date of publication. (d) An applicant seeking to abandon an application filed under 35 U.S.C. 111(a) and § 1.53(b) on or after December 8, 2004, to obtain a refund of the search fee and excess claims fee paid in the application, must submit a declaration of express abandonment by way of a petition under this paragraph before an examination has been made of the application. The date indicated on any certificate of mailing or transmission under § 1.8 will not be taken into account in determining whether a petition under § 1.138(d) was filed before an examination has been made of the application. If a request for refund of the search fee and excess claims fee paid in the application is not filed with the declaration of express abandonment under this paragraph or within two months from the date on which the declaration of express abandonment under this paragraph was filed, the Office may retain the entire search fee and excess claims fee paid in the application. This two-month period is not extendable. If a petition and declaration of express abandonment under this paragraph are not filed before an examination has been made of the application, the Office will not refund any part of the search fee and excess claims fee paid in the application except as provided in § 1.26.

37 C.F.R. § 1.321 Statutory disclaimers, including terminal disclaimers.

(a) A patentee owning the whole or any sectional interest in a patent may disclaim any complete claim or claims in a patent. In like manner any patentee may disclaim or dedicate to the public the entire term, or any terminal part of the term, of the patent granted. Such disclaimer is binding upon the grantee and its successors or assigns. A notice of the disclaimer is published in the Official Gazette and attached to the printed copies of the specification. The disclaimer, to be recorded in the Patent and Trademark Office, must: (1) Be signed by the patentee, or an attorney or agent of record; (2) Identify the patent and complete claim or claims, or term being disclaimed. A disclaimer which is not a disclaimer of a complete claim or claims, or term will be refused recordation; (3) State the present extent of patentee's ownership interest in the patent; and (4) Be accompanied by the fee set forth in § 1.20(d). (b) An applicant may disclaim or dedicate to the public the entire term, or any terminal part of the term, of a patent to be granted. Such terminal disclaimer is binding upon the grantee and its successors or assigns. The terminal disclaimer, to be recorded in the Patent and Trademark Office, must: (1) Be signed by the applicant or an attorney or agent of record; (2) Specify the portion of the term of the patent being disclaimed; (3) State the present extent of applicant's ownership interest in the patent to be granted; and (4) Be accompanied by the fee set forth in § 1.20(d). (c) A terminal disclaimer, when filed to obviate judicially created double patenting in a patent application or in a reexamination proceeding except as provided for in paragraph (d) of this section, must: (1) Comply with the provisions of paragraphs (b)(2) through (b)(4) of this section; (2) Be signed in accordance with paragraph (b)(1) of this section if filed in a patent application or in accordance with paragraph (a)(1) of this section if filed in a reexamination proceeding; and (3) Include a provision that any patent granted on that application or any patent subject to the reexamination proceeding shall be enforceable only for and during such period that said patent is commonly owned with the application or patent which formed the basis for the judicially created double patenting. (d) A terminal disclaimer, when filed in a patent application or in a reexamination proceeding to obviate double patenting based upon a patent or application that is not commonly owned but was disqualified as prior art as set forth in either § 1.104(c)(4)(ii) or (c)(5)(ii) as the result of activities undertaken within the scope of a joint research agreement, must: (1) Comply with the provisions of paragraphs (b)(2) through (b)(4) of this section; (2) Be signed in accordance with paragraph (b)(1) of this section if filed in a patent application or be signed in accordance with paragraph (a)(1) of this section if filed in a reexamination proceeding; and (3) Include a provision waiving the right to separately enforce any patent granted on that application or any patent subject to the reexamination proceeding and the patent or any patent granted on the application which formed the basis for the double patenting, and that any patent granted on that application or any patent subject to the reexamination proceeding shall be enforceable only for and during such period that said patent and the patent, or any patent granted on the application, which formed the basis for the double patenting are not separately enforced.

37 C.F.R. § 1.362 Time for payment of maintenance fees.

(a) Maintenance fees as set forth in §§ 1.20 (e) through (g) are required to be paid in all patents based on applications filed on or after December 12, 1980, except as noted in paragraph (b) of this section, to maintain a patent in force beyond 4, 8 and 12 years after the date of grant. (b) Maintenance fees are not required for any plant patents or for any design patents. (c) The application filing dates for purposes of payment of maintenance fees are as follows: (1) For an application not claiming benefit of an earlier application, the actual United States filing date of the application. (2) For an application claiming benefit of an earlier foreign application under 35 U.S.C. 119, the United States filing date of the application. (3) For a continuing (continuation, division, continuation-in-part) application claiming the benefit of a prior patent application under 35 U.S.C. 120, the actual United States filing date of the continuing application. (4) For a reissue application, including a continuing reissue application claiming the benefit of a reissue application under 35 U.S.C. 120, United States filing date of the original non-reissue application on which the patent reissued is based. (5) For an international application which has entered the United States as a Designated Office under 35 U.S.C. 371, the international filing date granted under Article 11(1) of the Patent Cooperation Treaty which is considered to be the United States filing date under 35 U.S.C. 363. (d) Maintenance fees may be paid in patents without surcharge during the periods extending respectively from: (1) 3 years through 3 years and 6 months after grant for the first maintenance fee, (2) 7 years through 7 years and 6 months after grant for the second maintenance fee, and (3) 11 years through 11 years and 6 months after grant for the third maintenance fee. (e) Maintenance fees may be paid with the surcharge set forth in § 1.20(h) during the respective grace periods after: (1) 3 years and 6 months and through the day of the 4th anniversary of the grant for the first maintenance fee. (2) 7 years and 6 months and through the day of the 8th anniversary of the grant for the second maintenance fee, and (3) 11 years and 6 months and through the day of the 12th anniversary of the grant for the third maintenance fee. (f) If the last day for paying a maintenance fee without surcharge set forth in paragraph (d) of this section, or the last day for paying a maintenance fee with surcharge set forth in paragraph (e) of this section, falls on a Saturday, Sunday, or a federal holiday within the District of Columbia, the maintenance fee and any necessary surcharge may be paid under paragraph (d) or paragraph (e) respectively on the next succeeding day which is not a Saturday, Sunday, or federal holiday. (g) Unless the maintenance fee and any applicable surcharge is paid within the time periods set forth in paragraphs (d), (e) or (f) of this section, the patent will expire as of the end of the grace period set forth in paragraph (e) of this section. A patent which expires for the failure to pay the maintenance fee will expire at the end of the same date (anniversary date) the patent was granted in the 4th, 8th, or 12th year after grant. (h) The periods specified in §§ 1.362 (d) and (e) with respect to a reissue application, including a continuing reissue application thereof, are counted from the date of grant of the original non-reissue application on which the reissued patent is based.

37 C.F.R. § 1.363 Fee address for maintenance fee purposes.

(a) All notices, receipts, refunds, and other communications relating to payment or refund of maintenance fees will be directed to the correspondence address used during prosecution of the application as indicated in § 1.33(a) unless: (1) A fee address for purposes of payment of maintenance fees is set forth when submitting the issue fee, or (2) A change in the correspondence address for all purposes is filed after payment of the issue fee, or (3) A fee address or a change in the “fee address” is filed for purposes of receiving notices, receipts and other correspondence relating to the payment of maintenance fees after the payment of the issue fee, in which instance, the latest such address will be used. (b) An assignment of a patent application or patent does not result in a change of the “correspondence address” or “fee address” for maintenance fee purposes. (c) A fee address must be an address associated with a Customer Number.

37 C.F.R. § 1.366 Submission of maintenance fees.

(a) The patentee may pay maintenance fees and any necessary surcharges, or any person or organization may pay maintenance fees and any necessary surcharges on behalf of a patentee. A maintenance fee transmittal letter may be signed by a juristic applicant or patent owner. A patentee need not file authorization to enable any person or organization to pay maintenance fees and any necessary surcharges on behalf of the patentee. (b) A maintenance fee and any necessary surcharge submitted for a patent must be submitted in the amount due on the date the maintenance fee and any necessary surcharge are paid. A maintenance fee or surcharge may be paid in the manner set forth in § 1.23 or by an authorization to charge a deposit account established pursuant to § 1.25. Payment of a maintenance fee and any necessary surcharge or the authorization to charge a deposit account must be submitted within the periods set forth in § 1.362 (d), (e), or (f). Any payment or authorization of maintenance fees and surcharges filed at any other time will not be accepted and will not serve as a payment of the maintenance fee except insofar as a delayed payment of the maintenance fee is accepted by the Director in an expired patent pursuant to a petition filed under § 1.378. Any authorization to charge a deposit account must authorize the immediate charging of the maintenance fee and any necessary surcharge to the deposit account. Payment of less than the required amount, payment in a manner other than that set forth in § 1.23, or in the filing of an authorization to charge a deposit account having insufficient funds will not constitute payment of a maintenance fee or surcharge on a patent. The procedures set forth in § 1.8 or § 1.10 may be utilized in paying maintenance fees and any necessary surcharges. (c) In submitting maintenance fees and any necessary surcharges, identification of the patents for which maintenance fees are being paid must include the patent number, and the application number of the United States application for the patent on which the maintenance fee is being paid. If the payment includes identification of only the patent number (i.e., does not identify the application number of the United States application for the patent on which the maintenance fee is being paid), the Office may apply the payment to the patent identified by patent number in the payment or may return the payment. (d) Payment of maintenance fees and any surcharges should identify the fee being paid for each patent as to whether it is the 3 1/2-, 7 1/2-, or 11 1/2-year fee, whether small entity status is being changed or claimed, the amount of the maintenance fee and any surcharge being paid, and any assigned customer number. If the maintenance fee and any necessary surcharge is being paid on a reissue patent, the payment must identify the reissue patent by reissue patent number and reissue application number as required by paragraph (c) of this section and should also include the original patent number. (e) Maintenance fee payments and surcharge payments relating thereto must be submitted separate from any other payments for fees or charges, whether submitted in the manner set forth in § 1.23 or by an authorization to charge a deposit account. If maintenance fee and surcharge payments for more than one patent are submitted together, they should be submitted on as few sheets as possible with the patent numbers listed in increasing patent number order. If the payment submitted is insufficient to cover the maintenance fees and surcharges for all the listed patents, the payment will be applied in the order the patents are listed, beginning at the top of the listing. (f) Notification of any change in status resulting in loss of entitlement to small entity status must be filed in a patent prior to paying, or at the time of paying, the earliest maintenance fee due after the date on which status as a small entity is no longer appropriate. See § 1.27(g). (g) Maintenance fees and surcharges relating thereto will not be refunded except in accordance with §§ 1.26 and 1.28(a).

37 C.F.R. § 1.377 Review of decision refusing to accept and record payment of a maintenance fee filed prior to expiration of patent.

(a) Any patentee who is dissatisfied with the refusal of the Patent and Trademark Office to accept and record a maintenance fee which was filed prior to the expiration of the patent may petition the Director to accept and record the maintenance fee. (b) Any petition under this section must be filed within two months of the action complained of, or within such other time as may be set in the action complained of, and must be accompanied by the fee set forth in § 1.17(g). The petition may include a request that the petition fee be refunded if the refusal to accept and record the maintenance fee is determined to result from an error by the Patent and Trademark Office. (c) Any petition filed under this section must comply with the requirements of § 1.181(b) and must be signed by an attorney or agent registered to practice before the Patent and Trademark Office, or by the patentee, the assignee, or other party in interest.

37 C.F.R. § 1.378 Acceptance of delayed payment of maintenance fee in expired patent to reinstate patent.

(a) The Director may accept the payment of any maintenance fee due on a patent after expiration of the patent if, upon petition, the delay in payment of the maintenance fee is shown to the satisfaction of the Director to have been unintentional. If the Director accepts payment of the maintenance fee upon petition, the patent shall be considered as not having expired, but will be subject to the conditions set forth in 35 U.S.C. 41(c)(2). (b) Any petition to accept an unintentionally delayed payment of a maintenance fee must include: (1) The required maintenance fee set forth in § 1.20(e) through (g); (2) The petition fee as set forth in § 1.17(m); and (3) A statement that the delay in payment of the maintenance fee was unintentional. The Director may require additional information where there is a question whether the delay was unintentional. (c) Any petition under this section must be signed in compliance with § 1.33(b). (d) Reconsideration of a decision refusing to accept a delayed maintenance fee may be obtained by filing a petition for reconsideration within two months of the decision, or such other time as set in the decision refusing to accept the delayed payment of the maintenance fee. (e) If the delayed payment of the maintenance fee is not accepted, the maintenance fee will be refunded following the decision on the petition for reconsideration, or after the expiration of the time for filing such a petition for reconsideration, if none is filed.

37 C.F.R. § 1.141 Different inventions in one national application.

(a) Two or more independent and distinct inventions may not be claimed in one national application, except that more than one species of an invention, not to exceed a reasonable number, may be specifically claimed in different claims in one national application, provided the application also includes an allowable claim generic to all the claimed species and all the claims to species in excess of one are written in dependent form (§ 1.75) or otherwise include all the limitations of the generic claim. (b) Where claims to all three categories, product, process of making, and process of use, are included in a national application, a three way requirement for restriction can only be made where the process of making is distinct from the product. If the process of making and the product are not distinct, the process of using may be joined with the claims directed to the product and the process of making the product even though a showing of distinctness between the product and process of using the product can be made.

37 C.F.R. § 1.142 Requirement for restriction.

(a) If two or more independent and distinct inventions are claimed in a single application, the examiner in an Office action will require the applicant in the reply to that action to elect an invention to which the claims will be restricted, this official action being called a requirement for restriction (also known as a requirement for division). Such requirement will normally be made before any action on the merits; however, it may be made at any time before final action. (b) Claims to the invention or inventions not elected, if not canceled, are nevertheless withdrawn from further consideration by the examiner by the election, subject however to reinstatement in the event the requirement for restriction is withdrawn or overruled.

37 C.F.R. § 1.143 Reconsideration of requirement.

If the applicant disagrees with the requirement for restriction, he may request reconsideration and withdrawal or modification of the requirement, giving the reasons therefor. (See § 1.111.) In requesting reconsideration the applicant must indicate a provisional election of one invention for prosecution, which invention shall be the one elected in the event the requirement becomes final The requirement for restriction will be reconsidered on such a request. If the requirement is repeated and made final the examiner will at the same time act on the claims to the invention elected.

37 C.F.R. § 1.144 Petition from requirement for restriction.

After a final requirement for restriction, the applicant, in addition to making any reply due on the remainder of the action, may petition the Director to review the requirement. Petition may be deferred until after final action on or allowance of claims to the invention elected, but must be filed not later than appeal. A petition will not be considered if reconsideration of the requirement was not requested (see § 1.181).

37 C.F.R. § 1.145 Subsequent presentation of claims for different invention.

If, after an Office action on an application, the applicant presents claims directed to an invention distinct from and independent of the invention previously claimed, the applicant will be required to restrict the claims to the invention previously claimed if the amendment is entered, subject to reconsideration and review as provided in §§ 1.143 and 1.144.

37 C.F.R. § 1.146 Election of species.

In the first action on an application containing a generic claim to a generic invention (genus) and claims to more than one patentably distinct species embraced thereby, the examiner may require the applicant in the reply to that action to elect a species of his or her invention to which his or her claim will be restricted if no claim to the genus is found to be allowable. However, if such application contains claims directed to more than a reasonable number of species, the examiner may require restriction of the claims to not more than a reasonable number of species before taking further action in the application.

37 C.F.R. § 1.97 Filing of information disclosure statement.

(a) In order for an applicant for a patent or for a reissue of a patent to have an information disclosure statement in compliance with § 1.98 considered by the Office during the pendency of the application, the information disclosure statement must satisfy one of paragraphs (b), (c), or (d) of this section. (b) An information disclosure statement shall be considered by the Office if filed by the applicant within any one of the following time periods: (1) Within three months of the filing date of a national application other than a continued prosecution application under § 1.53(d); (2) Within three months of the date of entry of the national stage as set forth in § 1.491 in an international application; (3) Before the mailing of a first Office action on the merits; (4) Before the mailing of a first Office action after the filing of a request for continued examination under § 1.114; or (5) Within three months of the date of publication of the international registration under Hague Agreement Article 10(3) in an international design application. (c) An information disclosure statement shall be considered by the Office if filed after the period specified in paragraph (b) of this section, provided that the information disclosure statement is filed before the mailing date of any of a final action under § 1.113, a notice of allowance under § 1.311, or an action that otherwise closes prosecution in the application, and it is accompanied by one of: (1) The statement specified in paragraph (e) of this section; or (2) The fee set forth in § 1.17(p). (d) An information disclosure statement shall be considered by the Office if filed by the applicant after the period specified in paragraph (c) of this section, provided that the information disclosure statement is filed on or before payment of the issue fee and is accompanied by: (1) The statement specified in paragraph (e) of this section; and (2) The fee set forth in § 1.17(p). (e) A statement under this section must state either: (1) That each item of information contained in the information disclosure statement was first cited in any communication from a foreign patent office in a counterpart foreign application not more than three months prior to the filing of the information disclosure statement; or (2) That no item of information contained in the information disclosure statement was cited in a communication from a foreign patent office in a counterpart foreign application, and, to the knowledge of the person signing the certification after making reasonable inquiry, no item of information contained in the information disclosure statement was known to any individual designated in § 1.56(c) more than three months prior to the filing of the information disclosure statement. (f) No extensions of time for filing an information disclosure statement are permitted under § 1.136. If a bona fide attempt is made to comply with § 1.98, but part of the required content is inadvertently omitted, additional time may be given to enable full compliance. (g) An information disclosure statement filed in accordance with this section shall not be construed as a representation that a search has been made. (h) The filing of an information disclosure statement shall not be construed to be an admission that the information cited in the statement is, or is considered to be, material to patentability as defined in § 1.56(b). (i) If an information disclosure statement does not comply with either this section or § 1.98, it will be placed in the file but will not be considered by the Office.

37 C.F.R. § 1.98 Content of information disclosure statement.

(a) Any information disclosure statement filed under § 1.97 shall include the items listed in paragraphs (a)(1), (a)(2) and (a)(3) of this section. (1) A list of all patents, publications, applications, or other information submitted for consideration by the Office. U.S. patents and U.S. patent application publications must be listed in a section separately from citations of other documents. Each page of the list must include: (i) The application number of the application in which the information disclosure statement is being submitted; (ii) A column that provides a space, next to each document to be considered, for the examiner's initials; and (iii) A heading that clearly indicates that the list is an information disclosure statement. (2) A legible copy of: (i) Each foreign patent; (ii) Each publication or that portion which caused it to be listed, other than U.S. patents and U.S. patent application publications unless required by the Office; (iii) For each cited pending unpublished U.S. application, the application specification including the claims, and any drawing of the application, or that portion of the application which caused it to be listed including any claims directed to that portion; and (iv) All other information or that portion which caused it to be listed. (3)(i) A concise explanation of the relevance, as it is presently understood by the individual designated in § 1.56(c) most knowledgeable about the content of the information, of each patent, publication, or other information listed that is not in the English language. The concise explanation may be either separate from applicant's specification or incorporated therein. (ii) A copy of the translation if a written English-language translation of a non-English-language document, or portion thereof, is within the possession, custody, or control of, or is readily available to any individual designated in § 1.56(c). (b)(1) Each U.S. patent listed in an information disclosure statement must be identified by inventor, patent number, and issue date. (2) Each U.S. patent application publication listed in an information disclosure statement shall be identified by applicant, patent application publication number, and publication date. (3) Each U.S. application listed in an information disclosure statement must be identified by the inventor, application number, and filing date. (4) Each foreign patent or published foreign patent application listed in an information disclosure statement must be identified by the country or patent office which issued the patent or published the application, an appropriate document number, and the publication date indicated on the patent or published application. (5) Each publication listed in an information disclosure statement must be identified by publisher, author (if any), title, relevant pages of the publication, date, and place of publication. (c) When the disclosures of two or more patents or publications listed in an information disclosure statement are substantively cumulative, a copy of one of the patents or publications as specified in paragraph (a) of this section may be submitted without copies of the other patents or publications, provided that it is stated that these other patents or publications are cumulative. (d) A copy of any patent, publication, pending U.S. application or other information, as specified in paragraph (a) of this section, listed in an information disclosure statement is required to be provided, even if the patent, publication, pending U.S. application or other information was previously submitted to, or cited by, the Office in an earlier application, unless: (1) The earlier application is properly identified in the information disclosure statement and is relied on for an earlier effective filing date under 35 U.S.C. 120; and (2) The information disclosure statement submitted in the earlier application complies with paragraphs (a) through (c) of this section.

37 C.F.R. § 1.41 Inventorship.

(a) An application must include, or be amended to include, the name of the inventor for any invention claimed in the application. (b) The inventorship of a nonprovisional application under 35 U.S.C. 111(a) is the inventor or joint inventors set forth in the application data sheet in accordance with § 1.76 filed before or concurrently with the inventor's oath or declaration. If an application data sheet is not filed before or concurrently with the inventor's oath or declaration, the inventorship is the inventor or joint inventors set forth in the inventor's oath or declaration, except as provided for in §§ 1.53(d)(4) and 1.63(d). Once an application data sheet or the inventor's oath or declaration is filed in a nonprovisional application, any correction of inventorship must be pursuant to § 1.48. If neither an application data sheet nor the inventor's oath or declaration is filed during the pendency of a nonprovisional application, the inventorship is the inventor or joint inventors set forth in the application papers filed pursuant to § 1.53(b), unless the applicant files a paper, including the processing fee set forth in § 1.17(i), supplying the name or names of the inventor or joint inventors. (c) The inventorship of a provisional application is the inventor or joint inventors set forth in the cover sheet as prescribed by § 1.51(c)(1). Once a cover sheet as prescribed by § 1.51(c)(1) is filed in a provisional application, any correction of inventorship must be pursuant to § 1.48. If a cover sheet as prescribed by § 1.51(c)(1) is not filed during the pendency of a provisional application, the inventorship is the inventor or joint inventors set forth in the application papers filed pursuant to § 1.53(c), unless applicant files a paper including the processing fee set forth in § 1.17(q), supplying the name or names of the inventor or joint inventors. (d) In a nonprovisional application under 35 U.S.C. 111(a) filed without an application data sheet or the inventor's oath or declaration, or in a provisional application filed without a cover sheet as prescribed by § 1.51(c)(1), the name and residence of each person believed to be an actual inventor should be provided when the application papers pursuant to § 1.53(b) or § 1.53(c) are filed. (e) The inventorship of an international application entering the national stage under 35 U.S.C. 371 is the inventor or joint inventors set forth in the application data sheet in accordance with § 1.76 filed with the initial submission under 35 U.S.C. 371. Unless the initial submission under 35 U.S.C. 371 is accompanied by an application data sheet in accordance with § 1.76 setting forth the inventor or joint inventors, the inventorship is the inventor or joint inventors set forth in the international application, which includes any change effected under PCT Rule 92 bis. (f) The inventorship of an international design application designating the United States is the creator or creators set forth in the publication of the international registration under Hague Agreement Article 10(3). Any correction of inventorship must be pursuant to § 1.48.

37 C.F.R. § 1.42 Applicant for patent.

(a) The word “applicant” when used in this title refers to the inventor or all of the joint inventors, or to the person applying for a patent as provided in §§ 1.43, 1.45, or 1.46. (b) If a person is applying for a patent as provided in § 1.46, the word “applicant” refers to the assignee, the person to whom the inventor is under an obligation to assign the invention, or the person who otherwise shows sufficient proprietary interest in the matter, who is applying for a patent under § 1.46 and not the inventor. (c) If fewer than all joint inventors are applying for a patent as provided in § 1.45, the phrase “the applicant” means the joint inventors who are applying for the patent without the omitted inventor(s). (d) Any person having authority may deliver an application and fees to the Office on behalf of the applicant. However, an oath or declaration, or substitute statement in lieu of an oath or declaration, may be executed only in accordance with § 1.63 or 1.64, a correspondence address may be provided only in accordance with § 1.33(a), and amendments and other papers must be signed in accordance with § 1.33(b). (e) The Office may require additional information where there is a question concerning ownership or interest in an application, and a showing may be required from the person filing the application that the filing was authorized where such authorization comes into question.

37 C.F.R. § 1.43 Application for patent by a legal representative of a deceased or legally incapacitated inventor.

If an inventor is deceased or under legal incapacity, the legal representative of the inventor may make an application for patent on behalf of the inventor. If an inventor dies during the time intervening between the filing of the application and the granting of a patent thereon, the letters patent may be issued to the legal representative upon proper intervention. See § 1.64 concerning the execution of a substitute statement by a legal representative in lieu of an oath or declaration.

37 C.F.R. § 1.45 Application for patent by joint inventors.

(a) Joint inventors must apply for a patent jointly, and each must make an inventor's oath or declaration as required by § 1.63, except as provided for in § 1.64. If a joint inventor refuses to join in an application for patent or cannot be found or reached after diligent effort, the other joint inventor or inventors may make the application for patent on behalf of themselves and the omitted inventor. See § 1.64 concerning the execution of a substitute statement by the other joint inventor or inventors in lieu of an oath or declaration. (b) Inventors may apply for a patent jointly even though: (1) They did not physically work together or at the same time; (2) Each inventor did not make the same type or amount of contribution; or (3) Each inventor did not make a contribution to the subject matter of every claim of the application. (c) If multiple inventors are named in a nonprovisional application, each named inventor must have made a contribution, individually or jointly, to the subject matter of at least one claim of the application and the application will be considered to be a joint application under 35 U.S.C. 116. If multiple inventors are named in a provisional application, each named inventor must have made a contribution, individually or jointly, to the subject matter disclosed in the provisional application and the provisional application will be considered to be a joint application under 35 U.S.C. 116.

37 C.F.R. § 1.46 Application for patent by an assignee, obligated assignee, or a person who otherwise shows sufficient proprietary interest in the matter.

(a) A person to whom the inventor has assigned or is under an obligation to assign the invention may make an application for patent. A person who otherwise shows sufficient proprietary interest in the matter may make an application for patent on behalf of and as agent for the inventor on proof of the pertinent facts and a showing that such action is appropriate to preserve the rights of the parties. (b) If an application under 35 U.S.C. 111 is made by a person other than the inventor under paragraph (a) of this section, the application must contain an application data sheet under § 1.76 specifying in the applicant information section (§ 1.76(b)(7)) the assignee, person to whom the inventor is under an obligation to assign the invention, or person who otherwise shows sufficient proprietary interest in the matter. If an application entering the national stage under 35 U.S.C. 371, or a nonprovisional international design application, is applied for by a person other than the inventor under paragraph (a) of this section, the assignee, person to whom the inventor is under an obligation to assign the invention, or person who otherwise shows sufficient proprietary interest in the matter must have been identified as the applicant for the United States in the international stage of the international application or as the applicant in the publication of the international registration under Hague Agreement Article 10(3). (1) If the applicant is the assignee or a person to whom the inventor is under an obligation to assign the invention, documentary evidence of ownership (e.g., assignment for an assignee, employment agreement for a person to whom the inventor is under an obligation to assign the invention) should be recorded as provided for in part 3 of this chapter no later than the date the issue fee is paid in the application. (2) If the applicant is a person who otherwise shows sufficient proprietary interest in the matter, such applicant must submit a petition including: (i) The fee set forth in § 1.17(g); (ii) A showing that such person has sufficient proprietary interest in the matter; and (iii) A statement that making the application for patent by a person who otherwise shows sufficient proprietary interest in the matter on behalf of and as agent for the inventor is appropriate to preserve the rights of the parties. (c)(1) Correction or update in the name of the applicant. Any request to correct or update the name of the applicant under this section must include an application data sheet under § 1.76 specifying the correct or updated name of the applicant in the applicant information section (§ 1.76(b)(7)) in accordance with § 1.76(c)(2). A change in the name of the applicant recorded pursuant to Hague Agreement Article 16(1)(ii) will be effective to change the name of the applicant in a nonprovisional international design application. (2) Change in the applicant. Any request to change the applicant under this section after an original applicant has been specified must include an application data sheet under § 1.76 specifying the applicant in the applicant information section (§ 1.76(b)(7)) in accordance with § 1.76(c)(2) and comply with §§ 3.71 and 3.73 of this title. (d) Even if the whole or a part interest in the invention or in the patent to be issued is assigned or obligated to be assigned, an oath or declaration must be executed by the actual inventor or each actual joint inventor, except as provided for in § 1.64. See § 1.64 concerning the execution of a substitute statement by an assignee, person to whom the inventor is under an obligation to assign the invention, or a person who otherwise shows sufficient proprietary interest in the matter. (e) If a patent is granted on an application filed under this section by a person other than the inventor, the patent shall be granted to the real party in interest. Otherwise, the patent may be issued to the assignee or jointly to the inventor and the assignee as provided in § 3.81. Where a real party in interest has filed an application under § 1.46, the applicant shall notify the Office of any change in the real party in interest no later than payment of the issue fee. The Office will treat the absence of such a notice as an indication that there has been no change in the real party in interest. (f) The Office may publish notice of the filing of the application by a person who otherwise shows sufficient proprietary interest in the Official Gazette.

37 C.F.R. § 1.48 Correction of inventorship pursuant to 35 U.S.C. 116 or correction of the name or order of names in a patent application, other than a reissue application.

(a) Nonprovisional application: Any request to correct or change the inventorship once the inventorship has been established under § 1.41 must include: (1) An application data sheet in accordance with § 1.76 that identifies each inventor by his or her legal name; and (2) The processing fee set forth in § 1.17(i). (b) Inventor's oath or declaration for added inventor: An oath or declaration as required by § 1.63, or a substitute statement in compliance with § 1.64, will be required for any actual inventor who has not yet executed such an oath or declaration. (c) Any request to correct or change the inventorship under paragraph (a) of this section filed after the Office action on the merits has been given or mailed in the application must also be accompanied by the fee set forth in § 1.17(d), unless the request is accompanied by a statement that the request to correct or change the inventorship is due solely to the cancelation of claims in the application. (d) Provisional application. Once a cover sheet as prescribed by § 1.51(c)(1) is filed in a provisional application, any request to correct or change the inventorship must include: (1) A request, signed by a party set forth in § 1.33(b), to correct the inventorship that identifies each inventor by his or her legal name; and (2) The processing fee set forth in § 1.17(q). (e) Additional information may be required. The Office may require such other information as may be deemed appropriate under the particular circumstances surrounding the correction of inventorship. (f) Correcting or updating the name of an inventor: Any request to correct or update the name of the inventor or a joint inventor, or the order of the names of joint inventors, in a nonprovisional application must include: (1) An application data sheet in accordance with § 1.76 that identifies each inventor by his or her legal name in the desired order; and (2) The processing fee set forth in § 1.17(i). (g) Reissue applications not covered. The provisions of this section do not apply to reissue applications. See §§ 1.171 and 1.175 for correction of inventorship in a patent via a reissue application. (h) Correction of inventorship in patent. See § 1.324 for correction of inventorship in a patent. (i) Correction of inventorship in an interference or contested case before the Patent Trial and Appeal Board. In an interference under part 41, subpart D, of this title, a request for correction of inventorship in an application must be in the form of a motion under § 41.121(a)(2) of this title. In a contested case under part 42, subpart D, of this title, a request for correction of inventorship in an application must be in the form of a motion under § 42.22 of this title. The motion under § 41.121(a)(2) or 42.22 of this title must comply with the requirements of paragraph (a) of this section.

37 C.F.R. § 1.248 Service of papers; manner of service; proof of service in cases other than interferences and trials.

(a) Service of papers must be on the attorney or agent of the party if there be such or on the party if there is no attorney or agent, and may be made in any of the following ways: (1) By delivering a copy of the paper to the person served; (2) By leaving a copy at the usual place of business of the person served with someone in his employment; (3) When the person served has no usual place of business, by leaving a copy at the person's residence, with some person of suitable age and discretion who resides there; (4) Transmission by first class mail. When service is by mail the date of mailing will be regarded as the date of service; (5) Whenever it shall be satisfactorily shown to the Director that none of the above modes of obtaining or serving the paper is practicable, service may be by notice published in the Official Gazette. (b) Papers filed in the Patent and Trademark Office which are required to be served shall contain proof of service. Proof of service may appear on or be affixed to papers filed. Proof of service shall include the date and manner of service. In the case of personal service, proof of service shall also include the name of any person served, certified by the person who made service. Proof of service may be made by: (1) An acknowledgement of service by or on behalf of the person served or (2) A statement signed by the attorney or agent containing the information required by this section. (c) See § 41.106(e) or § 42.6(e) of this title for service of papers in contested cases or trials before the Patent Trial and Appeal Board.

37 C.F.R. § 1.251 Unlocatable file.

(a) In the event that the Office cannot locate the file of an application, patent, or other patent-related proceeding after a reasonable search, the Office will notify the applicant or patentee and set a time period within which the applicant or patentee must comply with the notice in accordance with one of paragraphs (a)(1), (a)(2), or (a)(3) of this section. (1) Applicant or patentee may comply with a notice under this section by providing: (i) A copy of the applicant's or patentee's record (if any) of all of the correspondence between the Office and the applicant or patentee for such application, patent, or other proceeding (except for U.S. patent documents); (ii) A list of such correspondence; and (iii) A statement that the copy is a complete and accurate copy of the applicant's or patentee's record of all of the correspondence between the Office and the applicant or patentee for such application, patent, or other proceeding (except for U.S. patent documents), and whether applicant or patentee is aware of any correspondence between the Office and the applicant or patentee for such application, patent, or other proceeding that is not among applicant's or patentee's records. (2) Applicant or patentee may comply with a notice under this section by: (i) Producing the applicant's or patentee's record (if any) of all of the correspondence between the Office and the applicant or patentee for such application, patent, or other proceeding for the Office to copy (except for U.S. patent documents); and (ii) Providing a statement that the papers produced by applicant or patentee are applicant's or patentee's complete record of all of the correspondence between the Office and the applicant or patentee for such application, patent, or other proceeding (except for U.S. patent documents), and whether applicant or patentee is aware of any correspondence between the Office and the applicant or patentee for such application, patent, or other proceeding that is not among applicant's or patentee's records. (3) If applicant or patentee does not possess any record of the correspondence between the Office and the applicant or patentee for such application, patent, or other proceeding, applicant or patentee must comply with a notice under this section by providing a statement that applicant or patentee does not possess any record of the correspondence between the Office and the applicant or patentee for such application, patent, or other proceeding. (b) With regard to a pending application, failure to comply with one of paragraphs (a)(1), (a)(2), or (a)(3) of this section within the time period set in the notice will result in abandonment of the application.

37 C.F.R. § 1.171 Application for reissue.

An application for reissue must contain the same parts required for an application for an original patent, complying with all the rules relating thereto except as otherwise provided, and in addition, must comply with the requirements of the rules relating to reissue applications.

37 C.F.R. § 1.172 Reissue applicant.

(a) The reissue applicant is the original patentee, or the current patent owner if there has been an assignment. A reissue application must be accompanied by the written consent of all assignees, if any, currently owning an undivided interest in the patent. All assignees consenting to the reissue must establish their ownership in the patent by filing in the reissue application a submission in accordance with the provisions of § 3.73(c) of this chapter. (b) A reissue will be granted to the original patentee, his legal representatives or assigns as the interest may appear.

37 C.F.R. § 1.173 Reissue specification, drawings, and amendments.

(a) Contents of a reissue application. An application for reissue must contain the entire specification, including the claims, and the drawings of the patent. No new matter shall be introduced into the application. No reissue patent shall be granted enlarging the scope of the claims of the original patent unless applied for within two years from the grant of the original patent, pursuant to 35 U.S.C. 251. (1) Specification, including claims. The entire specification, including the claims, of the patent for which reissue is requested must be furnished in the form of a copy of the printed patent, in double column format, each page on only one side of a single sheet of paper. If an amendment of the reissue application is to be included, it must be made pursuant to paragraph (b) of this section. The formal requirements for papers making up the reissue application other than those set forth in this section are set out in § 1.52. Additionally, a copy of any disclaimer (§ 1.321), certificate of correction (§§ 1.322 through 1.324), or reexamination certificate (§ 1.570) issued in the patent must be included. (See also § 1.178). (2) Drawings. Applicant must submit a clean copy of each drawing sheet of the printed patent at the time the reissue application is filed. If such copy complies with § 1.84, no further drawings will be required. Where a drawing of the reissue application is to include any changes relative to the patent being reissued, the changes to the drawing must be made in accordance with paragraph (b)(3) of this section. The Office will not transfer the drawings from the patent file to the reissue application. (b) Making amendments in a reissue application. An amendment in a reissue application is made either by physically incorporating the changes into the specification when the application is filed, or by a separate amendment paper. If amendment is made by incorporation, markings pursuant to paragraph (d) of this section must be used. If amendment is made by an amendment paper, the paper must direct that specified changes be made, as follows: (1) Specification other than the claims, “Large Tables” (§ 1.58(c)), a “Computer Program Listing Appendix” (§ 1.96(c)), a “Sequence Listing” (§ 1.821(c)), or a “Sequence Listing XML” (§ 1.831(a)). (i) Changes to the specification, other than to the claims, “Large Tables” (§ 1.58(c)), a “Computer Program Listing Appendix” (§ 1.96(c)), a “Sequence Listing” (§ 1.821(c)), or a “Sequence Listing XML” (§ 1.831(a)), must be made by submission of the entire text of an added or rewritten paragraph, including markings pursuant to paragraph (d) of this section, except that an entire paragraph may be deleted by a statement deleting the paragraph, without presentation of the text of the paragraph. The precise point in the specification where any added or rewritten paragraph is located must be identified. (ii) Changes to “Large Tables,” a “Computer Program Listing Appendix,” a “Sequence Listing,” or a “Sequence Listing XML” must be made in accordance with § 1.58(g) for “Large Tables,” § 1.96(c)(5) for a “Computer Program Listing Appendix,” § 1.825 for a “Sequence Listing,” and § 1.835 for a “Sequence Listing XML.” (2) Claims. An amendment paper must include the entire text of each claim being changed by such amendment paper and of each claim being added by such amendment paper. For any claim changed by the amendment paper, a parenthetical expression “amended,” “twice amended,” etc., should follow the claim number. Each changed patent claim and each added claim must include markings pursuant to paragraph (d) of this section, except that a patent claim or added claim should be canceled by a statement canceling the claim without presentation of the text of the claim. (3) Drawings. One or more patent drawings shall be amended in the following manner: Any changes to a patent drawing must be submitted as a replacement sheet of drawings which shall be an attachment to the amendment document. Any replacement sheet of drawings must be in compliance with § 1.84 and shall include all of the figures appearing on the original version of the sheet, even if only one figure is amended. Amended figures must be identified as “Amended,” and any added figure must be identified as “New.” In the event that a figure is canceled, the figure must be surrounded by brackets and identified as “Canceled.” All changes to the drawing(s) shall be explained, in detail, beginning on a separate sheet accompanying the papers including the amendment to the drawings. (i) A marked-up copy of any amended drawing figure, including annotations indicating the changes made, may be included. The marked-up copy must be clearly labeled as “Annotated Marked-up Drawings” and must be presented in the amendment or remarks section that explains the change to the drawings. (ii) A marked-up copy of any amended drawing figure, including annotations indicating the changes made, must be provided when required by the examiner. (c) Status of claims and support for claim changes. Whenever there is an amendment to the claims pursuant to paragraph (b) of this section, there must also be supplied, on pages separate from the pages containing the changes, the status (i.e., pending or canceled), as of the date of the amendment, of all patent claims and of all added claims, and an explanation of the support in the disclosure of the patent for the changes made to the claims. (d) Changes shown by markings. Any changes relative to the patent being reissued that are made to the specification, including the claims but excluding “Large Tables” (§ 1.58(c)), a “Computer Program Listing Appendix” (§ 1.96(c)), a “Sequence Listing” (§ 1.821(c)), and a “Sequence Listing XML” (§ 1.831(a)) upon filing or by an amendment paper in the reissue application, must include the following markings: (1) The matter to be omitted by reissue must be enclosed in brackets; and (2) The matter to be added by reissue must be underlined. (e) Numbering of patent claims preserved. Patent claims may not be renumbered. The numbering of any claim added in the reissue application must follow the number of the highest numbered patent claim. (f) Amendment of disclosure may be required. The disclosure must be amended, when required by the Office, to correct inaccuracies of description and definition, and to secure substantial correspondence between the claims, the remainder of the specification, and the drawings. (g) Amendments made relative to the patent. All amendments must be made relative to the patent specification, including the claims, and drawings, which are in effect as of the date of filing of the reissue application.

37 C.F.R. § 1.175 Inventor's oath or declaration for a reissue application.

(a) The inventor's oath or declaration for a reissue application, in addition to complying with the requirements of § 1.63, § 1.64, or § 1.67, must also specifically identify at least one error pursuant to 35 U.S.C. 251 being relied upon as the basis for reissue and state that the applicant believes the original patent to be wholly or partly inoperative or invalid by reason of a defective specification or drawing, or by reason of the patentee claiming more or less than the patentee had the right to claim in the patent. (b) If the reissue application seeks to enlarge the scope of the claims of the patent (a basis for the reissue is the patentee claiming less than the patentee had the right to claim in the patent), the inventor's oath or declaration for a reissue application must identify a claim that the application seeks to broaden. A claim is a broadened claim if the claim is broadened in any respect. (c) The inventor, or each individual who is a joint inventor of a claimed invention, in a reissue application must execute an oath or declaration for the reissue application, except as provided for in § 1.64, and except that the inventor's oath or declaration for a reissue application may be signed by the assignee of the entire interest if: (1) The application does not seek to enlarge the scope of the claims of the original patent; or (2) The application for the original patent was filed under § 1.46 by the assignee of the entire interest. (d) If errors previously identified in the inventor's oath or declaration for a reissue application pursuant to paragraph (a) of this section are no longer being relied upon as the basis for reissue, the applicant must identify an error being relied upon as the basis for reissue. (e) The inventor's oath or declaration for a reissue application required by paragraph (a) of this section may be submitted under the provisions of § 1.53(f), except that the provisions of § 1.53(f)(3) do not apply to a reissue application. (f)(1) The requirement for the inventor's oath or declaration for a continuing reissue application that claims the benefit under 35 U.S.C. 120, 121, 365(c), or 386(c) in compliance with § 1.78 of an earlier-filed reissue application may be satisfied by a copy of the inventor's oath or declaration from the earlier-filed reissue application, provided that: (i) The inventor, or each individual who is a joint inventor of a claimed invention, in the reissue application executed an inventor's oath or declaration for the earlier-filed reissue application, except as provided for in § 1.64; (ii) The continuing reissue application does not seek to enlarge the scope of the claims of the original patent; or (iii) The application for the original patent was filed under § 1.46 by the assignee of the entire interest. (2) If all errors identified in the inventor's oath or declaration from the earlier-filed reissue application are no longer being relied upon as the basis for reissue, the applicant must identify an error being relied upon as the basis for reissue. (g) An oath or declaration filed at any time pursuant to 35 U.S.C. 115(h)(1), will be placed in the file record of the reissue application, but may not necessarily be reviewed by the Office.

37 C.F.R. § 1.176 Examination of reissue.

(a) A reissue application will be examined in the same manner as a non-reissue, non-provisional application, and will be subject to all the requirements of the rules related to non-reissue applications. Applications for reissue will be acted on by the examiner in advance of other applications. (b) Restriction between subject matter of the original patent claims and previously unclaimed subject matter may be required (restriction involving only subject matter of the original patent claims will not be required). If restriction is required, the subject matter of the original patent claims will be held to be constructively elected unless a disclaimer of all the patent claims is filed in the reissue application, which disclaimer cannot be withdrawn by applicant.

37 C.F.R. § 1.177 Issuance of multiple reissue patents.

(a) The Office may reissue a patent as multiple reissue patents. If applicant files more than one application for the reissue of a single patent, each such application must contain or be amended to contain in the first sentence of the specification a notice stating that more than one reissue application has been filed and identifying each of the reissue applications by relationship, application number and filing date. The Office may correct by certificate of correction under § 1.322 any reissue patent resulting from an application to which this paragraph applies that does not contain the required notice. (b) If applicant files more than one application for the reissue of a single patent, each claim of the patent being reissued must be presented in each of the reissue applications as an amended, unamended, or canceled (shown in brackets) claim, with each such claim bearing the same number as in the patent being reissued. The same claim of the patent being reissued may not be presented in its original unamended form for examination in more than one of such multiple reissue applications. The numbering of any added claims in any of the multiple reissue applications must follow the number of the highest numbered original patent claim. (c) If any one of the several reissue applications by itself fails to correct an error in the original patent as required by 35 U.S.C. 251 but is otherwise in condition for allowance, the Office may suspend action in the allowable application until all issues are resolved as to at least one of the remaining reissue applications. The Office may also merge two or more of the multiple reissue applications into a single reissue application. No reissue application containing only unamended patent claims and not correcting an error in the original patent will be passed to issue by itself.

37 C.F.R. § 1.178 Original patent; continuing duty of applicant.

(a) The application for reissue of a patent shall constitute an offer to surrender that patent, and the surrender shall take effect upon reissue of the patent. Until a reissue application is granted, the original patent shall remain in effect. (b) In any reissue application before the Office, the applicant must call to the attention of the Office any prior or concurrent proceedings in which the patent (for which reissue is requested) is or was involved, such as interferences or trials before the Patent Trial and Appeal Board, reissues, reexaminations, or litigations and the results of such proceedings (see also § 1.173(a)(1)).

37 C.F.R. § 1.290 Submissions by third parties in applications.

(a) A third party may submit, for consideration and entry in the record of a patent application, any patents, published patent applications, or other printed publications of potential relevance to the examination of the application if the submission is made in accordance with 35 U.S.C. 122(e) and this section. A third-party submission may not be entered or considered by the Office if any part of the submission is not in compliance with 35 U.S.C. 122(e) and this section. (b) Any third-party submission under this section must be filed prior to the earlier of: (1) The date a notice of allowance under § 1.311 is given or mailed in the application; or (2) The later of: (i) Six months after the date on which the application is first published by the Office under 35 U.S.C. 122(b) and § 1.211, or (ii) The date the first rejection under § 1.104 of any claim by the examiner is given or mailed during the examination of the application. (c) Any third-party submission under this section must be made in writing. (d) Any third-party submission under this section must include: (1) A document list identifying the documents, or portions of documents, being submitted in accordance with paragraph (e) of this section; (2) A concise description of the asserted relevance of each item identified in the document list; (3) A legible copy of each item identified in the document list, other than U.S. patents and U.S. patent application publications; (4) An English language translation of any non-English language item identified in the document list; and (5) A statement by the party making the submission that: (i) The party is not an individual who has a duty to disclose information with respect to the application under § 1.56; and (ii) The submission complies with the requirements of 35 U.S.C. 122(e) and this section. (e) The document list required by paragraph (d)(1) of this section must include a heading that identifies the list as a third-party submission under § 1.290, identify on each page of the list the application number of the application in which the submission is being filed, list U.S. patents and U.S. patent application publications in a separate section from other items, and identify each: (1) U.S. patent by patent number, first named inventor, and issue date; (2) U.S. patent application publication by patent application publication number, first named inventor, and publication date; (3) Foreign patent or published foreign patent application by the country or patent office that issued the patent or published the application; the applicant, patentee, or first named inventor; an appropriate document number; and the publication date indicated on the patent or published application; and (4) Non-patent publication by author (if any), title, pages being submitted, publication date, and, where available, publisher and place of publication. If no publication date is known, the third party must provide evidence of publication. (f) Any third-party submission under this section must be accompanied by the fee set forth in § 1.17(o) for every ten items or fraction thereof identified in the document list. (g) The fee otherwise required by paragraph (f) of this section is not required for a submission listing three or fewer total items that is accompanied by a statement by the party making the submission that, to the knowledge of the person signing the statement after making reasonable inquiry, the submission is the first and only submission under 35 U.S.C. 122(e) filed in the application by the party or a party in privity with the party. (h) In the absence of a request by the Office, an applicant need not reply to a submission under this section. (i) The provisions of § 1.8 do not apply to the time periods set forth in this section.

37 C.F.R. § 1.291 Protests by the public against pending applications.

(a) A protest may be filed by a member of the public against a pending application, and it will be matched with the application file if it adequately identifies the patent application. A protest submitted within the time frame of paragraph (b) of this section, which is not matched, or not matched in a timely manner to permit review by the examiner during prosecution, due to inadequate identification, may not be entered and may be returned to the protestor where practical, or, if return is not practical, discarded. (b) The protest will be entered into the record of the application if, in addition to complying with paragraph (c) of this section, the protest has been served upon the applicant in accordance with § 1.248, or filed with the Office in duplicate in the event service is not possible; and, except for paragraph (b)(1) of this section, the protest was filed prior to the date the application was published under § 1.211, or the date a notice of allowance under § 1.311 was given or mailed, whichever occurs first: (1) If a protest is accompanied by the written consent of the applicant, the protest will be considered if the protest is filed prior to the date a notice of allowance under § 1.311 is given or mailed in the application. (2) A statement must accompany a protest that it is the first protest submitted in the application by the real party in interest who is submitting the protest; or the protest must comply with paragraph (c)(5) of this section. This section does not apply to the first protest filed in an application. (c) In addition to compliance with paragraphs (a) and (b) of this section, a protest must include: (1) An information list of the documents, portions of documents, or other information being submitted, where each: (i) U.S. patent is identified by patent number, first named inventor, and issue date; (ii) U.S. patent application publication is identified by patent application publication number, first named inventor, and publication date; (iii) Foreign patent or published foreign patent application is identified by the country or patent office that issued the patent or published the application; an appropriate document number; the applicant, patentee, or first named inventor; and the publication date indicated on the patent or published application; (iv) Non-patent publication is identified by author (if any), title, pages being submitted, publication date, and, where available, publisher and place of publication; and (v) Item of other information is identified by date, if known. (2) A concise explanation of the relevance of each item identified in the information list pursuant to paragraph (c)(1) of this section; (3) A legible copy of each item identified in the information list, other than U.S. patents and U.S. patent application publications; (4) An English language translation of any non-English language item identified in the information list; and (5) If it is a second or subsequent protest by the same real party in interest, an explanation as to why the issue(s) raised in the second or subsequent protest are significantly different than those raised earlier and why the significantly different issue(s) were not presented earlier, and a processing fee under § 1.17(i) must be submitted. (d) A member of the public filing a protest in an application under this section will not receive any communication from the Office relating to the protest, other than the return of a self-addressed postcard which the member of the public may include with the protest in order to receive an acknowledgment by the Office that the protest has been received. The limited involvement of the member of the public filing a protest pursuant to this section ends with the filing of the protest, and no further submission on behalf of the protestor will be considered, unless the submission is made pursuant to paragraph (c)(5) of this section. (e) Where a protest raising inequitable conduct issues satisfies the provisions of this section for entry, it will be entered into the application file, generally without comment on the inequitable conduct issues raised in it. (f) In the absence of a request by the Office, an applicant need not reply to a protest. (g) Protests that fail to comply with paragraphs (b) or (c) of this section may not be entered, and if not entered, will be returned to the protestor, or discarded, at the option of the Office.

37 C.F.R. § 1.81 Drawings required in patent application.

(a) The applicant for a patent is required to furnish a drawing of the invention where necessary for the understanding of the subject matter sought to be patented. Since corrections are the responsibility of the applicant, the original drawing(s) should be retained by the applicant for any necessary future correction. (b) Drawings may include illustrations which facilitate an understanding of the invention (for example, flow sheets in cases of processes, and diagrammatic views). (c) Whenever the nature of the subject matter sought to be patented admits of illustration by a drawing without its being necessary for the understanding of the subject matter and the applicant has not furnished such a drawing, the examiner will require its submission within a time period of not less than two months from the date of the sending of a notice thereof. (d) Drawings submitted after the filing date of the application may not be used to overcome any insufficiency of the specification due to lack of an enabling disclosure or otherwise inadequate disclosure therein, or to supplement the original disclosure thereof for the purpose of interpretation of the scope of any claim.

37 C.F.R. § 1.83 Content of drawing.

(a) The drawing in a nonprovisional application must show every feature of the invention specified in the claims. However, conventional features disclosed in the description and claims, where their detailed illustration is not essential for a proper understanding of the invention, should be illustrated in the drawing in the form of a graphical drawing symbol or a labeled representation (e.g., a labeled rectangular box). In addition, tables that are included in the specification and sequences that are included in sequence listings should not be duplicated in the drawings. (b) When the invention consists of an improvement on an old machine the drawing must when possible exhibit, in one or more views, the improved portion itself, disconnected from the old structure, and also in another view, so much only of the old structure as will suffice to show the connection of the invention therewith. (c) Where the drawings in a nonprovisional application do not comply with the requirements of paragraphs (a) and (b) of this section, the examiner shall require such additional illustration within a time period of not less than two months from the date of the sending of a notice thereof. Such corrections are subject to the requirements of § 1.81(d).

37 C.F.R. § 1.84 Standards for drawings.

(a) Drawings. There are two acceptable categories for presenting drawings in utility and design patent applications. (1) Black ink. Black and white drawings are normally required. India ink, or its equivalent that secures solid black lines, must be used for drawings; or (2) Color. Color drawings are permitted in design applications. Where a design application contains color drawings, the application must include the number of sets of color drawings required by paragraph (a)(2)(ii) of this section and the specification must contain the reference required by paragraph (a)(2)(iii) of this section. On rare occasions, color drawings may be necessary as the only practical medium by which to disclose the subject matter sought to be patented in a utility patent application. The color drawings must be of sufficient quality such that all details in the drawings are reproducible in black and white in the printed patent. Color drawings are not permitted in international applications (see PCT Rule 11.13). The Office will accept color drawings in utility patent applications only after granting a petition filed under this paragraph explaining why the color drawings are necessary. Any such petition must include the following: (i) The fee set forth in § 1.17(h); (ii) One (1) set of color drawings if submitted via the USPTO patent electronic filing system or three (3) sets of color drawings if not submitted via the USPTO patent electronic filing system; and (iii) An amendment to the specification to insert (unless the specification contains or has been previously amended to contain) the following language as the first paragraph of the brief description of the drawings: (b) Photographs—(1) Black and white. Photographs, including photocopies of photographs, are not ordinarily permitted in utility and design patent applications. The Office will accept photographs in utility and design patent applications, however, if photographs are the only practicable medium for illustrating the claimed invention. For example, photographs or photomicrographs of: electrophoresis gels, blots (e.g., immunological, western, Southern, and northern), autoradiographs, cell cultures (stained and unstained), histological tissue cross sections (stained and unstained), animals, plants, in vivo imaging, thin layer chromatography plates, crystalline structures, and, in a design patent application, ornamental effects, are acceptable. If the subject matter of the application admits of illustration by a drawing, the examiner may require a drawing in place of the photograph. The photographs must be of sufficient quality so that all details in the photographs are reproducible in the printed patent. (2) Color photographs. Color photographs will be accepted in utility and design patent applications if the conditions for accepting color drawings and black and white photographs have been satisfied. See paragraphs (a)(2) and (b)(1) of this section. (c) Identification of drawings. Identifying indicia should be provided, and if provided, should include the title of the invention, inventor's name, and application number, or docket number (if any) if an application number has not been assigned to the application. If this information is provided, it must be placed on the front of each sheet within the top margin. Each drawing sheet submitted after the filing date of an application must be identified as either “Replacement Sheet” or “New Sheet” pursuant to § 1.121(d). If a marked-up copy of any amended drawing figure including annotations indicating the changes made is filed, such marked-up copy must be clearly labeled as “Annotated Sheet” pursuant to § 1.121(d)(1). (d) Graphic forms in drawings. Chemical or mathematical formulae, tables, and waveforms may be submitted as drawings, and are subject to the same requirements as drawings. Each chemical or mathematical formula must be labeled as a separate figure, using brackets when necessary, to show that information is properly integrated. Each group of waveforms must be presented as a single figure, using a common vertical axis with time extending along the horizontal axis. Each individual waveform discussed in the specification must be identified with a separate letter designation adjacent to the vertical axis. (e) Type of paper. Drawings submitted to the Office must be made on paper which is flexible, strong, white, smooth, non-shiny, and durable. All sheets must be reasonably free from cracks, creases, and folds. Only one side of the sheet may be used for the drawing. Each sheet must be reasonably free from erasures and must be free from alterations, overwritings, and interlineations. Photographs must be developed on paper meeting the sheet-size requirements of paragraph (f) of this section and the margin requirements of paragraph (g) of this section. See paragraph (b) of this section for other requirements for photographs. (f) Size of paper. All drawing sheets in an application must be the same size. One of the shorter sides of the sheet is regarded as its top. The size of the sheets on which drawings are made must be: (1) 21.0 cm. by 29.7 cm. (DIN size A4), or (2) 21.6 cm. by 27.9 cm. (8 1/2 by 11 inches). (g) Margins. The sheets must not contain frames around the sight (i.e., the usable surface), but should have scan target points (i.e., cross-hairs) printed on two catercorner margin corners. Each sheet must include a top margin of at least 2.5 cm. (1 inch), a left side margin of at least 2.5 cm. (1 inch), a right side margin of at least 1.5 cm. ( 5/8 inch), and a bottom margin of at least 1.0 cm. ( 3/8 inch), thereby leaving a sight no greater than 17.0 cm. by 26.2 cm. on 21.0 cm. by 29.7 cm. (DIN size A4) drawing sheets, and a sight no greater than 17.6 cm. by 24.4 cm. (6 15/16 by 9 5/8 inches) on 21.6 cm. by 27.9 cm. (8 1/2 by 11 inch) drawing sheets. (h) Views. The drawing must contain as many views as necessary to show the invention. The views may be plan, elevation, section, or perspective views. Detail views of portions of elements, on a larger scale if necessary, may also be used. All views of the drawing must be grouped together and arranged on the sheet(s) without wasting space, preferably in an upright position, clearly separated from one another, and must not be included in the sheets containing the specifications, claims, or abstract. Views must not be connected by projection lines and must not contain center lines. Waveforms of electrical signals may be connected by dashed lines to show the relative timing of the waveforms. (1) Exploded views. Exploded views, with the separated parts embraced by a bracket, to show the relationship or order of assembly of various parts are permissible. When an exploded view is shown in a figure which is on the same sheet as another figure, the exploded view should be placed in brackets. (2) Partial views. When necessary, a view of a large machine or device in its entirety may be broken into partial views on a single sheet, or extended over several sheets if there is no loss in facility of understanding the view. Partial views drawn on separate sheets must always be capable of being linked edge to edge so that no partial view contains parts of another partial view. A smaller scale view should be included showing the whole formed by the partial views and indicating the positions of the parts shown. When a portion of a view is enlarged for magnification purposes, the view and the enlarged view must each be labeled as separate views. (i) Where views on two or more sheets form, in effect, a single complete view, the views on the several sheets must be so arranged that the complete figure can be assembled without concealing any part of any of the views appearing on the various sheets. (ii) A very long view may be divided into several parts placed one above the other on a single sheet. However, the relationship between the different parts must be clear and unambiguous. (3) Sectional views. The plane upon which a sectional view is taken should be indicated on the view from which the section is cut by a broken line. The ends of the broken line should be designated by Arabic or Roman numerals corresponding to the view number of the sectional view, and should have arrows to indicate the direction of sight. Hatching must be used to indicate section portions of an object, and must be made by regularly spaced oblique parallel lines spaced sufficiently apart to enable the lines to be distinguished without difficulty. Hatching should not impede the clear reading of the reference characters and lead lines. If it is not possible to place reference characters outside the hatched area, the hatching may be broken off wherever reference characters are inserted. Hatching must be at a substantial angle to the surrounding axes or principal lines, preferably 45°. A cross section must be set out and drawn to show all of the materials as they are shown in the view from which the cross section was taken. The parts in cross section must show proper material(s) by hatching with regularly spaced parallel oblique strokes, the space between strokes being chosen on the basis of the total area to be hatched. The various parts of a cross section of the same item should be hatched in the same manner and should accurately and graphically indicate the nature of the material(s) that is illustrated in cross section. The hatching of juxtaposed different elements must be angled in a different way. In the case of large areas, hatching may be confined to an edging drawn around the entire inside of the outline of the area to be hatched. Different types of hatching should have different conventional meanings as regards the nature of a material seen in cross section. (4) Alternate position. A moved position may be shown by a broken line superimposed upon a suitable view if this can be done without crowding; otherwise, a separate view must be used for this purpose. (5) Modified forms. Modified forms of construction must be shown in separate views. (i) Arrangement of views. One view must not be placed upon another or within the outline of another. All views on the same sheet should stand in the same direction and, if possible, stand so that they can be read with the sheet held in an upright position. If views wider than the width of the sheet are necessary for the clearest illustration of the invention, the sheet may be turned on its side so that the top of the sheet, with the appropriate top margin to be used as the heading space, is on the right-hand side. Words must appear in a horizontal, left-to-right fashion when the page is either upright or turned so that the top becomes the right side, except for graphs utilizing standard scientific convention to denote the axis of abscissas (of X) and the axis of ordinates (of Y). (j) Front page view. The drawing must contain as many views as necessary to show the invention. One of the views should be suitable for inclusion on the front page of the patent application publication and patent as the illustration of the invention. Views must not be connected by projection lines and must not contain center lines. Applicant may suggest a single view (by figure number) for inclusion on the front page of the patent application publication and patent. (k) Scale. The scale to which a drawing is made must be large enough to show the mechanism without crowding when the drawing is reduced in size to two-thirds in reproduction. Indications such as “actual size” or “scale 1/2” on the drawings are not permitted since these lose their meaning with reproduction in a different format. (l) Character of lines, numbers, and letters. All drawings must be made by a process which will give them satisfactory reproduction characteristics. Every line, number, and letter must be durable, clean, black (except for color drawings), sufficiently dense and dark, and uniformly thick and well-defined. The weight of all lines and letters must be heavy enough to permit adequate reproduction. This requirement applies to all lines however fine, to shading, and to lines representing cut surfaces in sectional views. Lines and strokes of different thicknesses may be used in the same drawing where different thicknesses have a different meaning. (m) Shading. The use of shading in views is encouraged if it aids in understanding the invention and if it does not reduce legibility. Shading is used to indicate the surface or shape of spherical, cylindrical, and conical elements of an object. Flat parts may also be lightly shaded. Such shading is preferred in the case of parts shown in perspective, but not for cross sections. See paragraph (h)(3) of this section. Spaced lines for shading are preferred. These lines must be thin, as few in number as practicable, and they must contrast with the rest of the drawings. As a substitute for shading, heavy lines on the shade side of objects can be used except where they superimpose on each other or obscure reference characters. Light should come from the upper left corner at an angle of 45°. Surface delineations should preferably be shown by proper shading. Solid black shading areas are not permitted, except when used to represent bar graphs or color. (n) Symbols. Graphical drawing symbols may be used for conventional elements when appropriate. The elements for which such symbols and labeled representations are used must be adequately identified in the specification. Known devices should be illustrated by symbols which have a universally recognized conventional meaning and are generally accepted in the art. Other symbols which are not universally recognized may be used, subject to approval by the Office, if they are not likely to be confused with existing conventional symbols, and if they are readily identifiable. (o) Legends. Suitable descriptive legends may be used subject to approval by the Office, or may be required by the examiner where necessary for understanding of the drawing. They should contain as few words as possible. (p) Numbers, letters, and reference characters. (1) Reference characters (numerals are preferred), sheet numbers, and view numbers must be plain and legible, and must not be used in association with brackets or inverted commas, or enclosed within outlines, e.g., encircled. They must be oriented in the same direction as the view so as to avoid having to rotate the sheet. Reference characters should be arranged to follow the profile of the object depicted. (2) The English alphabet must be used for letters, except where another alphabet is customarily used, such as the Greek alphabet to indicate angles, wavelengths, and mathematical formulas. (3) Numbers, letters, and reference characters must measure at least .32 cm. ( 1/8 inch) in height. They should not be placed in the drawing so as to interfere with its comprehension. Therefore, they should not cross or mingle with the lines. They should not be placed upon hatched or shaded surfaces. When necessary, such as indicating a surface or cross section, a reference character may be underlined and a blank space may be left in the hatching or shading where the character occurs so that it appears distinct. (4) The same part of an invention appearing in more than one view of the drawing must always be designated by the same reference character, and the same reference character must never be used to designate different parts. (5) Reference characters not mentioned in the description shall not appear in the drawings. Reference characters mentioned in the description must appear in the drawings. (q) Lead lines. Lead lines are those lines between the reference characters and the details referred to. Such lines may be straight or curved and should be as short as possible. They must originate in the immediate proximity of the reference character and extend to the feature indicated. Lead lines must not cross each other. Lead lines are required for each reference character except for those which indicate the surface or cross section on which they are placed. Such a reference character must be underlined to make it clear that a lead line has not been left out by mistake. Lead lines must be executed in the same way as lines in the drawing. See paragraph (l) of this section. (r) Arrows. Arrows may be used at the ends of the lines, provided that their meaning is clear, as follows: (1) On a lead line, a freestanding arrow to indicate the entire section towards which it points; (2) On a lead line, an arrow touching a line to indicate the surface shown by the line looking along the direction of the arrow; or (3) To show the direction of movement. (s) Copyright or Mask Work Notice. A copyright or mask work notice may appear in the drawing, but must be placed within the sight of the drawing immediately below the figure representing the copyright or mask work material and be limited to letters having a print size of .32 cm. to .64 cm. ( 1/8 to 1/4 inches) high. The content of the notice must be limited to only those elements provided for by law. For example, “© 1983 John Doe” (17 U.S.C. 401) and “*M* John Doe” (17 U.S.C. 909) would be properly limited and, under current statutes, legally sufficient notices of copyright and mask work, respectively. Inclusion of a copyright or mask work notice will be permitted only if the authorization language set forth in § 1.71(e) is included at the beginning (preferably as the first paragraph) of the specification. (t) Numbering of sheets of drawings. The sheets of drawings should be numbered in consecutive Arabic numerals, starting with 1, within the sight as defined in paragraph (g) of this section. These numbers, if present, must be placed in the middle of the top of the sheet, but not in the margin. The numbers can be placed on the right-hand side if the drawing extends too close to the middle of the top edge of the usable surface. The drawing sheet numbering must be clear and larger than the numbers used as reference characters to avoid confusion. The number of each sheet should be shown by two Arabic numerals placed on either side of an oblique line, with the first being the sheet number, and the second being the total number of sheets of drawings, with no other marking. (u) Numbering of views. (1) The different views must be numbered in consecutive Arabic numerals, starting with 1, independent of the numbering of the sheets and, if possible, in the order in which they appear on the drawing sheet(s). Partial views intended to form one complete view, on one or several sheets, must be identified by the same number followed by a capital letter. View numbers must be preceded by the abbreviation “FIG.” Where only a single view is used in an application to illustrate the claimed invention, it must not be numbered and the abbreviation “FIG.” must not appear. (2) Numbers and letters identifying the views must be simple and clear and must not be used in association with brackets, circles, or inverted commas. The view numbers must be larger than the numbers used for reference characters. (v) Security markings. Authorized security markings may be placed on the drawings provided they are outside the sight, preferably centered in the top margin. (w) Corrections. Any corrections on drawings submitted to the Office must be durable and permanent. (x) Holes. No holes should be made by applicant in the drawing sheets. (y) Types of drawings. See § 1.152 for design drawings, § 1.1026 for international design reproductions, § 1.165 for plant drawings, and § 1.173(a)(2) for reissue drawings. The patent or application file contains at least one drawing executed in color. Copies of this patent or patent application publication with color drawing(s) will be provided by the Office upon request and payment of the necessary fee.

37 C.F.R. § 1.85 Corrections to drawings.

(a) A utility or plant application will not be placed on the files for examination until objections to the drawings have been corrected. Except as provided in § 1.215(c), any patent application publication will not include drawings filed after the application has been placed on the files for examination. Unless applicant is otherwise notified in an Office action, objections to the drawings in a utility or plant application will not be held in abeyance, and a request to hold objections to the drawings in abeyance will not be considered a bona fide attempt to advance the application to final action (§ 1.135(c)). If a drawing in a design application meets the requirements of § 1.84(e), (f), and (g) and is suitable for reproduction, but is not otherwise in compliance with § 1.84, the drawing may be admitted for examination. (b) The Office will not release drawings for purposes of correction. If corrections are necessary, new corrected drawings must be submitted within the time set by the Office. (c) If a corrected drawing is required or if a drawing does not comply with § 1.84 or an amended drawing submitted under § 1.121(d) in a nonprovisional international design application does not comply with § 1.1026 at the time an application is allowed, the Office may notify the applicant in a notice of allowability and set a three-month period of time from the mail date of the notice of allowability within which the applicant must file a corrected drawing in compliance with § 1.84 or 1.1026, as applicable, to avoid abandonment. This time period is not extendable under § 1.136 (see § 1.136(c)).

37 C.F.R. § 1.311 Notice of allowance.

(a) If, on examination, it appears that the applicant is entitled to a patent under the law, a notice of allowance will be sent to the applicant at the correspondence address indicated in § 1.33. The notice of allowance shall specify a sum constituting the issue fee and any required publication fee (§ 1.211(e)), which issue fee and any required publication fee must both be paid within three months from the date of mailing of the notice of allowance to avoid abandonment of the application. This three-month period is not extendable. (b) An authorization to charge the issue fee or other post-allowance fees set forth in § 1.18 to a deposit account may be filed in an individual application only after mailing of the notice of allowance. The submission of either of the following after the mailing of a notice of allowance will operate as a request to charge the correct issue fee or any publication fee due to any deposit account identified in a previously filed authorization to charge such fees: (1) An incorrect issue fee or publication fee; or (2) A fee transmittal form (or letter) for payment of issue fee or publication fee.

37 C.F.R. § 1.312 Amendments after allowance.

No amendment may be made as a matter of right in an application after the mailing of the notice of allowance. Any amendment filed pursuant to this section must be filed before or with the payment of the issue fee, and may be entered on the recommendation of the primary examiner, approved by the Director, without withdrawing the application from issue.

37 C.F.R. § 1.313 Withdrawal from issue.

(a) Applications may be withdrawn from issue for further action at the initiative of the Office or upon petition by the applicant. To request that the Office withdraw an application from issue, applicant must file a petition under this section including the fee set forth in § 1.17(h) and a showing of good and sufficient reasons why withdrawal of the application from issue is necessary. A petition under this section is not required if a request for continued examination under § 1.114 is filed prior to payment of the issue fee. If the Office withdraws the application from issue, the Office will issue a new notice of allowance if the Office again allows the application. (b) Once the issue fee has been paid, the Office will not withdraw the application from issue at its own initiative for any reason except: (1) A mistake on the part of the Office; (2) A violation of § 1.56 or illegality in the application; (3) Unpatentability of one or more claims; or (4) For an interference or derivation proceeding. (c) Once the issue fee has been paid, the application will not be withdrawn from issue upon petition by the applicant for any reason except: (1) Unpatentability of one of more claims, which petition must be accompanied by an unequivocal statement that one or more claims are unpatentable, an amendment to such claim or claims, and an explanation as to how the amendment causes such claim or claims to be patentable; (2) Consideration of a request for continued examination in compliance with § 1.114; or (3) Express abandonment of the application. Such express abandonment may be in favor of a continuing application. (d) A petition under this section will not be effective to withdraw the application from issue unless it is actually received and granted by the appropriate officials before the date of issue. Withdrawal of an application from issue after payment of the issue fee may not be effective to avoid publication of application information.

37 C.F.R. § 1.314 Issuance of patent.

If applicant timely pays the issue fee, the Office will issue the patent in regular course unless the application is withdrawn from issue (§ 1.313) or the Office defers issuance of the patent. To request that the Office defer issuance of a patent, applicant must file a petition under this section including the fee set forth in § 1.17(h) and a showing of good and sufficient reasons why it is necessary to defer issuance of the patent.

37 C.F.R. § 1.316 Application abandoned for failure to pay issue fee.

If the issue fee is not paid within three months from the date of the notice of allowance, the application will be regarded as abandoned. Such an abandoned application will not be considered as pending before the Patent and Trademark Office.

37 C.F.R. § 1.51 General requisites of an application.

(a) Applications for patents must be made to the Director of the United States Patent and Trademark Office. An application transmittal letter limited to the transmittal of the documents and fees comprising a patent application under this section may be signed by a juristic applicant or patent owner. (b) A complete application filed under § 1.53(b) or § 1.53(d) comprises: (1) A specification as prescribed by 35 U.S.C. 112, including a claim or claims, see §§ 1.71 to 1.77; (2) The inventor's oath or declaration, see §§ 1.63 and 1.64; (3) Drawings, when necessary, see §§ 1.81 to 1.85; and (4) The prescribed filing fee, search fee, examination fee, and application size fee, see § 1.16. (c) A complete provisional application filed under § 1.53(c) comprises: (1) A cover sheet identifying: (i) The application as a provisional application, (ii) The name or names of the inventor or inventors, (see § 1.41(a)(2)), (iii) The residence of each named inventor, (iv) The title of the invention, (v) The name and registration number of the attorney or agent (if applicable), (vi) The docket number used by the person filing the application to identify the application (if applicable), (vii) The correspondence address, and (viii) The name of the U.S. Government agency and Government contract number (if the invention was made by an agency of the U.S. Government or under a contract with an agency of the U.S. Government); (2) A specification as prescribed by 35 U.S.C. 112(a), see § 1.71; (3) Drawings, when necessary, see §§ 1.81 to 1.85; and (4) The prescribed filing fee and application size fee, see § 1.16. (d) Applicants are encouraged to file an information disclosure statement in nonprovisional applications. See § 1.97 and § 1.98. No information disclosure statement may be filed in a provisional application.

37 C.F.R. § 1.52 Language, paper, writing, margins, read-only optical disc specifications.

(a) Papers that are to become a part of the permanent United States Patent and Trademark Office records in the file of a patent application, or a reexamination or supplemental examination proceeding. (1) All papers, other than drawings, that are submitted on paper or by facsimile transmission, and are to become a part of the permanent United States Patent and Trademark Office records in the file of a patent application or reexamination or supplemental examination proceeding, must be on sheets of paper that are the same size, not permanently bound together, and: (i) Flexible, strong, smooth, non-shiny, durable, and white; (ii) Either 21.0 cm by 29.7 cm (DIN size A4) or 21.6 cm by 27.9 cm (8 1/2 by 11 inches), with each sheet including a top margin of at least 2.0 cm ( 3/4 inch), a left side margin of at least 2.5 cm (1 inch), a right side margin of at least 2.0 cm ( 3/4 inch), and a bottom margin of at least 2.0 cm ( 3/4 inch); (iii) Written on only one side in portrait orientation; (iv) Plainly and legibly written either by a typewriter or machine printer in permanent dark ink or its equivalent; and (v) Presented in a form having sufficient clarity and contrast between the paper and the writing thereon to permit the direct reproduction of readily legible copies in any number by use of photographic, electrostatic, photo-offset, and microfilming processes and electronic capture by use of digital imaging and optical character recognition. (2) All papers that are submitted on paper or by facsimile transmission and are to become a part of the permanent records of the United States Patent and Trademark Office should have no holes in the sheets as submitted. (3) The provisions of this paragraph and paragraph (b) of this section do not apply to the pre-printed information on paper forms provided by the Office, or to the copy of the patent submitted on paper in double column format as the specification in a reissue application or request for reexamination. (4) See § 1.58 for chemical and mathematical formulae and tables, and § 1.84 for drawings. (5) Papers that are submitted electronically to the Office must be formatted and transmitted in compliance with the USPTO patent electronic filing system requirements. (b) The application (specification, including the claims, drawings, and the inventor's oath or declaration) or reexamination or supplemental examination proceeding, any amendments to the application or reexamination proceeding, or any corrections to the application, or reexamination or supplemental examination proceeding. (1) The application or proceeding and any amendments or corrections to the application (including any translation submitted pursuant to paragraph (d) of this section) or proceeding, except as provided for in § 1.69 and paragraph (d) of this section, must: (i) Comply with the requirements of paragraph (a) of this section; and (ii) Be in the English language or be accompanied by a translation of the application and a translation of any corrections or amendments into the English language together with a statement that the translation is accurate. (2) The specification (including the abstract and claims) for other than reissue applications and reexamination or supplemental examination proceedings, and any amendments for applications (including reissue applications) and reexamination proceedings to the specification, except as provided for in §§ 1.821 through 1.825, must have: (i) Lines that are 1 1/2 or double spaced; (ii) Text written in a nonscript type font (e.g., Arial, Times Roman, or Courier, preferably a font size of 12) lettering style having capital letters which should be at least 0.3175 cm. (0.125 inch) high, but may be no smaller than 0.21 cm. (0.08 inch) high (e.g., a font size of 6); and (iii) Only a single column of text. (3) The claim or claims must commence on a separate physical sheet or electronic page (§ 1.75(h)). (4) The abstract must commence on a separate physical sheet or electronic page or be submitted as the first page of the patent in a reissue application or reexamination or supplemental examination proceeding (§ 1.72(b)). (5) Other than in a reissue application or a reexamination or supplemental examination proceeding, the pages of the specification including claims and abstract must be numbered consecutively, starting with 1, the numbers being centrally located above or preferably, below, the text. (6) Other than in a reissue application or reexamination or supplemental examination proceeding, the paragraphs of the specification, other than in the claims or abstract, may be numbered at the time the application is filed, and should be individually and consecutively numbered using Arabic numerals, so as to unambiguously identify each paragraph. The number should consist of at least four numerals enclosed in square brackets, including leading zeros (e.g., [0001]). The numbers and enclosing brackets should appear to the right of the left margin as the first item in each paragraph, before the first word of the paragraph, and should be highlighted in bold. A gap, equivalent to approximately four spaces, should follow the number. Nontext elements (e.g., tables, mathematical or chemical formulae, chemical structures, and sequence data) are considered part of the numbered paragraph around or above the elements, and should not be independently numbered. If a nontext element extends to the left margin, it should not be numbered as a separate and independent paragraph. A list is also treated as part of the paragraph around or above the list, and should not be independently numbered. Paragraph or section headers (titles), whether abutting the left margin or centered on the page, are not considered paragraphs and should not be numbered. (c) Interlineation, erasure, cancellation, or other alteration of the application papers may be made before or after the signing of the inventor's oath or declaration referring to those application papers, provided that the statements in the inventor's oath or declaration pursuant to § 1.63 remain applicable to those application papers. A substitute specification (§ 1.125) may be required if the application papers do not comply with paragraphs (a) and (b) of this section. (d) A nonprovisional or provisional application under 35 U.S.C. 111 may be in a language other than English. (1) Nonprovisional application. If a nonprovisional application under 35 U.S.C. 111(a) is filed in a language other than English, an English language translation of the non-English language application, a statement that the translation is accurate, and the processing fee set forth in § 1.17(i) are required. If these items are not filed with the application, the applicant will be notified and given a period of time within which they must be filed in order to avoid abandonment. (2) Provisional application. If a provisional application under 35 U.S.C. 111(b) is filed in a language other than English, an English language translation of the non-English language provisional application will not be required in the provisional application. See § 1.78(a) for the requirements for claiming the benefit of such provisional application in a nonprovisional application. (e) Electronic documents submitted on a read-only optical disc that are to become part of the permanent United States Patent and Trademark Office records in the file of a patent application, reexamination, or supplemental examination proceeding. (1) The following documents may be submitted to the Office on a read-only optical disc in compliance with this paragraph (e): (i) A “Computer Program Listing Appendix” (see § 1.96(c)); (ii) A “Sequence Listing” (submitted under § 1.821(c) in compliance with §§ 1.822 through 1.824) or a “Sequence Listing XML” (submitted under § 1.831(a) in compliance with §§ 1.832 through 1.834); or (iii) “Large Tables” (see § 1.58(c)). (2) Read-only optical disc as used in this part means a finalized disc, in conformance with International Organization for Standardization (ISO) 9660, on which the data is recorded so it is permanent and cannot be changed or erased, and is one of: (i) Compact Disc-Read-Only Memory (CD-ROM) or a Compact Disc-Recordable (CD-R); or (ii) Digital Video Disc-Recordable (DVD-R or DVD+R); (3) Each read-only optical disc must conform to the following requirements: (i) Computer compatibility: PC or Mac®; (ii) Operating system compatibility: MS-DOS®, MS-Windows®, MacOS®, or Unix®/Linux®; (iii) The contents of each read-only optical disc must be in American Standard Code for Information Interchange (ASCII) plain text and if compressed, must be compressed in accordance with § 1.58 for “Large Tables,” with § 1.96 for a “Computer Program Listing Appendix,” or § 1.824 for a “Sequence Listing” or Computer Readable Form (CRF) of the “Sequence Listing,” as applicable; and (iv) The contents of each read-only optical disc for a “Sequence Listing XML” must be in eXtensible Markup Language (XML) file format, and if compressed, must be compressed in accordance with § 1.834. (4) Each read-only optical disc must be enclosed in a hard case within an unsealed, padded, and protective mailing envelope, and must be accompanied by a transmittal letter in accordance with paragraph (a) of this section, including the following information: (i) First-named inventor (if known); (ii) Title of the invention; (iii) Attorney docket or file reference number (if applicable); (iv) Application number and filing date (if known); (v) The operating system (MS-DOS®, MS-Windows®, Mac OS®, or Unix®/Linux®) used to produce the disc; and (vi) The file(s) contained on the read-only optical disc, including the name of the file, the size of the file in bytes, and the date of creation. (5) Each read-only optical disc must have a label permanently affixed thereto on which the following information has been hand-printed or typed: (i) First-named inventor (if known); (ii) Title of the invention; (iii) Attorney docket or file reference number (if applicable); (iv) Application number and filing date (if known); (v) Date on which the data were recorded on the read-only optical disc; and (vi) Disc order (e.g., “1 of X”), if multiple read-only optical discs are submitted. (6) Read-only optical discs will not be returned to the applicant and may not be retained as part of the patent application file. (7) Any amendment to the information on a read-only optical disc must be by way of a replacement read-only optical disc, in compliance with § 1.58(g) for “Large Tables,” § 1.96(c)(5) for a “Computer Program Listing Appendix,” § 1.825(b) for a “Sequence Listing” or CRF of a “Sequence Listing,” and § 1.835(b) for a “Sequence Listing XML.” (8) The specification must contain an incorporation by reference of the material on each read-only optical disc in a separate paragraph (§ 1.77(b)(5)), identifying the name of each file, their date of creation, and their size in bytes, except for an international application in the international stage. The Office may require the applicant to amend the specification to include the material incorporated by reference. (9) If a file is unreadable, it will be treated as not having been submitted, and a notice will be issued to require a compliant submission. (f) Determining application size fees for applications containing electronic documents submitted on a read-only optical disc or via the USPTO patent electronic filing system— (1) Submission on read-only optical discs. The application size fee required by § 1.16(s) or § 1.492(j), for an application component submitted in part on a read-only optical disc in compliance with paragraph (e) of this section, shall be determined such that each three kilobytes of content submitted on a read-only optical disc shall be counted as a sheet of paper. Excluded from this determination is any ASCII plain text file or any XML file (as applicable) submitted on a read-only optical disc under paragraph (e) of this section containing: (i) Any “Sequence Listing” or CRF of a “Sequence Listing” in compliance with § 1.821(c) or (e), or any “Sequence Listing XML” in compliance with § 1.831(a); or (ii) Any “Computer Program Listing Appendix” in compliance with § 1.96(c). (2) Submission via the USPTO patent electronic filing system. The application size fee required by § 1.16(s) or § 1.492(j), for an application submitted in whole or in part via the USPTO patent electronic filing system, shall be determined such that the paper size equivalent will be considered to be 75% of the number of sheets of paper present in the specification and drawings for the application when entered into the Office records after being rendered by the USPTO patent electronic filing system. Excluded from this determination is any ASCII plain text file or any XML file (as applicable) submitted via the USPTO patent electronic filing system containing: (i) Any “Sequence Listing” or CRF of a “Sequence Listing” in compliance with § 1.821(c)(1) or (e), or any “Sequence Listing XML” in compliance with § 1.831(a); or (ii) Any “Computer Program Listing Appendix” in compliance with § 1.96(c). (3) Oversized submission. Any submission of a “Sequence Listing” in electronic form or a “Sequence Listing XML” of 300 MB-800 MB filed in an application under 35 U.S.C. 111 or 371 will be subject to the fee set forth in § 1.21(o)(1). Any submission of a “Sequence Listing” in electronic form or a “Sequence Listing XML” that exceeds 800 MB filed in an application under 35 U.S.C. 111 or 371 will be subject to the fee set forth in § 1.21(o)(2).

37 C.F.R. § 1.53 Application number, filing date, and completion of application.

(a) Application number. Any papers received in the Patent and Trademark Office which purport to be an application for a patent will be assigned an application number for identification purposes. (b) Application filing requirements—Nonprovisional application. The filing date of an application for patent filed under this section, other than an application for a design patent or a provisional application under paragraph (c) of this section, is the date on which a specification, with or without claims, is received in the Office. The filing date of an application for a design patent filed under this section, except for a continued prosecution application under paragraph (d) of this section, is the date on which the specification as prescribed by 35 U.S.C. 112, including at least one claim, and any required drawings are received in the Office. No new matter may be introduced into an application after its filing date. A continuing application, which may be a continuation, divisional, or continuation-in-part application, may be filed under the conditions specified in 35 U.S.C. 120, 121, 365(c), or 386(c) and § 1.78. (1) A continuation or divisional application that names as inventors the same or fewer than all of the inventors named in the prior application may be filed under this paragraph or paragraph (d) of this section. (2) A continuation-in-part application (which may disclose and claim subject matter not disclosed in the prior application) or a continuation or divisional application naming an inventor not named in the prior application must be filed under this paragraph. (c) Application filing requirements—Provisional application. The filing date of a provisional application is the date on which a specification, with or without claims, is received in the Office. No amendment, other than to make the provisional application comply with the patent statute and all applicable regulations, may be made to the provisional application after the filing date of the provisional application. (1) A provisional application must also include the cover sheet required by § 1.51(c)(1), which may be an application data sheet (§ 1.76), or a cover letter identifying the application as a provisional application. Otherwise, the application will be treated as an application filed under paragraph (b) of this section. (2) An application for patent filed under paragraph (b) of this section may be converted to a provisional application and be accorded the original filing date of the application filed under paragraph (b) of this section. The grant of such a request for conversion will not entitle applicant to a refund of the fees that were properly paid in the application filed under paragraph (b) of this section. Such a request for conversion must be accompanied by the processing fee set forth in § 1.17(q) and be filed prior to the earliest of: (i) Abandonment of the application filed under paragraph (b) of this section; (ii) Payment of the issue fee on the application filed under paragraph (b) of this section; or (iii) Expiration of twelve months after the filing date of the application filed under paragraph (b) of this section. (3) A provisional application filed under paragraph (c) of this section may be converted to a nonprovisional application filed under paragraph (b) of this section and accorded the original filing date of the provisional application. The conversion of a provisional application to a nonprovisional application will not result in either the refund of any fee properly paid in the provisional application or the application of any such fee to the filing fee, or any other fee, for the nonprovisional application. Conversion of a provisional application to a nonprovisional application under this paragraph will result in the term of any patent to issue from the application being measured from at least the filing date of the provisional application for which conversion is requested. Thus, applicants should consider avoiding this adverse patent term impact by filing a nonprovisional application claiming the benefit of the provisional application under 35 U.S.C. 119(e), rather than converting the provisional application into a nonprovisional application pursuant to this paragraph. A request to convert a provisional application to a nonprovisional application must be accompanied by the fee set forth in § 1.17(i) and an amendment including at least one claim as prescribed by 35 U.S.C. 112(b), unless the provisional application under paragraph (c) of this section otherwise contains at least one claim as prescribed by 35 U.S.C. 112(b). The nonprovisional application resulting from conversion of a provisional application must also include the filing fee, search fee, and examination fee for a nonprovisional application, and the surcharge required by § 1.16(f) if either the basic filing fee for a nonprovisional application or the inventor's oath or declaration was not present on the filing date accorded the resulting nonprovisional application (i.e., the filing date of the original provisional application). A request to convert a provisional application to a nonprovisional application must also be filed prior to the earliest of: (i) Abandonment of the provisional application filed under paragraph (c) of this section; or (ii) Expiration of twelve months after the filing date of the provisional application filed under paragraph (c) of this section. (4) A provisional application is not entitled to the right of priority under 35 U.S.C. 119, 365(a), or 386(a) or § 1.55, or to the benefit of an earlier filing date under 35 U.S.C. 120, 121, 365(c), or 386(c) or § 1.78 of any other application. No claim for priority under 35 U.S.C. 119(e) or § 1.78(a) may be made in a design application based on a provisional application. A provisional application disclosing nucleotide and/or amino acid sequences is not required to include a separate sequence listing; however, if submitted in a provisional application filed on or after July 1, 2022, any submission of nucleotide and/or amino acid sequence data must be by way of a “Sequence Listing XML” in compliance with §§ 1.831 through 1.834. (d) Application filing requirements—Continued prosecution (nonprovisional) application. (1) A continuation or divisional application (but not a continuation-in-part) of a prior nonprovisional application may be filed as a continued prosecution application under this paragraph, provided that: (i) The application is for a design patent; (ii) The prior nonprovisional application is a design application, but not an international design application, that is complete as defined by § 1.51(b), except for the inventor's oath or declaration if the application is filed on or after September 16, 2012, and the prior nonprovisional application contains an application data sheet meeting the conditions specified in § 1.53(f)(3)(i); and (iii) The application under this paragraph is filed before the earliest of: (A) Payment of the issue fee on the prior application, unless a petition under § 1.313(c) is granted in the prior application; (B) Abandonment of the prior application; or (C) Termination of proceedings on the prior application. (2) The filing date of a continued prosecution application is the date on which a request on a separate paper for an application under this paragraph is filed. An application filed under this paragraph: (i) Must identify the prior application; (ii) Discloses and claims only subject matter disclosed in the prior application; (iii) Names as inventors the same inventors named in the prior application on the date the application under this paragraph was filed, except as provided in paragraph (d)(4) of this section; (iv) Includes the request for an application under this paragraph, will utilize the file jacket and contents of the prior application, including the specification, drawings and the inventor's oath or declaration from the prior application, to constitute the new application, and will be assigned the application number of the prior application for identification purposes; and (v) Is a request to expressly abandon the prior application as of the filing date of the request for an application under this paragraph. (3) The filing fee, search fee, and examination fee for a continued prosecution application filed under this paragraph are the basic filing fee as set forth in § 1.16(b), the search fee as set forth in § 1.16(l), and the examination fee as set forth in § 1.16(p). (4) An application filed under this paragraph may be filed by fewer than all the inventors named in the prior application, provided that the request for an application under this paragraph when filed is accompanied by a statement requesting deletion of the name or names of the person or persons who are not inventors of the invention being claimed in the new application. No person may be named as an inventor in an application filed under this paragraph who was not named as an inventor in the prior application on the date the application under this paragraph was filed, except by way of correction of inventorship under § 1.48. (5) Any new change must be made in the form of an amendment to the prior application as it existed prior to the filing of an application under this paragraph. No amendment in an application under this paragraph (a continued prosecution application) may introduce new matter or matter that would have been new matter in the prior application. Any new specification filed with the request for an application under this paragraph will not be considered part of the original application papers, but will be treated as a substitute specification in accordance with § 1.125. (6) The filing of a continued prosecution application under this paragraph will be construed to include a waiver of confidentiality by the applicant under 35 U.S.C. 122 to the extent that any member of the public, who is entitled under the provisions of § 1.14 to access to, copies of, or information concerning either the prior application or any continuing application filed under the provisions of this paragraph, may be given similar access to, copies of, or similar information concerning the other application or applications in the file jacket. (7) A request for an application under this paragraph is the specific reference required by 35 U.S.C. 120 to every application assigned the application number identified in such request. No amendment in an application under this paragraph may delete this specific reference to any prior application. (8) In addition to identifying the application number of the prior application, applicant should furnish in the request for an application under this paragraph the following information relating to the prior application to the best of his or her ability: (i) Title of invention; (ii) Name of applicant(s); and (iii) Correspondence address. (9) See § 1.103(b) for requesting a limited suspension of action in an application filed under this paragraph. (e) Failure to meet filing date requirements. (1) If an application deposited under paragraph (b), (c), or (d) of this section does not meet the requirements of such paragraph to be entitled to a filing date, applicant will be so notified, if a correspondence address has been provided, and given a period of time within which to correct the filing error. If, however, a request for an application under paragraph (d) of this section does not meet the requirements of that paragraph because the application in which the request was filed is not a design application, and if the application in which the request was filed was itself filed on or after June 8, 1995, the request for an application under paragraph (d) of this section will be treated as a request for continued examination under § 1.114. (2) Any request for review of a notification pursuant to paragraph (e)(1) of this section, or a notification that the original application papers lack a portion of the specification or drawing(s), must be by way of a petition pursuant to this paragraph accompanied by the fee set forth in § 1.17(f). In the absence of a timely (§ 1.181(f)) petition pursuant to this paragraph, the filing date of an application in which the applicant was notified of a filing error pursuant to paragraph (e)(1) of this section will be the date the filing error is corrected. (3) If an applicant is notified of a filing error pursuant to paragraph (e)(1) of this section, but fails to correct the filing error within the given time period or otherwise timely (§ 1.181(f)) take action pursuant to this paragraph, proceedings in the application will be considered terminated. Where proceedings in an application are terminated pursuant to this paragraph, the application may be disposed of, and any filing fees, less the handling fee set forth in § 1.21(n), will be refunded. (f) Completion of application subsequent to filing—Nonprovisional (including continued prosecution or reissue) application. (1) If an application which has been accorded a filing date pursuant to paragraph (b) or (d) of this section does not include the basic filing fee, search fee, or examination fee, or if an application which has been accorded a filing date pursuant to paragraph (b) of this section does not include at least one claim or the inventor's oath or declaration (§§ 1.63, 1.64, 1.162, or 1.175), and the applicant has provided a correspondence address (§ 1.33(a)), the applicant will be notified and given a period of time within which to file a claim or claims, pay the basic filing fee, search fee, and examination fee, and pay the surcharge if required by § 1.16(f), to avoid abandonment. (2) If an application which has been accorded a filing date pursuant to paragraph (b) of this section does not include the basic filing fee, search fee, examination fee, at least one claim, or the inventor's oath or declaration, and the applicant has not provided a correspondence address (§ 1.33(a)), the applicant has three months from the filing date of the application within which to file a claim or claims, pay the basic filing fee, search fee, and examination fee, and pay the surcharge required by § 1.16(f), to avoid abandonment. (3) The inventor's oath or declaration in an application under § 1.53(b) must also be filed within the period specified in paragraph (f)(1) or (f)(2) of this section, except that the filing of the inventor's oath or declaration may be postponed until the application is otherwise in condition for allowance under the conditions specified in paragraphs (f)(3)(i) and (f)(3)(ii) of this section. (i) The application must be an original (non-reissue) application that contains an application data sheet in accordance with § 1.76 identifying: (A) Each inventor by his or her legal name; (B) A mailing address where the inventor customarily receives mail, and residence, if an inventor lives at a location which is different from where the inventor customarily receives mail, for each inventor. (ii) The applicant must file each required oath or declaration in compliance with § 1.63, or substitute statement in compliance with § 1.64, no later than the date on which the issue fee for the patent is paid. If the applicant is notified in a notice of allowability that an oath or declaration in compliance with § 1.63, or substitute statement in compliance with § 1.64, executed by or with respect to each named inventor has not been filed, the applicant must file each required oath or declaration in compliance with § 1.63, or substitute statement in compliance with § 1.64, no later than the date on which the issue fee is paid to avoid abandonment. This time period is not extendable under § 1.136 (see § 1.136(c)). The Office may dispense with the notice provided for in paragraph (f)(1) of this section if each required oath or declaration in compliance with § 1.63, or substitute statement in compliance with § 1.64, has been filed before the application is in condition for allowance. (4) If the excess claims fees required by § 1.16(h) and (i) and multiple dependent claim fee required by § 1.16(j) are not paid on filing or on later presentation of the claims for which the excess claims or multiple dependent claim fees are due, the fees required by § 1.16(h), (i), and (j) must be paid or the claims canceled by amendment prior to the expiration of the time period set for reply by the Office in any notice of fee deficiency. If the application size fee required by § 1.16(s) (if any) is not paid on filing or on later presentation of the amendment necessitating a fee or additional fee under § 1.16(s), the fee required by § 1.16(s) must be paid prior to the expiration of the time period set for reply by the Office in any notice of fee deficiency in order to avoid abandonment. (5) This paragraph applies to continuation or divisional applications under paragraphs (b) or (d) of this section and to continuation-in-part applications under paragraph (b) of this section. See § 1.63(d) concerning the submission of a copy of the inventor's oath or declaration from the prior application for a continuing application under paragraph (b) of this section. (6) If applicant does not pay the basic filing fee during the pendency of the application, the Office may dispose of the application. (g) Completion of application subsequent to filing—Provisional application. (1) If a provisional application which has been accorded a filing date pursuant to paragraph (c) of this section does not include the cover sheet required by § 1.51(c)(1) or the basic filing fee (§ 1.16(d)), and applicant has provided a correspondence address (§ 1.33(a)), applicant will be notified and given a period of time within which to pay the basic filing fee, file a cover sheet (§ 1.51(c)(1)), and pay the surcharge required by § 1.16(g) to avoid abandonment. (2) If a provisional application which has been accorded a filing date pursuant to paragraph (c) of this section does not include the cover sheet required by § 1.51(c)(1) or the basic filing fee (§ 1.16(d)), and applicant has not provided a correspondence address (§ 1.33(a)), applicant has two months from the filing date of the application within which to pay the basic filing fee, file a cover sheet (§ 1.51(c)(1)), and pay the surcharge required by § 1.16(g) to avoid abandonment. (3) If the application size fee required by § 1.16(s) (if any) is not paid on filing, the fee required by § 1.16(s) must be paid prior to the expiration of the time period set for reply by the Office in any notice of fee deficiency in order to avoid abandonment. (4) If applicant does not pay the basic filing fee during the pendency of the application, the Office may dispose of the application. (h) Subsequent treatment of application—Nonprovisional (including continued prosecution) application. An application for a patent filed under paragraphs (b) or (d) of this section will not be placed on the files for examination until all its required parts, complying with the rules relating thereto, are received, except that the inventor's oath or declaration may be filed when the application is otherwise in condition for allowance pursuant to paragraph (f)(3) of this section and minor informalities may be waived subject to subsequent correction whenever required. (i) Subsequent treatment of application—Provisional application. A provisional application for a patent filed under paragraph (c) of this section will not be placed on the files for examination and will become abandoned no later than twelve months after its filing date pursuant to 35 U.S.C. 111(b)(1).

37 C.F.R. § 1.54 Parts of application to be filed together; filing receipt.

(a) It is desirable that all parts of the complete application be deposited in the Office together; otherwise, a letter must accompany each part, accurately and clearly connecting it with the other parts of the application. See § 1.53 (f) and (g) with regard to completion of an application. (b) Applicant will be informed of the application number and filing date by a filing receipt, unless the application is an application filed under § 1.53(d). A letter limited to a request for a filing receipt may be signed by a juristic applicant or patent owner.

37 C.F.R. § 1.55 Claim for foreign priority.

(a) In general. An applicant in a nonprovisional application may claim priority to one or more prior foreign applications under the conditions specified in 35 U.S.C. 119(a) through (d) and (f), 172, 365(a) and (b), and 386(a) and (b) and this section. (b) Time for filing subsequent application. The nonprovisional application must be: (1) Filed not later than twelve months (six months in the case of a design application) after the date on which the foreign application was filed, subject to paragraph (c) of this section (a subsequent application); or (2) Entitled to claim the benefit under 35 U.S.C. 120, 121, 365(c), or 386(c) of a subsequent application that was filed within the period set forth in paragraph (b)(1) of this section. (c) Delayed filing of subsequent application. If the subsequent application has a filing date which is after the expiration of the period set forth in paragraph (b)(1) of this section, but within two months from the expiration of the period set forth in paragraph (b)(1) of this section, the right of priority in the subsequent application may be restored under PCT Rule 26bis.3 for an international application, or upon petition pursuant to this paragraph, if the delay in filing the subsequent application within the period set forth in paragraph (b)(1) of this section was unintentional. A petition to restore the right of priority under this paragraph filed on or after May 13, 2015, must be filed in the subsequent application, or in the earliest nonprovisional application claiming benefit under 35 U.S.C. 120, 121, 365(c), or 386(c) to the subsequent application, if such subsequent application is not a nonprovisional application. Any petition to restore the right of priority under this paragraph must include: (1) The priority claim under 35 U.S.C. 119(a) through (d) or (f), 365(a) or (b), or 386(a) or (b) in an application data sheet (§ 1.76(b)(6)), identifying the foreign application to which priority is claimed, by specifying the application number, country (or intellectual property authority), day, month, and year of its filing, unless previously submitted; (2) The petition fee as set forth in § 1.17(m); and (3) A statement that the delay in filing the subsequent application within the period set forth in paragraph (b)(1) of this section was unintentional. The Director may require additional information where there is a question whether the delay was unintentional. (d) Time for filing priority claim—(1) Application under 35 U.S.C. 111(a). The claim for priority must be filed within the later of four months from the actual filing date of the application or sixteen months from the filing date of the prior foreign application in an original application filed under 35 U.S.C. 111(a), except as provided in paragraph (e) of this section. The claim for priority must be presented in an application data sheet (§ 1.76(b)(6)) and must identify the foreign application to which priority is claimed by specifying the application number, country (or intellectual property authority), day, month, and year of its filing. The time periods in this paragraph do not apply if the later-filed application is: (i) An application for a design patent; or (ii) An application filed under 35 U.S.C. 111(a) before November 29, 2000. (2) Application under 35 U.S.C. 371. The claim for priority must be made within the time limit set forth in the PCT and the Regulations under the PCT in an international application entering the national stage under 35 U.S.C. 371, except as provided in paragraph (e) of this section. (e) Delayed priority claim. Unless such claim is accepted in accordance with the provisions of this paragraph, any claim for priority under 35 U.S.C. 119(a) through (d) or (f), 365(a) or (b), or 386(a) or 386(b) not presented in the manner required by paragraph (d) or (m) of this section during pendency and within the time period provided by paragraph (d) of this section (if applicable) is considered to have been waived. If a claim for priority is considered to have been waived under this section, the claim may be accepted if the priority claim was unintentionally delayed. A petition to accept a delayed claim for priority under 35 U.S.C. 119(a) through (d) or (f), 365(a) or (b), or 386(a) or 386(b) must be accompanied by: (1) The priority claim under 35 U.S.C. 119(a) through (d) or (f), 365(a) or (b), or 386(a) or 386(b) in an application data sheet (§ 1.76(b)(6)), identifying the foreign application to which priority is claimed, by specifying the application number, country (or intellectual property authority), day, month, and year of its filing, unless previously submitted; (2) A certified copy of the foreign application, unless previously submitted or an exception in paragraph (h), (i), or (j) of this section applies; (3) The petition fee as set forth in § 1.17(m); and (4) A statement that the entire delay between the date the priority claim was due under this section and the date the priority claim was filed was unintentional. The Director may require additional information where there is a question whether the delay was unintentional. (f) Time for filing certified copy of foreign application—(1) Application under 35 U.S.C. 111(a). A certified copy of the foreign application must be filed within the later of four months from the actual filing date of the application, or sixteen months from the filing date of the prior foreign application, in an original application under 35 U.S.C. 111(a) filed on or after March 16, 2013, except as provided in paragraphs (h), (i), and (j) of this section. The time period in this paragraph does not apply in a design application. (2) Application under 35 U.S.C. 371. A certified copy of the foreign application must be filed within the time limit set forth in the PCT and the Regulations under the PCT in an international application entering the national stage under 35 U.S.C. 371. If a certified copy of the foreign application is not filed during the international stage in an international application in which the national stage commenced on or after December 18, 2013, a certified copy of the foreign application must be filed within the later of four months from the date on which the national stage commenced under 35 U.S.C. 371(b) or (f) (§ 1.491(a)), four months from the date of the initial submission under 35 U.S.C. 371 to enter the national stage, or sixteen months from the filing date of the prior foreign application, except as provided in paragraphs (h), (i), and (j) of this section. (3) If a certified copy of the foreign application is not filed within the time period specified paragraph (f)(1) of this section in an application under 35 U.S.C. 111(a) or within the period specified in paragraph (f)(2) of this section in an international application entering the national stage under 35 U.S.C. 371, and an exception in paragraph (h), (i), or (j) of this section is not applicable, the certified copy of the foreign application must be accompanied by a petition including a showing of good and sufficient cause for the delay and the petition fee set forth in § 1.17(g). (g) Requirement for filing priority claim, certified copy of foreign application, and translation in any application. (1) The claim for priority and the certified copy of the foreign application specified in 35 U.S.C. 119(b) or PCT Rule 17 must, in any event, be filed within the pendency of the application, unless filed with a petition under paragraph (e) or (f) of this section, or with a petition accompanied by the fee set forth in § 1.17(g) which includes a showing of good and sufficient cause for the delay in filing the certified copy of the foreign application in a design application. If the claim for priority or the certified copy of the foreign application is filed after the date the issue fee is paid, the patent will not include the priority claim unless corrected by a certificate of correction under 35 U.S.C. 255 and § 1.323. (2) The Office may require that the claim for priority and the certified copy of the foreign application be filed earlier than otherwise provided in this section: (i) When the application is involved in an interference (see § 41.202 of this chapter) or derivation (see part 42 of this chapter) proceeding; (ii) When necessary to overcome the date of a reference relied upon by the examiner; or (iii) When deemed necessary by the examiner. (3) An English language translation of a non-English language foreign application is not required except: (i) When the application is involved in an interference (see § 41.202 of this chapter) or derivation (see part 42 of this chapter) proceeding; (ii) When necessary to overcome the date of a reference relied upon by the examiner; or (iii) When specifically required by the examiner. (4) If an English language translation of a non-English language foreign application is required, it must be filed together with a statement that the translation of the certified copy is accurate. (h) Certified copy in another U.S. patent or application. The requirement in paragraphs (f) and (g) of this section for a certified copy of the foreign application will be considered satisfied in a reissue application if the patent for which reissue is sought satisfies the requirement of this section for a certified copy of the foreign application and such patent is identified as containing a certified copy of the foreign application. The requirement in paragraphs (f) and (g) of this section for a certified copy of the foreign application will also be considered satisfied in an application if a prior-filed nonprovisional application for which a benefit is claimed under 35 U.S.C. 120, 121, 365(c), or 386(c) contains a certified copy of the foreign application and such prior-filed nonprovisional application is identified as containing a certified copy of the foreign application. (i) Foreign intellectual property office participating in a priority document exchange agreement. The requirement in paragraphs (f) and (g) of this section for a certified copy of the foreign application to be filed within the time limit set forth therein will be considered satisfied if: (1) The foreign application was filed in a foreign intellectual property office participating with the Office in a bilateral or multilateral priority document exchange agreement (participating foreign intellectual property office), or a copy of the foreign application was filed in an application subsequently filed in a participating foreign intellectual property office that permits the Office to obtain such a copy; (2) The claim for priority is presented in an application data sheet (§ 1.76(b)(6)), identifying the foreign application for which priority is claimed, by specifying the application number, country (or intellectual property authority), day, month, and year of its filing, and the applicant provides the information necessary for the participating foreign intellectual property office to provide the Office with access to the foreign application; (3) The copy of the foreign application is received by the Office from the participating foreign intellectual property office, or a certified copy of the foreign application is filed, within the period specified in paragraph (g)(1) of this section; and (4) The applicant files in a separate document a request that the Office obtain a copy of the foreign application from a participating intellectual property office that permits the Office to obtain such a copy where, although the foreign application was not filed in a participating foreign intellectual property office, a copy of the foreign application was filed in an application subsequently filed in a participating foreign intellectual property office that permits the Office to obtain such a copy. The request must identify the participating intellectual property office and the subsequent application by the application number, day, month, and year of its filing in which a copy of the foreign application was filed. The request must be filed within the later of sixteen months from the filing date of the prior foreign application, four months from the actual filing date of an application under 35 U.S.C. 111(a), four months from the date on which the national stage commenced under 35 U.S.C. 371(b) or (f) (§ 1.491(a)), or four months from the date of the initial submission under 35 U.S.C. 371 to enter the national stage, or the request must be accompanied by a petition under paragraph (e) or (f) of this section. (j) Interim copy. The requirement in paragraph (f) of this section for a certified copy of the foreign application to be filed within the time limit set forth therein will be considered satisfied if: (1) A copy of the original foreign application clearly labeled as “Interim Copy,” including the specification, and any drawings or claims upon which it is based, is filed in the Office together with a separate cover sheet identifying the foreign application by specifying the application number, country (or intellectual property authority), day, month, and year of its filing, and stating that the copy filed in the Office is a true copy of the original application as filed in the foreign country (or intellectual property authority); (2) The copy of the foreign application and separate cover sheet are filed within the later of sixteen months from the filing date of the prior foreign application, four months from the actual filing date of an application under 35 U.S.C. 111(a), four months from the date on which the national stage commenced under 35 U.S.C. 371(b) or (f) (§ 1.491(a)), four months from the date of the initial submission under 35 U.S.C. 371 to enter the national stage, or with a petition under paragraph (e) or (f) of this section; and (3) A certified copy of the foreign application is filed within the period specified in paragraph (g)(1) of this section. (k) Requirements for certain applications filed on or after March 16, 2013. If a nonprovisional application filed on or after March 16, 2013, other than a nonprovisional international design application, claims priority to a foreign application filed prior to March 16, 2013, and also contains, or contained at any time, a claim to a claimed invention that has an effective filing date as defined in § 1.109 that is on or after March 16, 2013, the applicant must provide a statement to that effect within the later of four months from the actual filing date of the nonprovisional application, four months from the date of entry into the national stage as set forth in § 1.491 in an international application, sixteen months from the filing date of the prior foreign application, or the date that a first claim to a claimed invention that has an effective filing date on or after March 16, 2013, is presented in the nonprovisional application. An applicant is not required to provide such a statement if the applicant reasonably believes on the basis of information already known to the individuals designated in § 1.56(c) that the nonprovisional application does not, and did not at any time, contain a claim to a claimed invention that has an effective filing date on or after March 16, 2013. (l) Inventor's certificates. An applicant in a nonprovisional application may under certain circumstances claim priority on the basis of one or more applications for an inventor's certificate in a country granting both inventor's certificates and patents. To claim the right of priority on the basis of an application for an inventor's certificate in such a country under 35 U.S.C. 119(d), the applicant, when submitting a claim for such right as specified in this section, must include an affidavit or declaration. The affidavit or declaration must include a specific statement that, upon an investigation, he or she is satisfied that to the best of his or her knowledge, the applicant, when filing the application for the inventor's certificate, had the option to file an application for either a patent or an inventor's certificate as to the subject matter of the identified claim or claims forming the basis for the claim of priority. (m) Time for filing priority claim and certified copy of foreign application in an international design application designating the United States. In an international design application designating the United States, the claim for priority may be made in accordance with the Hague Agreement and the Hague Agreement Regulations. In a nonprovisional international design application, the priority claim, unless made in accordance with the Hague Agreement and the Hague Agreement Regulations, must be presented in an application data sheet (§ 1.76(b)(6)), identifying the foreign application for which priority is claimed, by specifying the application number, country (or intellectual property authority), day, month, and year of its filing. In a nonprovisional international design application, the priority claim and certified copy must be furnished in accordance with the time period and other conditions set forth in paragraph (g) of this section. (n) Applications filed before September 16, 2012. Notwithstanding the requirement in paragraphs (d)(1), (e)(1), and (i)(2) of this section that any priority claim be presented in an application data sheet (§ 1.76), this requirement in paragraphs (d)(1), (e)(1), and (i)(2) of this section will be satisfied by the presentation of such priority claim in the oath or declaration under § 1.63 in a nonprovisional application filed under 35 U.S.C. 111(a) before September 16, 2012, or resulting from an international application filed under 35 U.S.C. 363 before September 16, 2012. The provisions of this paragraph do not apply to any priority claim submitted for a petition under paragraph (c) of this section to restore the right of priority to a foreign application. (o) Priority under 35 U.S.C. 386(a) or (b). The right of priority under 35 U.S.C. 386(a) or (b) with respect to an international design application is applicable only to nonprovisional applications, international applications, and international design applications filed on or after May 13, 2015, and patents issuing thereon. (p) Time periods in this section. The time periods set forth in this section are not extendable, but are subject to 35 U.S.C. 21(b) (and § 1.7(a)), PCT Rule 80.5, and Hague Agreement Rule 4(4).

37 C.F.R. § 1.56 Duty to disclose information material to patentability.

(a) A patent by its very nature is affected with a public interest. The public interest is best served, and the most effective patent examination occurs when, at the time an application is being examined, the Office is aware of and evaluates the teachings of all information material to patentability. Each individual associated with the filing and prosecution of a patent application has a duty of candor and good faith in dealing with the Office, which includes a duty to disclose to the Office all information known to that individual to be material to patentability as defined in this section. The duty to disclose information exists with respect to each pending claim until the claim is cancelled or withdrawn from consideration, or the application becomes abandoned. Information material to the patentability of a claim that is cancelled or withdrawn from consideration need not be submitted if the information is not material to the patentability of any claim remaining under consideration in the application. There is no duty to submit information which is not material to the patentability of any existing claim. The duty to disclose all information known to be material to patentability is deemed to be satisfied if all information known to be material to patentability of any claim issued in a patent was cited by the Office or submitted to the Office in the manner prescribed by §§ 1.97(b)-(d) and 1.98. However, no patent will be granted on an application in connection with which fraud on the Office was practiced or attempted or the duty of disclosure was violated through bad faith or intentional misconduct. The Office encourages applicants to carefully examine: (1) Prior art cited in search reports of a foreign patent office in a counterpart application, and (2) The closest information over which individuals associated with the filing or prosecution of a patent application believe any pending claim patentably defines, to make sure that any material information contained therein is disclosed to the Office. (b) Under this section, information is material to patentability when it is not cumulative to information already of record or being made of record in the application, and (1) It establishes, by itself or in combination with other information, a prima facie case of unpatentability of a claim; or (2) It refutes, or is inconsistent with, a position the applicant takes in: (i) Opposing an argument of unpatentability relied on by the Office, or (ii) Asserting an argument of patentability. (c) Individuals associated with the filing or prosecution of a patent application within the meaning of this section are: (1) Each inventor named in the application; (2) Each attorney or agent who prepares or prosecutes the application; and (3) Every other person who is substantively involved in the preparation or prosecution of the application and who is associated with the inventor, the applicant, an assignee, or anyone to whom there is an obligation to assign the application. (d) Individuals other than the attorney, agent or inventor may comply with this section by disclosing information to the attorney, agent, or inventor. (e) In any continuation-in-part application, the duty under this section includes the duty to disclose to the Office all information known to the person to be material to patentability, as defined in paragraph (b) of this section, which became available between the filing date of the prior application and the national or PCT international filing date of the continuation-in-part application.

37 C.F.R. § 1.57 Incorporation by reference.

(a) Subject to the conditions and requirements of this paragraph, a reference made in the English language in an application data sheet in accordance with § 1.76 upon the filing of an application under 35 U.S.C. 111(a) to a previously filed application, indicating that the specification and any drawings of the application under 35 U.S.C. 111(a) are replaced by the reference to the previously filed application, and specifying the previously filed application by application number, filing date, and the intellectual property authority or country in which the previously filed application was filed, shall constitute the specification and any drawings of the application under 35 U.S.C. 111(a) for purposes of a filing date under § 1.53(b). (1) If the applicant has provided a correspondence address (§ 1.33(a)), the applicant will be notified and given a period of time within which to file a copy of the specification and drawings from the previously filed application, an English language translation of the previously filed application, and the fee required by § 1.17(i) if it is in a language other than English, and pay the surcharge required by § 1.16(f), to avoid abandonment. Such a notice may be combined with a notice under § 1.53(f). (2) If the applicant has not provided a correspondence address (§ 1.33(a)), the applicant has three months from the filing date of the application to file a copy of the specification and drawings from the previously filed application, an English language translation of the previously filed application, and the fee required by § 1.17(i) if it is in a language other than English, and pay the surcharge required by § 1.16(f), to avoid abandonment. (3) An application abandoned under paragraph (a)(1) or (a)(2) of this section shall be treated as having never been filed, unless: (i) The application is revived under § 1.137; and (ii) A copy of the specification and any drawings of the previously filed application are filed in the Office. (4) A certified copy of the previously filed application must be filed in the Office, unless the previously filed application is an application filed under 35 U.S.C. 111 or 363, or the previously filed application is a foreign priority application and the conditions set forth in § 1.55(i) are satisfied with respect to such foreign priority application. The certified copy of the previously filed application, if required by this paragraph, must be filed within the later of four months from the filing date of the application or sixteen months from the filing date of the previously filed application, or be accompanied by a petition including a showing of good and sufficient cause for the delay and the petition fee set forth in § 1.17(g). (b) Subject to the conditions and requirements of this paragraph, if all or a portion of the specification or drawing(s) is inadvertently omitted from an application, but the application contains a claim under § 1.55 for priority of a prior-filed foreign application or a claim under § 1.78 for the benefit of a prior-filed provisional, nonprovisional, international application, or international design application, that was present on the filing date of the application, and the inadvertently omitted portion of the specification or drawing(s) is completely contained in the prior-filed application, the claim under § 1.55 or 1.78 shall also be considered an incorporation by reference of the prior-filed application as to the inadvertently omitted portion of the specification or drawing(s). (1) The application must be amended to include the inadvertently omitted portion of the specification or drawing(s) within any time period set by the Office, but in no case later than the close of prosecution as defined by § 1.114(b), or abandonment of the application, whichever occurs earlier. The applicant is also required to: (i) Supply a copy of the prior-filed application, except where the prior-filed application is an application filed under 35 U.S.C. 111; (ii) Supply an English language translation of any prior-filed application that is in a language other than English; and (iii) Identify where the inadvertently omitted portion of the specification or drawings can be found in the prior-filed application. (2) Any amendment to an international application pursuant to paragraph (b)(1) of this section shall be effective only as to the United States, and shall have no effect on the international filing date of the application. In addition, no request under this section to add the inadvertently omitted portion of the specification or drawings in an international application designating the United States will be acted upon by the Office prior to the entry and commencement of the national stage (§ 1.491) or the filing of an application under 35 U.S.C. 111(a) which claims benefit of the international application. Any omitted portion of the international application which applicant desires to be effective as to all designated States, subject to PCT Rule 20.8(b), must be submitted in accordance with PCT Rule 20. (3) If an application is not otherwise entitled to a filing date under § 1.53(b), the amendment must be by way of a petition pursuant to § 1.53(e) accompanied by the fee set forth in § 1.17(f). (4) Any amendment to an international design application pursuant to paragraph (b)(1) of this section shall be effective only as to the United States and shall have no effect on the filing date of the application. In addition, no request under this section to add the inadvertently omitted portion of the specification or drawings in an international design application will be acted upon by the Office prior to the international design application becoming a nonprovisional application. (c) Except as provided in paragraph (a) or (b) of this section, an incorporation by reference must be set forth in the specification and must: (1) Express a clear intent to incorporate by reference by using the root words “incorporat(e)” and “reference” (e.g., “incorporate by reference”); and (2) Clearly identify the referenced patent, application, or publication. (d) “Essential material” may be incorporated by reference, but only by way of an incorporation by reference to a U.S. patent or U.S. patent application publication, which patent or patent application publication does not itself incorporate such essential material by reference. “Essential material” is material that is necessary to: (1) Provide a written description of the claimed invention, and of the manner and process of making and using it, in such full, clear, concise, and exact terms as to enable any person skilled in the art to which it pertains, or with which it is most nearly connected, to make and use the same, and set forth the best mode contemplated by the inventor of carrying out the invention as required by 35 U.S.C. 112(a); (2) Describe the claimed invention in terms that particularly point out and distinctly claim the invention as required by 35 U.S.C. 112(b); or (3) Describe the structure, material, or acts that correspond to a claimed means or step for performing a specified function as required by 35 U.S.C. 112(f). (e) Other material (“Nonessential material”) may be incorporated by reference to U.S. patents, U.S. patent application publications, foreign patents, foreign published applications, prior and concurrently filed commonly owned U.S. applications, or non-patent publications. An incorporation by reference by hyperlink or other form of browser executable code is not permitted. (f) The examiner may require the applicant to supply a copy of the material incorporated by reference. If the Office requires the applicant to supply a copy of material incorporated by reference, the material must be accompanied by a statement that the copy supplied consists of the same material incorporated by reference in the referencing application. (g) Any insertion of material incorporated by reference into the specification or drawings of an application must be by way of an amendment to the specification or drawings. Such an amendment must be accompanied by a statement that the material being inserted is the material previously incorporated by reference and that the amendment contains no new matter. (h) An incorporation of material by reference that does not comply with paragraphs (c), (d), or (e) of this section is not effective to incorporate such material unless corrected within any time period set by the Office, but in no case later than the close of prosecution as defined by § 1.114(b), or abandonment of the application, whichever occurs earlier. In addition: (1) A correction to comply with paragraph (c)(1) of this section is permitted only if the application as filed clearly conveys an intent to incorporate the material by reference. A mere reference to material does not convey an intent to incorporate the material by reference. (2) A correction to comply with paragraph (c)(2) of this section is only permitted for material that was sufficiently described to uniquely identify the document. (i) An application transmittal letter limited to the transmittal of a copy of the specification and drawings from a previously filed application submitted under paragraph (a) or (b) of this section may be signed by a juristic applicant or patent owner.

37 C.F.R. § 1.58 Chemical and mathematical formulae and tables.

(a) The specification, including the claims, may contain chemical and mathematical formulae, but shall not contain drawings or flow diagrams. The description portion of the specification may contain tables, but the same tables should not be included in both the drawings and description portion of the specification. Claims may contain tables either if necessary to conform to 35 U.S.C. 112 or if otherwise found to be desirable. (b) Chemical and mathematical formulas and tables must be presented in compliance with § 1.52(a) and (b), except that chemical and mathematical formulas or tables may be placed in a landscape orientation if they cannot be presented satisfactorily in a portrait orientation. Typewritten characters used in such formulas and tables must be chosen from a block (nonscript) type font or lettering style having capital letters that should be at least 0.422 cm (0.166 inches) high (e.g.,> preferably Arial, Times Roman, or Courier, with a font size of 12 points), but may be no smaller than 0.21cm (0.08 inches) high (e.g., a font size of 6 points). A space at least 0.64 cm (0.25 inches) high should be provided between complex formulas and tables and the text. Chemical and mathematical formulas must be configured to maintain the proper positioning of their characters when displayed in order to preserve their intended meaning. Tables should have the lines and columns of data closely spaced to conserve space, consistent with a high degree of legibility. (c) The following “Large Tables” may be submitted in electronic form in ASCII plain text via the USPTO patent electronic filing system or on a read-only optical disc, in compliance with § 1.52(e), excluding an international application during the international stage: (1) Any individual table that is more than 50 pages in length; or (2) Multiple tables, if the total number of pages of all the tables in an application exceeds 100 pages in length, where a table page is a page printed on paper, in conformance with paragraph (b) of this section. (d) “Large Tables” submitted in electronic form in ASCII plain text must conform to the following requirements: (1) Must maintain the spatial relationships (e.g., alignment of columns and rows) of the table elements when displayed to visually preserve the relational information they convey; (2) Must have the following compatibilities: (i) Computer compatibility: PC or Mac®; (ii) Operating system compatibility: MS-DOS®, MS-Windows®, Mac OS®, or Unix®/Linux®. (3) Must be in ASCII plain text, where: (i) All printable characters (including the space character) are permitted; (ii) No nonprintable (ASCII control) characters are permitted, except ASCII Carriage Return plus ASCII Line Feed (CRLF) or Line Feed (LF) as line terminators. (4) Must be named as *.txt, where “*” is one character or a combination of characters limited to upper- or lowercase letters, numbers, hyphens, and underscores and does not exceed 60 characters in total, excluding the extension. No spaces or other types of characters are permitted in the file name; and (5) Must be incorporated by reference in a separate paragraph of the specification, in accordance with § 1.77(b)(5). (e) “Large Tables” submitted via the USPTO patent electronic filing system must not exceed 25 MB, and file compression is not permitted. (f) “Large Tables” submitted in compliance with § 1.52(e) via read-only optical disc must meet the following requirements: (1) The ASCII plain text file may be compressed using WinZip®, 7-Zip, or Unix®/Linux® Zip; (2) A compressed file must not be self-extracting; and (3) A compressed ASCII plain text file that does not fit on a single read-only optical disc may be split into multiple file parts in accordance with the target read-only optical disc size and labeled in compliance with § 1.52(e)(5)(vi). (g) Any amendments to “Large Tables” in electronic form in ASCII plain text format must include: (1) A replacement ASCII plain text file, in accordance with the requirements of paragraphs (d) through (f) of this section, submitted via the USPTO patent electronic filing system or on a read-only optical disc, in compliance with § 1.52(e), labeled as “REPLACEMENT MM/DD/YYYY” (with the month, day, and year of creation indicated); (2) A request that the amendment be made by incorporation by reference of the material in the replacement ASCII plain text file, in a separate paragraph of the specification (replacing any prior such paragraph, as applicable) identifying the name of the file, the date of creation, and the size of the file in bytes (see § 1.77(b)(5)); (3) A statement that identifies the location of all deletions, replacements, or additions to the ASCII plain text file; and (4) A statement that the replacement ASCII plain text file contains no new matter. (h) The specification of an application with “Large Tables” as an ASCII plain text file, present on the application filing date, without an incorporation by reference of the material contained in the ASCII plain text file, must be amended to contain a separate paragraph incorporating by reference the material contained in the ASCII plain text file, in accordance with § 1.77(b)(5). (i) Any read-only optical disc for “Large Tables” must be submitted in duplicate. The read-only optical disc and duplicate copy must be labeled “Copy 1” and “Copy 2,” respectively. The transmittal letter that accompanies the read-only optical discs must include a statement that the two read-only optical discs are identical. In the event that the two read-only optical disc copies are not identical, the Office will use the read-only optical disc labeled “Copy 1” for further processing. (j) Any amendment to the information on a read-only optical disc must be by way of a replacement read-only optical disc, in compliance with paragraph (g) of this section, where the replacement read-only optical disc and copy must be labeled “COPY 1 REPLACEMENT MM/DD/YYYY” (with the month, day, and year of creation indicated), and “COPY 2 REPLACEMENT MM/DD/YYYY,” respectively.

37 C.F.R. § 1.59 Expungement of information or copy of papers in application file.

(a) (1) Information in an application will not be expunged, except as provided in paragraph (b) of this section or § 41.7(a) or § 42.7(a) of this title. (2) Information forming part of the original disclosure (i.e., written specification including the claims, drawings, and any preliminary amendment present on the filing date of the application) will not be expunged from the application file. (b) An applicant may request that the Office expunge information, other than what is excluded by paragraph (a)(2) of this section, by filing a petition under this paragraph. Any petition to expunge information from an application must include the fee set forth in § 1.17(g) and establish to the satisfaction of the Director that the expungement of the information is appropriate in which case a notice granting the petition for expungement will be provided. (c) Upon request by an applicant and payment of the fee specified in § 1.19(b), the Office will furnish copies of an application, unless the application has been disposed of (see §§ 1.53(e), (f) and (g)). The Office cannot provide or certify copies of an application that has been disposed of.

37 C.F.R. § 1.322 Certificate of correction of Office mistake.

(a)(1) The Director may issue a certificate of correction pursuant to 35 U.S.C. 254 to correct a mistake in a patent, incurred through the fault of the Office, which mistake is clearly disclosed in the records of the Office: (i) At the request of the patentee or the patentee's assignee; (ii) Acting sua sponte for mistakes that the Office discovers; or (iii) Acting on information about a mistake supplied by a third party. (2)(i) There is no obligation on the Office to act on or respond to a submission of information or request to issue a certificate of correction by a third party under paragraph (a)(1)(iii) of this section. (ii) Papers submitted by a third party under this section will not be made of record in the file that they relate to nor be retained by the Office. (3) If the request relates to a patent involved in an interference or trial before the Patent Trial and Appeal Board, the request must comply with the requirements of this section and be accompanied by a motion under § 41.121(a)(2), § 41.121(a)(3), or § 42.20 of this title. (4) The Office will not issue a certificate of correction under this section without first notifying the patentee (including any assignee of record) at the correspondence address of record as specified in § 1.33(a) and affording the patentee or an assignee an opportunity to be heard. (b) If the nature of the mistake on the part of the Office is such that a certificate of correction is deemed inappropriate in form, the Director may issue a corrected patent in lieu thereof as a more appropriate form for certificate of correction, without expense to the patentee.

37 C.F.R. § 1.323 Certificate of correction of applicant's mistake.

The Office may issue a certificate of correction under the conditions specified in 35 U.S.C. 255 at the request of the patentee or the patentee's assignee, upon payment of the fee set forth in § 1.20(a). If the request relates to a patent involved in an interference or trial before the Patent Trial and Appeal Board, the request must comply with the requirements of this section and be accompanied by a motion under § 41.121(a)(2), § 41.121(a)(3) or § 42.20 of this title.

37 C.F.R. § 1.324 Correction of inventorship in patent, pursuant to 35 U.S.C. 256.

(a) Whenever through error a person is named in an issued patent as the inventor, or an inventor is not named in an issued patent, the Director, pursuant to 35 U.S.C. 256, may, on application of all the parties and assignees, or on order of a court before which such matter is called in question, issue a certificate naming only the actual inventor or inventors. (b) Any request to correct inventorship of a patent pursuant to paragraph (a) of this section must be accompanied by: (1) A statement from each person who is being added as an inventor and each person who is currently named as an inventor either agreeing to the change of inventorship or stating that he or she has no disagreement in regard to the requested change; (2) A statement from all assignees of the parties submitting a statement under paragraph (b)(1) of this section agreeing to the change of inventorship in the patent, which statement must comply with the requirements of § 3.73(c) of this chapter; and (3) The fee set forth in § 1.20(b). (c) For correction of inventorship in an application, see § 1.48. (d) In an interference under part 41, subpart D, of this title, a request for correction of inventorship in a patent must be in the form of a motion under § 41.121(a)(2) of this title. In a contested case under part 42, subpart D, of this title, a request for correction of inventorship in a patent must be in the form of a motion under § 42.22 of this title. The motion under § 41.121(a)(2) or § 42.22 of this title must comply with the requirements of this section.

37 C.F.R. § 1.325 Other mistakes not corrected.

Mistakes other than those provided for in §§ 1.322, 1.323, 1.324, and not affording legal grounds for reissue or for reexamination, will not be corrected after the date of the patent.

37 C.F.R. § 1.161 Rules applicable.

The rules relating to applications for patent for other inventions or discoveries are also applicable to applications for patents for plants except as otherwise provided.

37 C.F.R. § 1.162 Applicant, oath or declaration.

The inventor named for a plant patent application must be the person who has invented or discovered and asexually reproduced the new and distinct variety of plant for which a patent is sought. The inventor's oath or declaration, in addition to the averments required by § 1.63 or § 1.64, must state that the inventor has asexually reproduced the plant. Where the plant is a newly found plant, the inventor's oath or declaration must also state that it was found in a cultivated area.

37 C.F.R. § 1.163 Specification and arrangement of application elements in a plant application.

(a) The specification must contain as full and complete a disclosure as possible of the plant and the characteristics thereof that distinguish the same over related known varieties, and its antecedents, and must particularly point out where and in what manner the variety of plant has been asexually reproduced. For a newly found plant, the specification must particularly point out the location and character of the area where the plant was discovered. (b) The elements of the plant application, if applicable, should appear in the following order: (1) Plant application transmittal form. (2) Fee transmittal form. (3) Application data sheet (see § 1.76). (4) Specification. (5) Drawings (in duplicate). (6) The inventor's oath or declaration (§ 1.162). (c) The specification should include the following sections in order: (1) Title of the invention, which may include an introductory portion stating the name, citizenship, and residence of the applicant. (2) Cross-reference to related applications (unless included in the application data sheet). (3) Statement regarding federally sponsored research or development. (4) Latin name of the genus and species of the plant claimed. (5) Variety denomination. (6) Background of the invention. (7) Brief summary of the invention. (8) Brief description of the drawing. (9) Detailed botanical description. (10) A single claim. (11) Abstract of the disclosure. (d) The text of the specification or sections defined in paragraph (c) of this section, if applicable, should be preceded by a section heading in upper case, without underlining or bold type.

37 C.F.R. § 1.164 Claim.

The claim shall be in formal terms to the new and distinct variety of the specified plant as described and illustrated, and may also recite the principal distinguishing characteristics. More than one claim is not permitted.

37 C.F.R. § 1.165 Plant drawings.

(a) Plant patent drawings should be artistically and competently executed and must comply with the requirements of § 1.84. View numbers and reference characters need not be employed unless required by the examiner. The drawing must disclose all the distinctive characteristics of the plant capable of visual representation. (b) The drawings may be in color. The drawing must be in color if color is a distinguishing characteristic of the new variety. Two copies of color drawings or photographs must be submitted.

37 C.F.R. § 1.166 Specimens.

The applicant may be required to furnish specimens of the plant, or its flower or fruit, in a quantity and at a time in its stage of growth as may be designated, for study and inspection. Such specimens, properly packed, must be forwarded in conformity with instructions furnished to the applicant. When it is not possible to forward such specimens, plants must be made available for official inspection where grown.

37 C.F.R. § 1.167 Examination.

Applications may be submitted by the Patent and Trademark Office to the Department of Agriculture for study and report.

37 C.F.R. § 1.211 Publication of applications.

(a) Each U.S. national application for patent filed in the Office under 35 U.S.C. 111(a) and each international application in compliance with 35 U.S.C. 371 will be published promptly after the expiration of a period of eighteen months from the earliest filing date for which a benefit is sought under title 35, United States Code, unless: (1) The application is recognized by the Office as no longer pending; (2) The application is national security classified (see § 5.2(c)), subject to a secrecy order under 35 U.S.C. 181, or under national security review; (3) The application has issued as a patent in sufficient time to be removed from the publication process; or (4) The application was filed with a nonpublication request in compliance with § 1.213(a). (b) Provisional applications under 35 U.S.C. 111(b) shall not be published, and design applications under 35 U.S.C. chapter 16, international design applications under 35 U.S.C. chapter 38, and reissue applications under 35 U.S.C. chapter 25 shall not be published under this section. (c) An application filed under 35 U.S.C. 111(a) will not be published until it includes the basic filing fee (§ 1.16(a) or (c)) and any English translation required by § 1.52(d). The Office may delay publishing any application until it includes any application size fee required by the Office under § 1.16(s) or § 1.492(j), a specification having papers in compliance with § 1.52 and an abstract (§ 1.72(b)), drawings in compliance with § 1.84, a “Sequence Listing” in compliance with §§ 1.821 through 1.825 (if applicable) for an application filed before July 1, 2022, a “Sequence Listing XML” in compliance with §§ 1.831 through 1.835 (if applicable) for an application filed on or after July 1, 2022, and the inventor's oath or declaration or application data sheet containing the information specified in § 1.63(b). (d) The Office may refuse to publish an application, or to include a portion of an application in the patent application publication (§ 1.215), if publication of the application or portion thereof would violate Federal or state law, or if the application or portion thereof contains offensive or disparaging material. (e) The publication fee set forth in § 1.18(d) must be paid in each application published under this section before the patent will be granted. If an application is subject to publication under this section, the sum specified in the notice of allowance under § 1.311 will also include the publication fee which must be paid within three months from the date of mailing of the notice of allowance to avoid abandonment of the application. This three-month period is not extendable. If the application is not published under this section, the publication fee (if paid) will be refunded.

37 C.F.R. § 1.213 Nonpublication request.

(a) If the invention disclosed in an application has not been and will not be the subject of an application filed in another country, or under a multilateral international agreement, that requires publication of applications eighteen months after filing, the application will not be published under 35 U.S.C. 122(b) and § 1.211 provided: (1) A request (nonpublication request) is submitted with the application upon filing; (2) The request states in a conspicuous manner that the application is not to be published under 35 U.S.C. 122(b); (3) The request contains a certification that the invention disclosed in the application has not been and will not be the subject of an application filed in another country, or under a multilateral international agreement, that requires publication at eighteen months after filing; and (4) The request is signed in compliance with § 1.33(b). (b) The applicant may rescind a nonpublication request at any time. A request to rescind a nonpublication request under paragraph (a) of this section must: (1) Identify the application to which it is directed; (2) State in a conspicuous manner that the request that the application is not to be published under 35 U.S.C. 122(b) is rescinded; and (3) Be signed in compliance with § 1.33(b). (c) If an applicant who has submitted a nonpublication request under paragraph (a) of this section subsequently files an application directed to the invention disclosed in the application in which the nonpublication request was submitted in another country, or under a multilateral international agreement, that requires publication of applications eighteen months after filing, the applicant must notify the Office of such filing within forty-five days after the date of the filing of such foreign or international application. The failure to timely notify the Office of the filing of such foreign or international application shall result in abandonment of the application in which the nonpublication request was submitted (35 U.S.C. 122(b)(2)(B)(iii)).

37 C.F.R. § 1.215 Patent application publication.

(a) The publication of an application under 35 U.S.C. 122(b) shall include a patent application publication. The date of publication shall be indicated on the patent application publication. The patent application publication will be based upon the specification and drawings deposited on the filing date of the application, as well as the application data sheet and/or the inventor's oath or declaration. The patent application publication may also be based upon amendments to the specification (other than the abstract or the claims) that are reflected in a substitute specification under § 1.125(b), amendments to the abstract under § 1.121(b), amendments to the claims that are reflected in a complete claim listing under § 1.121(c), and amendments to the drawings under § 1.121(d), provided that such substitute specification or amendment is submitted in sufficient time to be entered into the Office file wrapper of the application before technical preparations for publication of the application have begun. Technical preparations for publication of an application generally begin four months prior to the projected date of publication. The patent application publication of an application that has entered the national stage under 35 U.S.C. 371 may also include amendments made during the international stage. See paragraph (c) of this section for publication of an application based upon a copy of the application submitted via the USPTO patent electronic filing system. (b) The patent application publication will include the name of the assignee, person to whom the inventor is under an obligation to assign the invention, or person who otherwise shows sufficient proprietary interest in the matter if that information is provided in the application data sheet in an application filed under § 1.46. Assignee information may be included on the patent application publication in other applications if the assignee information is provided in an application data sheet submitted in sufficient time to be entered into the Office file wrapper of the application before technical preparations for publication of the application have begun. Providing assignee information in the application data sheet does not substitute for compliance with any requirement of part 3 of this chapter to have an assignment recorded by the Office. (c) At applicant's option, the patent application publication will be based upon the copy of the application (specification, drawings, and the application data sheet and/or the inventor's oath or declaration) as amended, provided that applicant supplies such a copy in compliance with the USPTO patent electronic filing system requirements within one month of the mailing date of the first Office communication that includes a confirmation number for the application, or fourteen months of the earliest filing date for which a benefit is sought under title 35, United States Code, whichever is later. (d) If the copy of the application submitted pursuant to paragraph (c) of this section does not comply with the USPTO patent electronic filing system requirements, the Office will publish the application as provided in paragraph (a) of this section. If, however, the Office has not started the publication process, the Office may use an untimely filed copy of the application supplied by the applicant under paragraph (c) of this section in creating the patent application publication.

37 C.F.R. § 1.217 Publication of a redacted copy of an application.

(a) If an applicant has filed applications in one or more foreign countries, directly or through a multilateral international agreement, and such foreign-filed applications or the description of the invention in such foreign-filed applications is less extensive than the application or description of the invention in the application filed in the Office, the applicant may submit a redacted copy of the application filed in the Office for publication, eliminating any part or description of the invention that is not also contained in any of the corresponding applications filed in a foreign country. The Office will publish the application as provided in § 1.215(a) unless the applicant files a redacted copy of the application in compliance with this section within sixteen months after the earliest filing date for which a benefit is sought under title 35, United States Code. (b) The redacted copy of the application must be submitted in compliance with the USPTO patent electronic filing system requirements. The title of the invention in the redacted copy of the application must correspond to the title of the application at the time the redacted copy of the application is submitted to the Office. If the redacted copy of the application does not comply with the USPTO patent electronic filing system requirements, the Office will publish the application as provided in § 1.215(a). (c) The applicant must also concurrently submit in paper (§ 1.52(a)) to be filed in the application: (1) A certified copy of each foreign-filed application that corresponds to the application for which a redacted copy is submitted; (2) A translation of each such foreign-filed application that is in a language other than English, and a statement that the translation is accurate; (3) A marked-up copy of the application showing the redactions in brackets; and (4) A certification that the redacted copy of the application eliminates only the part or description of the invention that is not contained in any application filed in a foreign country, directly or through a multilateral international agreement, that corresponds to the application filed in the Office. (d) The Office will provide a copy of the complete file wrapper and contents of an application for which a redacted copy was submitted under this section to any person upon written request pursuant to § 1.14(c)(2), unless applicant complies with the requirements of paragraphs (d)(1), (d)(2), and (d)(3) of this section. (1) Applicant must accompany the submission required by paragraph (c) of this section with the following: (i) A copy of any Office correspondence previously received by applicant including any desired redactions, and a second copy of all Office correspondence previously received by applicant showing the redacted material in brackets; and (ii) A copy of each submission previously filed by the applicant including any desired redactions, and a second copy of each submission previously filed by the applicant showing the redacted material in brackets. (2) In addition to providing the submission required by paragraphs (c) and (d)(1) of this section, applicant must: (i) Within one month of the date of mailing of any correspondence from the Office, file a copy of such Office correspondence including any desired redactions, and a second copy of such Office correspondence showing the redacted material in brackets; and (ii) With each submission by the applicant, include a copy of such submission including any desired redactions, and a second copy of such submission showing the redacted material in brackets. (3) Each submission under paragraph (d)(1) or (d)(2) of this paragraph must also be accompanied by the processing fee set forth in § 1.17(i) and a certification that the redactions are limited to the elimination of material that is relevant only to the part or description of the invention that was not contained in the redacted copy of the application submitted for publication. (e) The provisions of § 1.8 do not apply to the time periods set forth in this section.

37 C.F.R. § 1.219 Early publication.

Applications that will be published under § 1.211 may be published earlier than as set forth in § 1.211(a) at the request of the applicant. Any request for early publication must be accompanied by the publication fee set forth in § 1.18(d). If the applicant does not submit a copy of the application in compliance with the USPTO patent electronic filing system requirements pursuant to § 1.215(c), the Office will publish the application as provided in § 1.215(a). No consideration will be given to requests for publication on a certain date, and such requests will be treated as a request for publication as soon as possible.

37 C.F.R. § 1.221 Voluntary publication or republication of patent application publication.

(a) Any request for publication of an application filed before, but pending on, November 29, 2000, and any request for republication of an application previously published under § 1.211, must include a copy of the application in compliance with the USPTO patent electronic filing system requirements and be accompanied by the publication fee set forth in § 1.18(d) and the processing fee set forth in § 1.17(i). If the request does not comply with the requirements of this paragraph or the copy of the application does not comply with the USPTO patent electronic filing system requirements, the Office will not publish the application and will refund the publication fee. (b) The Office will grant a request for a corrected or revised patent application publication other than as provided in paragraph (a) of this section only when the Office makes a material mistake which is apparent from Office records. Any request for a corrected or revised patent application publication other than as provided in paragraph (a) of this section must be filed within two months from the date of the patent application publication. This period is not extendable.

37 C.F.R. § 1.71 Detailed description and specification of the invention.

(a) The specification must include a written description of the invention or discovery and of the manner and process of making and using the same, and is required to be in such full, clear, concise, and exact terms as to enable any person skilled in the art or science to which the invention or discovery appertains, or with which it is most nearly connected, to make and use the same. (b) The specification must set forth the precise invention for which a patent is solicited, in such manner as to distinguish it from other inventions and from what is old. It must describe completely a specific embodiment of the process, machine, manufacture, composition of matter or improvement invented, and must explain the mode of operation or principle whenever applicable. The best mode contemplated by the inventor of carrying out his invention must be set forth. (c) In the case of an improvement, the specification must particularly point out the part or parts of the process, machine, manufacture, or composition of matter to which the improvement relates, and the description should be confined to the specific improvement and to such parts as necessarily cooperate with it or as may be necessary to a complete understanding or description of it. (d) A copyright or mask work notice may be placed in a design or utility patent application adjacent to copyright and mask work material contained therein. The notice may appear at any appropriate portion of the patent application disclosure. For notices in drawings, see § 1.84(s). The content of the notice must be limited to only those elements provided for by law. For example, “© 1983 John Doe” (17 U.S.C. 401) and “ *M* John Doe” (17 U.S.C. 909) would be properly limited and, under current statutes, legally sufficient notices of copyright and mask work, respectively. Inclusion of a copyright or mask work notice will be permitted only if the authorization language set forth in paragraph (e) of this section is included at the beginning (preferably as the first paragraph) of the specification. (e) The authorization shall read as follows: (f) The specification must commence on a separate sheet. Each sheet including part of the specification may not include other parts of the application or other information. The claim(s), abstract, and “Sequence Listing” (if required or submitted under § 1.821(c)) should not be included on a sheet including any other part of the application. (g)(1) The specification may disclose or be amended to disclose the names of the parties to a joint research agreement as defined in § 1.9(e). (2) An amendment under paragraph (g)(1) of this section must be accompanied by the processing fee set forth in § 1.17(i) if not filed within one of the following time periods: (i) Within three months of the filing date of a national application; (ii) Within three months of the date of entry of the national stage as set forth in § 1.491 in an international application; (iii) Before the mailing of a first Office action on the merits; or (iv) Before the mailing of a first Office action after the filing of a request for continued examination under § 1.114. (3) If an amendment under paragraph (g)(1) of this section is filed after the date the issue fee is paid, the patent as issued may not necessarily include the names of the parties to the joint research agreement. If the patent as issued does not include the names of the parties to the joint research agreement, the patent must be corrected to include the names of the parties to the joint research agreement by a certificate of correction under 35 U.S.C. 255 and § 1.323 for the amendment to be effective. A portion of the disclosure of this patent document contains material which is subject to (copyright or mask work) protection. The (copyright or mask work) owner has no objection to the facsimile reproduction by anyone of the patent document or the patent disclosure, as it appears in the Patent and Trademark Office patent file or records, but otherwise reserves all (copyright or mask work) rights whatsoever.

37 C.F.R. § 1.72 Title and abstract.

(a) The title of the invention may not exceed 500 characters in length and must be as short and specific as possible. Characters that cannot be captured and recorded in the Office's automated information systems may not be reflected in the Office's records in such systems or in documents created by the Office. Unless the title is supplied in an application data sheet (§ 1.76), the title of the invention should appear as a heading on the first page of the specification. (b) A brief abstract of the technical disclosure in the specification must commence on a separate sheet, preferably following the claims, under the heading “Abstract” or “Abstract of the Disclosure.” The sheet or sheets presenting the abstract may not include other parts of the application or other material. The abstract must be as concise as the disclosure permits, preferably not exceeding 150 words in length. The purpose of the abstract is to enable the Office and the public generally to determine quickly from a cursory inspection the nature and gist of the technical disclosure.

37 C.F.R. § 1.73 Summary of the invention.

A brief summary of the invention indicating its nature and substance, which may include a statement of the object of the invention, should precede the detailed description. Such summary should, when set forth, be commensurate with the invention as claimed and any object recited should be that of the invention as claimed.

37 C.F.R. § 1.74 Reference to drawings.

When there are drawings, there shall be a brief description of the several views of the drawings and the detailed description of the invention shall refer to the different views by specifying the numbers of the figures and to the different parts by use of reference letters or numerals (preferably the latter).

37 C.F.R. § 1.75 Claim(s).

(a) The specification must conclude with a claim particularly pointing out and distinctly claiming the subject matter which the applicant regards as his invention or discovery. (b) More than one claim may be presented provided they differ substantially from each other and are not unduly multiplied. (c) One or more claims may be presented in dependent form, referring back to and further limiting another claim or claims in the same application. Any dependent claim which refers to more than one other claim (“multiple dependent claim”) shall refer to such other claims in the alternative only. A multiple dependent claim shall not serve as a basis for any other multiple dependent claim. For fee calculation purposes under § 1.16, a multiple dependent claim will be considered to be that number of claims to which direct reference is made therein. For fee calculation purposes also, any claim depending from a multiple dependent claim will be considered to be that number of claims to which direct reference is made in that multiple dependent claim. In addition to the other filing fees, any original application which is filed with, or is amended to include, multiple dependent claims must have paid therein the fee set forth in § 1.16(j). Claims in dependent form shall be construed to include all the limitations of the claim incorporated by reference into the dependent claim. A multiple dependent claim shall be construed to incorporate by reference all the limitations of each of the particular claims in relation to which it is being considered. (d)(1) The claim or claims must conform to the invention as set forth in the remainder of the specification and the terms and phrases used in the claims must find clear support or antecedent basis in the description so that the meaning of the terms in the claims may be ascertainable by reference to the description. (See § 1.58(a).) (2) See §§ 1.141 to 1.146 as to claiming different inventions in one application. (e) Where the nature of the case admits, as in the case of an improvement, any independent claim should contain in the following order: (1) A preamble comprising a general description of all the elements or steps of the claimed combination which are conventional or known, (2) A phrase such as “wherein the improvement comprises,” and (3) Those elements, steps and/or relationships which constitute that portion of the claimed combination which the applicant considers as the new or improved portion. (f) If there are several claims, they shall be numbered consecutively in Arabic numerals. (g) The least restrictive claim should be presented as claim number 1, and all dependent claims should be grouped together with the claim or claims to which they refer to the extent practicable. (h) The claim or claims must commence on a separate physical sheet or electronic page. Any sheet including a claim or portion of a claim may not contain any other parts of the application or other material. (i) Where a claim sets forth a plurality of elements or steps, each element or step of the claim should be separated by a line indentation.

37 C.F.R. § 1.76 Application data sheet.

(a) Application data sheet. An application data sheet is a sheet or sheets that may be submitted in a provisional application under 35 U.S.C. 111(b), a nonprovisional application under 35 U.S.C. 111(a), a nonprovisional international design application, or a national stage application under 35 U.S.C. 371 and must be submitted when required by § 1.55 or 1.78 to claim priority to or the benefit of a prior-filed application under 35 U.S.C. 119, 120, 121, 365, or 386. An application data sheet must be titled “Application Data Sheet.” An application data sheet must contain all of the section headings listed in paragraph (b) of this section, except as provided in paragraph (c)(2) of this section, with any appropriate data for each section heading. If an application data sheet is provided, the application data sheet is part of the application for which it has been submitted. (b) Bibliographic data. Bibliographic data as used in paragraph (a) of this section includes: (1) Inventor information. This information includes the legal name, residence, and mailing address of the inventor or each joint inventor. (2) Correspondence information. This information includes the correspondence address, which may be indicated by reference to a customer number, to which correspondence is to be directed (see § 1.33(a)). (3) Application information. This information includes the title of the invention, the total number of drawing sheets, a suggested drawing figure for publication (in a nonprovisional application), any docket number assigned to the application, the type of application (e.g., utility, plant, design, reissue, provisional), whether the application discloses any significant part of the subject matter of an application under a secrecy order pursuant to § 5.2 of this chapter (see § 5.2(c)), and, for plant applications, the Latin name of the genus and species of the plant claimed, as well as the variety denomination. When information concerning the previously filed application is required under § 1.57(a), application information also includes the reference to the previously filed application, indicating that the specification and any drawings of the application are replaced by the reference to the previously filed application, and specifying the previously filed application by application number, filing date, and the intellectual property authority or country in which the previously filed application was filed. (4) Representative information. This information includes the registration number of each practitioner having a power of attorney in the application (preferably by reference to a customer number). Providing this information in the application data sheet does not constitute a power of attorney in the application (see § 1.32). (5) Domestic benefit information. This information includes the application number, the filing date, the status (including patent number if available), and relationship of each application for which a benefit is claimed under 35 U.S.C. 119(e), 120, 121, 365(c), or 386(c). Providing this information in the application data sheet constitutes the specific reference required by 35 U.S.C. 119(e) or 120 and § 1.78. (6) Foreign priority information. This information includes the application number, country (or intellectual property authority), and filing date of each foreign application for which priority is claimed. Providing this information in the application data sheet constitutes the claim for priority as required by 35 U.S.C. 119(b) and § 1.55. (7) Applicant information: This information includes the name (either natural person or juristic entity) and address of the legal representative, assignee, person to whom the inventor is under an obligation to assign the invention, or person who otherwise shows sufficient proprietary interest in the matter who is the applicant under § 1.43 or § 1.46. Providing assignment information in the application data sheet does not substitute for compliance with any requirement of part 3 of this chapter to have an assignment recorded by the Office. (c) Correcting and updating an application data sheet. (1) Information in a previously submitted application data sheet, inventor's oath or declaration under § 1.63, § 1.64 or § 1.67, or otherwise of record, may be corrected or updated until payment of the issue fee by a new application data sheet providing corrected or updated information, except that inventorship changes must comply with the requirements of § 1.48, foreign priority and domestic benefit information changes must comply with §§ 1.55 and 1.78, and correspondence address changes are governed by § 1.33(a). (2) An application data sheet providing corrected or updated information may include all of the sections listed in paragraph (b) of this section or only those sections containing changed or updated information. The application data sheet must include the section headings listed in paragraph (b) of this section for each section included in the application data sheet, and must identify the information that is being changed, with underlining for insertions, and strike-through or brackets for text removed, except that identification of information being changed is not required for an application data sheet included with an initial submission under 35 U.S.C. 371. (d) Inconsistencies between application data sheet and other documents. For inconsistencies between information that is supplied by both an application data sheet under this section and other documents: (1) The most recent submission will govern with respect to inconsistencies as between the information provided in an application data sheet, a designation of a correspondence address, or by the inventor's oath or declaration, except that: (i) The most recent application data sheet will govern with respect to foreign priority (§ 1.55) or domestic benefit (§ 1.78) claims; and (ii) The naming of the inventorship is governed by § 1.41 and changes to inventorship or the names of the inventors is governed by § 1.48. (2) The information in the application data sheet will govern when inconsistent with the information supplied at the same time by a designation of correspondence address or the inventor's oath or declaration. The information in the application data sheet will govern when inconsistent with the information supplied at any time in a Patent Cooperation Treaty Request Form, Patent Law Treaty Model International Request Form, Patent Law Treaty Model International Request for Recordation of Change in Name or Address Form, or Patent Law Treaty Model International Request for Recordation of Change in Applicant or Owner Form. (3) The Office will capture bibliographic information from the application data sheet. The Office will generally not review the inventor's oath or declaration to determine if the bibliographic information contained therein is consistent with the bibliographic information provided in an application data sheet. Incorrect bibliographic information contained in an application data sheet may be corrected as provided in paragraph (c)(1) of this section. (e) Signature requirement. An application data sheet must be signed in compliance with § 1.33(b). An unsigned application data sheet will be treated only as a transmittal letter. (f) Patent Law Treaty Model International Forms. The requirement in § 1.55 or § 1.78 for the presentation of a priority or benefit claim under 35 U.S.C. 119, 120, 121, or 365 in an application data sheet will be satisfied by the presentation of such priority or benefit claim in the Patent Law Treaty Model International Request Form, and the requirement in § 1.57(a) for a reference to the previously filed application in an application data sheet will be satisfied by the presentation of such reference to the previously filed application in the Patent Law Treaty Model International Request Form. The requirement in § 1.46 for the presentation of the name of the applicant under 35 U.S.C. 118 in an application data sheet will be satisfied by the presentation of the name of the applicant in the Patent Law Treaty Model International Request Form, Patent Law Treaty Model International Request for Recordation of Change in Name or Address Form, or Patent Law Treaty Model International Request for Recordation of Change in Applicant or Owner Form, as applicable. (g) Patent Cooperation Treaty Request Form. The requirement in § 1.78 for the presentation of a benefit claim under 35 U.S.C. 119, 120, 121, or 365 in an application data sheet will be satisfied in a national stage application under 35 U.S.C. 371 by the presentation of such benefit claim in the Patent Cooperation Treaty Request Form contained in the international application or the presence of such benefit claim on the front page of the publication of the international application under PCT Article 21(2). The requirement in § 1.55 or § 1.78 for the presentation of a priority or benefit claim under 35 U.S.C. 119, 120, 121, or 365 in an application data sheet and the requirement in § 1.46 for the presentation of the name of the applicant under 35 U.S.C. 118 in an application data sheet will be satisfied in an application under 35 U.S.C. 111 by the presentation of such priority or benefit claim and presentation of the name of the applicant in a Patent Cooperation Treaty Request Form. If a Patent Cooperation Treaty Request Form is submitted in an application under 35 U.S.C. 111, the Patent Cooperation Treaty Request Form must be accompanied by a clear indication that treatment of the application as an application under 35 U.S.C. 111 is desired.

37 C.F.R. § 1.77 Arrangement of application elements.

(a) The elements of the application, if applicable, should appear in the following order: (1) Utility application transmittal form. (2) Fee transmittal form. (3) Application data sheet (see § 1.76). (4) Specification. (5) Drawings. (6) The inventor's oath or declaration. (b) The specification should include the following sections in order: (1) Title of the invention, which may be accompanied by an introductory portion stating the name, citizenship, and residence of the applicant (unless included in the application data sheet). (2) Cross-reference to related applications. (3) Statement regarding federally sponsored research or development. (4) The names of the parties to a joint research agreement. (5) An incorporation by reference statement regarding the material in: (i) One or more ASCII plain text files, submitted via the USPTO patent electronic filing system or on one or more read-only optical discs (see § 1.52(e)(8)), identifying the names of each file, the date of creation of each file, and the size of each file in bytes, for the following document types: (A) A “Computer Program Listing Appendix” (see § 1.96(c)); (B) A “Sequence Listing” (see § 1.821(c)); or (C) “Large Tables” (see § 1.58(c)). (ii) An XML file for a “Sequence Listing XML” (see § 1.831(a)), submitted via the USPTO patent electronic filing system or on one or more read-only optical discs (see § 1.52(e)(8)), identifying the names of each file, the date of creation of each file, and the size of each file in bytes. (6) Statement regarding prior disclosures by the inventor or a joint inventor. (7) Background of the invention. (8) Brief summary of the invention. (9) Brief description of the several views of the drawing. (10) Detailed description of the invention. (11) A claim or claims. (12) Abstract of the disclosure. (13) “Sequence Listing,” required by § 1.821(c), that is submitted as a Portable Document Format (PDF) file (as set forth in § 1.821(c)(2)) via the USPTO patent electronic filing system or on physical sheets of paper (as set forth in § 1.821(c)(3)). (c) The text of the specification sections defined in paragraphs (b)(1) through (b)(12) of this section, if applicable, should be preceded by a section heading in uppercase and without underlining or bold type.

37 C.F.R. § 1.78 Claiming benefit of earlier filing date and cross-references to other applications.

(a) Claims under 35 U.S.C. 119(e) for the benefit of a prior-filed provisional application. An applicant in a nonprovisional application, other than for a design patent, or an international application designating the United States may claim the benefit of one or more prior-filed provisional applications under the conditions set forth in 35 U.S.C. 119(e) and this section. (1) The nonprovisional application or international application designating the United States must be: (i) Filed not later than twelve months after the date on which the provisional application was filed, subject to paragraph (b) of this section (a subsequent application); or (ii) Entitled to claim the benefit under 35 U.S.C. 120, 121, or 365(c) of a subsequent application that was filed within the period set forth in paragraph (a)(1)(i) of this section. (2) Each prior-filed provisional application must name the inventor or a joint inventor named in the later-filed application as the inventor or a joint inventor. In addition, each prior-filed provisional application must be entitled to a filing date as set forth in § 1.53(c), and the basic filing fee set forth in § 1.16(d) must have been paid for such provisional application within the time period set forth in § 1.53(g). (3) Any nonprovisional application or international application designating the United States that claims the benefit of one or more prior-filed provisional applications must contain, or be amended to contain, a reference to each such prior-filed provisional application, identifying it by the provisional application number (consisting of series code and serial number). If the later-filed application is a nonprovisional application, the reference required by this paragraph must be included in an application data sheet (§ 1.76(b)(5)). (4) The reference required by paragraph (a)(3) of this section must be submitted during the pendency of the later-filed application. If the later-filed application is an application filed under 35 U.S.C. 111(a), this reference must also be submitted within the later of four months from the actual filing date of the later-filed application or sixteen months from the filing date of the prior-filed provisional application. If the later-filed application is a nonprovisional application entering the national stage from an international application under 35 U.S.C. 371, this reference must also be submitted within the later of four months from the date on which the national stage commenced under 35 U.S.C. 371(b) or (f) (§ 1.491(a)), four months from the date of the initial submission under 35 U.S.C. 371 to enter the national stage, or sixteen months from the filing date of the prior-filed provisional application. Except as provided in paragraph (c) of this section, failure to timely submit the reference is considered a waiver of any benefit under 35 U.S.C. 119(e) of the prior-filed provisional application. The time periods in this paragraph do not apply if the later-filed application is: (i) An application filed under 35 U.S.C. 111(a) before November 29, 2000; or (ii) An international application filed under 35 U.S.C. 363 before November 29, 2000. (5) If the prior-filed provisional application was filed in a language other than English and both an English-language translation of the prior-filed provisional application and a statement that the translation is accurate were not previously filed in the prior-filed provisional application, the applicant will be notified and given a period of time within which to file, in the prior-filed provisional application, the translation and the statement. If the notice is mailed in a pending nonprovisional application, a timely reply to such a notice must include the filing in the nonprovisional application of either a confirmation that the translation and statement were filed in the provisional application, or an application data sheet (§ 1.76(b)(5)) eliminating the reference under paragraph (a)(3) of this section to the prior-filed provisional application, or the nonprovisional application will be abandoned. The translation and statement may be filed in the provisional application, even if the provisional application has become abandoned. (6) If a nonprovisional application filed on or after March 16, 2013, claims the benefit of the filing date of a provisional application filed prior to March 16, 2013, and also contains, or contained at any time, a claim to a claimed invention that has an effective filing date as defined in § 1.109 that is on or after March 16, 2013, the applicant must provide a statement to that effect within the later of four months from the actual filing date of the nonprovisional application, four months from the date of entry into the national stage as set forth in § 1.491 in an international application, sixteen months from the filing date of the prior-filed provisional application, or the date that a first claim to a claimed invention that has an effective filing date on or after March 16, 2013, is presented in the nonprovisional application. An applicant is not required to provide such a statement if the applicant reasonably believes on the basis of information already known to the individuals designated in § 1.56(c) that the nonprovisional application does not, and did not at any time, contain a claim to a claimed invention that has an effective filing date on or after March 16, 2013. (b) Delayed filing of the subsequent nonprovisional application or international application designating the United States. If the subsequent nonprovisional application or international application designating the United States has a filing date which is after the expiration of the twelve-month period set forth in paragraph (a)(1)(i) of this section but within two months from the expiration of the period set forth in paragraph (a)(1)(i) of this section, the benefit of the provisional application may be restored under PCT Rule 26bis.3 for an international application, or upon petition pursuant to this paragraph, if the delay in filing the subsequent nonprovisional application or international application designating the United States within the period set forth in paragraph (a)(1)(i) of this section was unintentional. (1) A petition to restore the benefit of a provisional application under this paragraph filed on or after May 13, 2015, must be filed in the subsequent application, and any petition to restore the benefit of a provisional application under this paragraph must include: (i) The reference required by 35 U.S.C. 119(e) to the prior-filed provisional application in an application data sheet (§ 1.76(b)(5)) identifying it by provisional application number (consisting of series code and serial number), unless previously submitted; (ii) The petition fee as set forth in § 1.17(m); and (iii) A statement that the delay in filing the subsequent nonprovisional application or international application designating the United States within the twelve-month period set forth in paragraph (a)(1)(i) of this section was unintentional. The Director may require additional information where there is a question whether the delay was unintentional. (2) The restoration of the right of priority under PCT Rule 26bis.3 to a provisional application does not affect the requirement to include the reference required by paragraph (a)(3) of this section to the provisional application in a national stage application under 35 U.S.C. 371 within the time period provided by paragraph (a)(4) of this section to avoid the benefit claim being considered waived. (c) Delayed claims under 35 U.S.C. 119(e) for the benefit of a prior-filed provisional application. If the reference required by 35 U.S.C. 119(e) and paragraph (a)(3) of this section is presented in an application after the time period provided by paragraph (a)(4) of this section, the claim under 35 U.S.C. 119(e) for the benefit of a prior-filed provisional application may be accepted if the reference identifying the prior-filed application by provisional application number was unintentionally delayed. A petition to accept an unintentionally delayed claim under 35 U.S.C. 119(e) for the benefit of a prior-filed provisional application must be accompanied by: (1) The reference required by 35 U.S.C. 119(e) and paragraph (a)(3) of this section to the prior-filed provisional application, unless previously submitted; (2) The petition fee as set forth in § 1.17(m); and (3) A statement that the entire delay between the date the benefit claim was due under paragraph (a)(4) of this section and the date the benefit claim was filed was unintentional. The Director may require additional information where there is a question whether the delay was unintentional. (d) Claims under 35 U.S.C. 120, 121, 365(c), or 386(c) for the benefit of a prior-filed nonprovisional application, international application, or international design application. An applicant in a nonprovisional application (including a nonprovisional application resulting from an international application or international design application), an international application designating the United States, or an international design application designating the United States may claim the benefit of one or more prior-filed copending nonprovisional applications, international applications designating the United States, or international design applications designating the United States under the conditions set forth in 35 U.S.C. 120, 121, 365(c), or 386(c) and this section. (1) Each prior-filed application must name the inventor or a joint inventor named in the later-filed application as the inventor or a joint inventor. In addition, each prior-filed application must either be: (i) An international application entitled to a filing date in accordance with PCT Article 11 and designating the United States; (ii) An international design application entitled to a filing date in accordance with § 1.1023 and designating the United States; or (iii) A nonprovisional application under 35 U.S.C. 111(a) that is entitled to a filing date as set forth in § 1.53(b) or (d) for which the basic filing fee set forth in § 1.16 has been paid within the pendency of the application. (2) Except for a continued prosecution application filed under § 1.53(d), any nonprovisional application, international application designating the United States, or international design application designating the United States that claims the benefit of one or more prior-filed nonprovisional applications, international applications designating the United States, or international design applications designating the United States must contain or be amended to contain a reference to each such prior-filed application, identifying it by application number (consisting of the series code and serial number), international application number and international filing date, or international registration number and filing date under § 1.1023. If the later-filed application is a nonprovisional application, the reference required by this paragraph must be included in an application data sheet (§ 1.76(b)(5)). The reference also must identify the relationship of the applications, namely, whether the later-filed application is a continuation, divisional, or continuation-in-part of the prior-filed nonprovisional application, international application, or international design application. (3)(i) The reference required by 35 U.S.C. 120 and paragraph (d)(2) of this section must be submitted during the pendency of the later-filed application. (ii) If the later-filed application is an application filed under 35 U.S.C. 111(a), this reference must also be submitted within the later of four months from the actual filing date of the later-filed application or sixteen months from the filing date of the prior-filed application. If the later-filed application is a nonprovisional application entering the national stage from an international application under 35 U.S.C. 371, this reference must also be submitted within the later of four months from the date on which the national stage commenced under 35 U.S.C. 371(b) or (f) (§ 1.491(a)), four months from the date of the initial submission under 35 U.S.C. 371 to enter the national stage, or sixteen months from the filing date of the prior-filed application. The time periods in this paragraph do not apply if the later-filed application is: (A) An application for a design patent; (B) An application filed under 35 U.S.C. 111(a) before November 29, 2000; or (C) An international application filed under 35 U.S.C. 363 before November 29, 2000. (iii) Except as provided in paragraph (e) of this section, failure to timely submit the reference required by 35 U.S.C. 120 and paragraph (d)(2) of this section is considered a waiver of any benefit under 35 U.S.C. 120, 121, 365(c), or 386(c) to the prior-filed application. (4) The request for a continued prosecution application under § 1.53(d) is the specific reference required by 35 U.S.C. 120 to the prior-filed application. The identification of an application by application number under this section is the identification of every application assigned that application number necessary for a specific reference required by 35 U.S.C. 120 to every such application assigned that application number. (5) Cross-references to other related applications may be made when appropriate (see § 1.14), but cross-references to applications for which a benefit is not claimed under title 35, United States Code, must not be included in an application data sheet (§ 1.76(b)(5)). (6) If a nonprovisional application filed on or after March 16, 2013, other than a nonprovisional international design application, claims the benefit of the filing date of a nonprovisional application or an international application designating the United States filed prior to March 16, 2013, and also contains, or contained at any time, a claim to a claimed invention that has an effective filing date as defined in § 1.109 that is on or after March 16, 2013, the applicant must provide a statement to that effect within the later of four months from the actual filing date of the later-filed application, four months from the date of entry into the national stage as set forth in § 1.491 in an international application, sixteen months from the filing date of the prior-filed application, or the date that a first claim to a claimed invention that has an effective filing date on or after March 16, 2013, is presented in the later-filed application. An applicant is not required to provide such a statement if either: (i) The application claims the benefit of a nonprovisional application in which a statement under § 1.55(k), paragraph (a)(6) of this section, or this paragraph that the application contains, or contained at any time, a claim to a claimed invention that has an effective filing date on or after March 16, 2013 has been filed; or (ii) The applicant reasonably believes on the basis of information already known to the individuals designated in § 1.56(c) that the later filed application does not, and did not at any time, contain a claim to a claimed invention that has an effective filing date on or after March 16, 2013. (7) Where benefit is claimed under 35 U.S.C. 120, 121, 365(c), or 386(c) to an international application or an international design application which designates but did not originate in the United States, the Office may require a certified copy of such application together with an English translation thereof if filed in another language. (e) Delayed claims under 35 U.S.C. 120, 121, 365(c), or 386(c) for the benefit of a prior-filed nonprovisional application, international application, or international design application. If the reference required by 35 U.S.C. 120 and paragraph (d)(2) of this section is presented after the time period provided by paragraph (d)(3) of this section, the claim under 35 U.S.C. 120, 121, 365(c), or 386(c) for the benefit of a prior-filed copending nonprovisional application, international application designating the United States, or international design application designating the United States may be accepted if the reference required by paragraph (d)(2) of this section was unintentionally delayed. A petition to accept an unintentionally delayed claim under 35 U.S.C. 120, 121, 365(c), or 386(c) for the benefit of a prior-filed application must be accompanied by: (1) The reference required by 35 U.S.C. 120 and paragraph (d)(2) of this section to the prior-filed application, unless previously submitted; (2) The petition fee as set forth in § 1.17(m); and (3) A statement that the entire delay between the date the benefit claim was due under paragraph (d)(3) of this section and the date the benefit claim was filed was unintentional. The Director may require additional information where there is a question whether the delay was unintentional. (f) Applications containing patentably indistinct claims. Where two or more applications filed by the same applicant or assignee contain patentably indistinct claims, elimination of such claims from all but one application may be required in the absence of good and sufficient reason for their retention during pendency in more than one application. (g) Applications or patents under reexamination naming different inventors and containing patentably indistinct claims. If an application or a patent under reexamination and at least one other application naming different inventors are owned by the same person and contain patentably indistinct claims, and there is no statement of record indicating that the claimed inventions were commonly owned or subject to an obligation of assignment to the same person on the effective filing date (as defined in § 1.109), or on the date of the invention, as applicable, of the later claimed invention, the Office may require the applicant or assignee to state whether the claimed inventions were commonly owned or subject to an obligation of assignment to the same person on such date, and if not, indicate which named inventor is the prior inventor, as applicable. Even if the claimed inventions were commonly owned, or subject to an obligation of assignment to the same person on the effective filing date (as defined in § 1.109), or on the date of the invention, as applicable, of the later claimed invention, the patentably indistinct claims may be rejected under the doctrine of double patenting in view of such commonly owned or assigned applications or patents under reexamination. (h) Applications filed before September 16, 2012. Notwithstanding the requirement in paragraphs (a)(3) and (d)(2) of this section that any specific reference to a prior-filed application be presented in an application data sheet (§ 1.76), this requirement in paragraph (a)(3) and (d)(2) of this section will be satisfied by the presentation of such specific reference in the first sentence(s) of the specification following the title in a nonprovisional application filed under 35 U.S.C. 111(a) before September 16, 2012, or resulting from an international application filed under 35 U.S.C. 363 before September 16, 2012. The provisions of this paragraph do not apply to any specific reference submitted for a petition under paragraph (b) of this section to restore the benefit of a provisional application. (i) Petitions required in international applications. If a petition under paragraph (b), (c), or (e) of this section is required in an international application that was not filed with the United States Receiving Office and is not a nonprovisional application, then such petition may be filed in the earliest nonprovisional application that claims benefit under 35 U.S.C. 120, 121, 365(c), or 386(c) to the international application and will be treated as having been filed in the international application. (j) Benefit under 35 U.S.C. 386(c). Benefit under 35 U.S.C. 386(c) with respect to an international design application is applicable only to nonprovisional applications, international applications, and international design applications filed on or after May 13, 2015, and patents issuing thereon. (k) Time periods in this section. The time periods set forth in this section are not extendable, but are subject to 35 U.S.C. 21(b) (and § 1.7(a)), PCT Rule 80.5, and Hague Agreement Rule 4(4).

Source: eCFRURL: https://www.ecfr.gov/api/versioner/v1/full/2024-07-01/title-37.xmlFetched: 7/26/2026