CFR Subpart A

CFR Subpart A
in effect

19 C.F.R. § 10.99 Importation of ethyl alcohol for nonbeverage purposes.

(a) If claim is made by an importer other than the United States or a governmental agency thereof for the classification of ethyl alcohol of an alcoholic strength by volume of 80 percent volume or higher under subheading 2207.10.60, Harmonized Tariff Schedules of the United States, the importer or his agent shall file in connection with the entry a declaration, or its electronic equivalent, that the alcohol is to be used for nonbeverage purposes only and whether the alcohol is to be used for fuel purposes. Customs shall release the alcohol for transfer, under internal revenue bond, to a distilled spirits plant upon deposit of estimated duty, if any, and without the payment of the internal revenue tax upon receipt of a transfer record for bulk spirits. In addition, a package gauge record must be submitted to Customs if the alcohol is in packages, as specified in subpart I of part 251, Bureau of Alcohol, Tobacco and Firearms (BATF) Regulations (27 CFR part 251, subpart I). The transfer shall be accomplished in accordance with subpart L of part 251, Bureau of Alcohol, Tobacco and Firearms Regulations (27 CFR part 251, subpart L). (b) An appropriate BATF permit shall be filed with Customs in connection with the withdrawal of ethyl alcohol from Customs custody by the United States or any governmental agency thereof for its own use for nonbeverage purposes. Such permit shall be filed before release under the entry without the deposit of estimated duties, if any, and internal revenue tax, or before release in accordance with the provisions of § 141.102(d) of this chapter. (See subpart M of part 251, Bureau of Alcohol, Tobacco and Firearms Regulations (27 CFR part 251, subpart M)). (c) The procedures for the withdrawal free of tax on the entry of ethyl alcohol for nonbeverage purposes from the Virgin Islands are found in subpart O of part 250, Bureau of Alcohol, Tobacco and Firearms Regulations (27 CFR part 250, subpart O).

19 C.F.R. § 10.90 Master records and metal matrices.

(a) Consumption entries covering importations under subheading 8524.99.20, HTSUS, shall be filed at a port in the Customs district in which the factory where the articles will be used is located. (b) The invoice, or its electronic equivalent, filed with the entry shall contain or be supported by a detailed statement of the cost of production, or its electronic equivalent, in the country where made, of each master record or metal matrix covered thereby. (c) A bond on Customs Form 301, containing the bond conditions set forth in § 113.62 of this chapter shall be filed for importations under this section. (d) Entries already filed and future entries shall be liquidated in due course without the assessment of duty, but liability on bonds given with the entries shall be discontinued with respect to any article covered thereby only upon payment of liquidated damages in an amount equal to the duties which would have accrued had the master records or metal matrices been imported for use otherwise than in the manufacture of sound records for export purposes, or upon satisfactory proof that the master records or metal matrices obtained therefrom have been exported or destroyed under Customs supervision, and that all sound records made with the use of such articles have been exported.

19 C.F.R. § 10.108 Entry of reimported articles exported under lease.

Free entry shall be accorded under subheading 9801.00.20, Harmonized Tariff Schedule of the United States (HTSUS), whenever it is established to the satisfaction of the Center director that the article for which free entry is claimed was duty paid on a previous importation or was previously entered free of duty pursuant to the Caribbean Basin Economic Recovery Act or Title V of the Trade Act of 1974, is being reimported without having been advanced in value or improved in condition by any process of manufacture or other means, was exported from the United States under a lease or similar use agreement, and is being reimported by or for the account of the person who imported it into, and exported it from, the United States.

19 C.F.R. § 10.121 Visual or auditory materials of an educational, scientific, or cultural character.

(a) Where photographic film and other articles described in subheading 9817.00.40, Harmonized Tariff Schedule of the United States (HTSUS), are claimed to be free of duty under subheading 9817.00.40, HTSUS, there must be filed, in connection with the entry covering such articles, a document issued by the U.S. Department of State, or its electronic equivalent, certifying that it has determined that the articles are visual or auditory materials of an educational, scientific, or cultural character within the meaning of the Agreement for Facilitating the International Circulation of Visual and Auditory Materials of an Educational, Scientific, and Cultural Character as required by U.S. note 1(a)(i), Subchapter XVII, chapter 98, HTSUS. (b) Articles entered under subheading 9817.00.40, HTSUS, will be released from CBP custody prior to submission of the document required in paragraph (a) of this section only upon the deposit of estimated duties with CBP, either at the port of entry or electronically. Liquidation of an entry which has been released under this procedure will be suspended for a period of 314 days from the date of entry or until the required document is submitted, whichever comes first. In the event that documentation is not submitted before liquidation, the merchandise will be classified and liquidated in the ordinary course, without regard to subheading 9817.00.40, HTSUS.

19 C.F.R. § 10.131 Circumstances in which applicable.

The provisions of §§ 10.131 through 10.139 are applicable in those circumstances in which the rate of duty applicable to merchandise is dependent upon actual use, unless there is a specific provision in this part which governs the treatment of the merchandise. However, specific marking or certification requirements, such as those for bolting cloths in section 10.58, may be applicable to merchandise subject to the provisions of sections 10.131-10.139.

19 C.F.R. § 10.133 Conditions required to be met.

When the tariff classification of any article is controlled by its actual use in the United States, three conditions must be met in order to qualify for free entry or a lower rate of duty unless the language of the particular subheading of the Harmonized Tariff Schedule of the United States applicable to the merchandise specifies other conditions. The conditions are that: (a) Such use is intended at the time of importation. (b) The article is so used. (c) Proof of use is furnished within 3 years after the date the article is entered or withdrawn from warehouse for consumption.

19 C.F.R. § 10.134 Declaration of intent.

A showing of intent by the importer as to the actual use of imported merchandise shall be made by filing with the entry for consumption or for warehouse a declaration as to the intended use of the merchandise, or by entering the proper subheading of an actual use provision of the Harmonized Tariff Schedule of the United States (HTSUS) and the reduced or free rate of duty on the entry form. Entry made under an actual use provision of the HTSUS may be construed as a declaration that the merchandise is entered to be used for the purpose stated in the HTSUS, provided the Center director is satisfied the merchandise will be so used. However, the Center director shall require a written declaration to be filed if he is not satisfied that merchandise entered under an actual use provision will be used for the purposes stated in the HTSUS.

19 C.F.R. § 10.135 Deposit of duties.

When the requirement of § 10.134 has been met the merchandise may be entered or withdrawn from warehouse for consumption without deposit of duty when proof of use will result in free entry, or with deposit of duty at the lower rate when proof of use will result in a lower rate of duty.

19 C.F.R. § 10.136 Suspension of liquidation.

Liquidation of an entry covering merchandise for which a declaration of intent has been made pursuant to § 10.134 and any required deposit of duties made, shall be suspended until proof of use is furnished or the 3-year period allowed for production thereof has expired.

19 C.F.R. § 10.137 Records of use.

(a) Maintenance by importer. The importer shall maintain accurate and detailed records showing the use or other disposition of the imported merchandise. The burden shall be on the importer to keep records so that the claim of actual use can be readily established. (b) Retention of records. The importer shall retain records of use or disposition for a period of 3 years from the date of liquidation of the entry. (c) Examination of records. The rec- ords required to be kept by paragraph (a) of this section shall be available at all times for examination and inspection by an authorized Customs officer.

19 C.F.R. § 10.138 Proof of use.

Within 3 years from the date of entry or withdrawal from warehouse for consumption, the importer shall submit in duplicate in support of his claim for free entry or for a reduced rate of duty a certificate executed by (1) the superintendent or manager of the manufacturing plant, or (2) the individual end-user or other person having knowledge of the actual use of the imported article. The certificate shall include a description of the processing in sufficient detail to show that the use contemplated by the law has actually taken place. A blanket certificate covering all purchases of a given type of merchandise from a particular importer during a given period, or all such purchases with specified exceptions, may be accepted for this purpose, provided the importer shall furnish a statement showing in detail, in such manner as to be readily identified with each entry, the merchandise which he sold to such manufacturer or end-user during such period.

19 C.F.R. § 10.139 Liquidation.

(a) In general. Upon satisfactory proof of timely use of the merchandise for the purpose specified by law, the entry shall be liquidated free of duty or at the lower rate of duty specified by law. When such proof is not filed within 3 years from the date of entry or withdrawal from warehouse for consumption, the entry shall be liquidated dutiable under the appropriate subheading of the Harmonized Tariff Schedule of the United States. (b) Exception for blackstrap molasses. An entry covering blackstrap molasses, as hereinafter defined, may be accepted and liquidated with duty at the lower rate after the filing of the declaration of intent required by § 10.134 and the deposit of estimated duties required by § 10.135 without compliance with §§ 10.136, 10.137, and 10.138. Blackstrap molasses is “final” molasses practically free from sugar crystals, containing not over 58 percent total sugars and having a ratio of

19 C.F.R. § 10.56 Vegetable oils, denaturing; release.

(a) Olive, palm-kernel, rapeseed, sunflower, and sesame oil shall be classifiable under subheadings 1509.10.20, 1509.10.40, 1509.90.20, 1509.90.40, 1510.00.20, 1512.19.20, 1513.29.00, 1514.90.10, 1514.90.50, 1515.50.00, Harmonized Tariff Schedule of the United States, if denatured abroad or under Customs supervision after importation but before release from Customs custody, at the request and expense of the importer, by a formula prescribed by Headquarters, U.S. Customs Service, or if by their method of production abroad they are rendered unfit for use as food or for any but mechanical or manufacturing purposes. (b) Each cask or package of oil claimed to have been before importation denatured or otherwise rendered unfit for use as food or for any but mechanical or manufacturing purposes shall be sampled and tested by an appraising officer. (c) Formulas prescribed by Headquarters, U.S. Customs Service, except proprietary mixtures, will be circulated to all Customs officers and will appear as abstracts of United States Customs Service decisions published in the weekly Customs Bulletins. Proprietary mixtures approved by the Commissioner of Customs will not be published but appropriate notice of their approval will be given to all Customs officers. (d) The Headquarters, U.S. Customs Service, will from time to time prescribe additional formulas, and will consider any formula for special denaturing that may be submitted. (e) The Center director may, if he deems it advisable, require an importer requesting permission to use any authorized denaturant to submit to the appraiser an adequate sample of such denaturant, in order that the appraiser may report to the Center director whether or not such denaturant is suitable for rendering the oil unfit for use as food or for any but mechanical or manufacturing purposes. (f) No such oil shall be released free of duty until the appraiser shall have made a special report that it has been properly denatured.

19 C.F.R. § 10.91 Prototypes used exclusively for product development and testing.

(a) Duty-free entry; declaration of use; extension of liquidation—(1) Entry or withdrawal for consumption. Articles defined as “prototypes” and meeting the other requirements prescribed in paragraph (b) of this section may be entered or withdrawn from warehouse for consumption, duty-free, under subheading 9817.85.01, Harmonized Tariff Schedule of the United States (HTSUS), on CBP Form 7501 or an electronic equivalent. A separate entry or withdrawal must be made for a qualifying prototype article each time the article is imported/reimported to the United States. (2) Importer declaration—(i) Entry accepted as declaration. Entry or withdrawal from warehouse for consumption under HTSUS subheading 9817.85.01 may be accepted by the Center director as an effective declaration that the articles will be used solely for the purposes stated in the subheading. (ii) Proof (declaration) of actual use. If it is believed the circumstances so warrant, the Center director may request the submission of proof of actual use, executed and dated by the importer. The title of the party executing the proof of actual use must be set forth. If proof of actual use is requested, the importer must provide it within three years after the date the article is entered or withdrawn from warehouse for consumption. Liquidation of the related entry may be extended until the requested proof or declaration of actual use is received or until the three-year period from the date of entry allowed for the receipt of such proof has expired. While requested proof of use must be given to CBP within three years of the date of entry, the prototype may continue to be used thereafter for the purposes enumerated in HTSUS subheading 9817.85.01. If requested proof of use is not timely received, the entry will be liquidated as dutiable under the tariff provision that would otherwise apply to the imported article. While there is no particular form for this declaration, it may either be submitted in writing, or electronically as authorized by CBP, and must include the following: (A) A description of the use that is being and/or that has been made of the articles set forth in sufficient detail so as to enable the Center director to determine whether the articles have been entitled to entry as claimed; (B) A statement that the articles have not and are not to be put to any other use after the articles have been entered or withdrawn from warehouse for consumption and prior to the completion of their use under HTSUS 9817.85.01 (also see paragraphs (c) and (d) of this section concerning the disposition(s) to which the articles may be put following their use under HTSUS subheading 9817.85.01); and (C) A statement that the articles or any parts of the articles have not been and are not intended to be sold, or incorporated into other products that are sold, after the articles have been entered or withdrawn from warehouse for consumption and prior to the completion of their use as provided in HTSUS subheading 9817.85.01 (see paragraph (b)(2)(ii) of this section). (b) Articles classifiable as prototypes—(1) Prototypes defined. In accordance with U.S. Note 6(a) to subchapter XVII of chapter 98, HTSUS, applicable to subheading 9817.85.01, the term “prototypes” means originals or models of articles pertaining to any industry that: (i) Are either in the preproduction, production or postproduction stage and are to be used exclusively for development, testing, product evaluation, or quality control purposes (not including automobile racing for purse, prize or commercial competition); and (ii) In the case of originals or models of articles that are either in the production or postproduction stage, are associated with a design change from current production (including a refinement, advancement, improvement, development or quality control in either the product itself or the means of producing the product). (2) Additional requirements. In accordance with U.S. Note 6(b) and (c) to subchapter XVII of chapter 98, HTSUS, applicable to subheading 9817.85.01, the following additional restrictions apply to articles that may be classified as prototypes: (i) Importations limited. Prototypes may be imported pursuant to this section only in limited noncommercial quantities in accordance with industry practice. (ii) Sale prohibited after entry and prior to use. Prototypes or parts of prototypes may not be sold, or be incorporated into other products that are sold into the commerce of the United States, after the prototypes have been entered or withdrawn from warehouse for consumption under HTSUS subheading 9817.85.01, except that, after having been used for the purposes for which they were entered or withdrawn from warehouse under HTSUS subheading 9817.85.01, such prototypes or any part(s) of the prototypes may be sold as scrap, waste, or for recycling, as prescribed in paragraph (c) of this section. (iii) Articles subject to laws of another agency. Articles that are subject to licensing requirements, or that must comply with laws, rules or regulations administered by an agency other than CBP before being imported, may be entered as prototypes pursuant to this section if they meet all applicable provisions of law and otherwise meet the definition of prototypes in paragraph (b)(1) of this section. (iv) Articles excluded from being prototypes. Articles that are in fact subject at the time of entry to quantitative restrictions, antidumping orders or countervailing duty orders are excluded from being classified as prototypes under this section. (c) Sale of prototype following use—(1) Sale. Prototypes or any part(s) of prototypes, after having been used for the purposes for which they were entered or withdrawn under HTSUS subheading 9817.85.01, may only be sold as scrap, waste, or for recycling. This includes a prototype or any part thereof that is incorporated into another product, as scrap, waste, or recycled material. If sold as scrap, waste, or for recycling, applicable duty must be paid on the prototypes or parts as provided in paragraph (c)(3) of this section, at the rate of duty in effect for such scrap, waste, or recycled materials at the time the prototypes were entered or withdrawn for consumption. (2) Notice of sale required. If, after a prototype has been used for the purposes contemplated in HTSUS subheading 9817.85.01, the prototype or any part(s) of the prototype (including a prototype or any part that is incorporated into another product) is sold as scrap, waste, or for recycling, the importer must provide notice of such sale to CBP, either at the port of entry or electronically. A notice, in the manner authorized in paragraph (c)(3) of this section, must be submitted in connection with the sale, whether or not duty is payable. The notice should not be submitted prior to the submission of proof of actual use, should such proof of actual use be requested by the Center director (see paragraph (a)(2)(ii) of this section). (3) Form and content of notice; tender of duty. While no particular form is required for the notice of sale, a consumption entry (CBP Form 7501), appropriately modified, or an electronic equivalent as authorized by CBP, may be used for this purpose. The notice may be a blanket notice covering all those sales described in paragraph (c)(2) of this section that occur over a quarterly (3-month) calendar period. Such notice must be filed within 10 business days of the end of the related quarterly period in which the sale(s) occurred. If an article sold is dutiable, the payment of any duty due must be forwarded together with the notice (see paragraph (c)(1) of this section). If the notice is filed electronically, payment of any duty owed will be handled through the Automated Clearinghouse (see § 24.25 of this chapter). The notice of sale must be executed by the importer, or other person having knowledge of the facts surrounding the sale, and must include the following: (i) The identity of the prototype; the consumption entry number under which it was imported; a copy of the declaration of actual use, if proof of actual use was requested under paragraph (a)(2)(ii) of this section; and a detailed description of the condition of the prototype following use for the intended permissible purposes, including any damage, degradation or deterioration to the article resulting from such use and/or otherwise resulting to the article from any other cause prior to its sale for scrap, waste, or recycling; (ii) The name and address of the party to whom the article was sold, and (if known) the use to which the party intends to put the article; (iii) The HTSUS subheading number for scrap, waste, or recycled material, as applicable, claimed in connection with the sale of the prototype, together with the corresponding rate of duty in effect at the time the prototype was originally imported for consumption; (iv) The value of the prototype article (if dutiable and the duty owed is based upon value) (see paragraph (e)(2) of this section); and (v) The title of the party executing the declaration and the date of execution. (d) Prototypes not sold following use. As to those prototypes or parts of prototypes that, after having been used as prescribed under HTSUS subheading 9817.85.01, are disposed of otherwise than by sale (see paragraph (c)(1) of this section), there is no requirement that the importer notify CBP of any such alternative disposition. Nor are there any dutiable consequences that ensue from any disposition of the merchandise after the merchandise's use under HTSUS subheading 9817.85.01 other than sale to the extent authorized under paragraph (c)(1) of this section. (e) Recordkeeping; retention and production—(1) Recordkeeping. The importer must be prepared to submit to the CBP officer, if requested, any information, including any supporting documents, reports and records, as was necessary for the preparation of the declaration of use, if the declaration of use was requested under paragraph (a)(2)(ii) of this section, and the notice of sale, if applicable under paragraph (c)(3) of this section. The notices, together with any related supporting evidence, may be subject to such verification as the Center director reasonably deems necessary. Supporting documentary evidence must be made available to the CBP officer, upon request, for a period of five years (see § 163.4(a) of this chapter) from the date of filing in complete and proper form, the declaration of use, if requested, and, if applicable, the notice of sale. The supporting records must be made available to the CBP officer upon request in accordance with § 163.6 of this chapter. (i) Documents supporting the proof (declaration) of actual use must: (A) Establish that the identity and description of the prototype article is the same article that the consumption entry was made for under subheading 9817.85.01, HTSUS; and (B) Describe the circumstances of the use of the article; the operations, testing, review, manipulation, experimentation, and/or other exercises that are being and/or that have been conducted in connection with the prototype; and the location, such as the plant or production facility, where these activities occurred, sufficient to demonstrate that the purposes enumerated in HTSUS subheading 9817.85.01 are taking and/or have actually taken place. (ii) Documents supporting the notice of sale must establish that: (A) The identity of the prototype sold is the same article for which a consumption entry was made under subheading 9817.85.01 HTSUS when it was imported, and that the article was in the condition described in the notice of sale; (B) The article was sold to the party identified in the notice of sale; (C) The HTSUS subheading number for scrap, waste, or recycled material, as applicable, claimed in connection with the sale of the prototype is accurate; (D) The date that the prototype was originally imported for consumption, and the corresponding rate of duty in effect at the time for the applicable HTSUS subheading; and (E) The value of the prototype article (if dutiable and the duty owed is based upon value) (see paragraph (e)(2) of this section) as claimed in the notice of sale is accurate. (2) Relevant value for used prototype or parts sold. For purposes of this section, with respect to any duty owed on prototypes or parts of prototypes that are sold as scrap, or waste, or for recycling, where the duty owed is based upon value, the relevant value is the market value of the prototypes or parts, based upon their character and condition following use for the purposes prescribed in HTSUS subheading 9817.85.01. The relevant value should take into consideration any damage, degradation or deterioration to the prototypes or parts resulting from their use as a prototype and/or otherwise resulting to the articles from any other cause prior to their sale as scrap, waste, or for recycling. The market value will generally be measured by the selling price. Should a prototype or part of a prototype become a component of another product that is sold as scrap, waste, or recycled material, the relevant market value would be that portion of the selling price attributable to the component (prototype or part) as provided in this paragraph. (f) Articles admitted under TIB—(1) Duty-free entry available. Under the procedure presented in paragraph (f)(2) of this section, an entry of an article made under a temporary importation bond (TIB) solely for testing, experimental or review purposes under HTSUS subheading 9813.00.30 may be converted into a duty-free entry under HTSUS subheading 9817.85.01, if the following conditions exist: (i) The article meets the definition for “prototypes” in paragraph (b) of this section (U.S. Note 6(a) to subchapter XVII, chapter 98, HTSUS); and (ii) The TIB entry for the article was in effect and had not been closed, and the TIB period for the article had not expired, as of November 9, 2000. (2) Procedure for converting TIB entry to duty-free entry—(i) Importer request. The importer must submit a written request, or an electronic equivalent as authorized by CBP, that a TIB entry made under HTSUS subheading 9813.00.30, which was in effect and had not been closed, and for which the TIB period had not expired, as of November 9, 2000, be converted instead into a duty-free consumption entry under HTSUS subheading 9817.85.01. (ii) Action by CBP. CBP will convert the TIB entry under HTSUS subheading 9813.00.30 to a duty-free entry under HTSUS subheading 9817.85.01, provided that the Center director is satisfied that the conditions set forth in paragraphs (f)(1)(i) and (f)(1)(ii) of this section have been met. When the TIB entry is converted, the bond will be cancelled and the entry closed. Once the conversion is complete, the Center director will provide a courtesy acknowledgment to this effect to the importer in writing or electronically.

19 C.F.R. § 10.100 Entry, examination, and tariff status.

Except as otherwise provided for in §§ 10.101, 10.102, 10.104, 141.83(d)(8), 141.102(d), or elsewhere in this chapter, importations made by or for the account of any agency or office of the United States Government are subject to the usual Customs entry and examination requirements. In the absence of express exemptions from duty, such as are contained in subheadings 9808.00.10, 9808.00.20, 9808.00.30, 9808.00.40, 9808.00.50, 9808.00.60, 9808.00.70, or other subheadings in the Harmonized Tariff Schedule of the United States (19 U.S.C. 1202) providing for free entry, such importations are also subject to duty.

19 C.F.R. § 10.101 Immediate delivery.

(a) Shipments entitled to immediate delivery. Shipments consigned to or for the account of any agency or office of the United States Government, or to an officer or official of any such agency in his official capacity, shall be regarded for purposes of these regulations as shipments the immediate delivery of which is necessary within the purview of section 448(b), Tariff Act of 1930, as amended (19 U.S.C. 1448(b)). (b) Immediate delivery applications. The shipments described in the preceding paragraph may be released upon the filing of immediate delivery applications on Customs Form 3461, or its electronic equivalent, as set forth in subpart A of part 142 of this chapter. Such applications may be limited to particular shipments or may cover all shipments imported by the Government agency making the application. They may be approved for specific periods of time or for indefinite periods of time, provided in either case they are supported by carrier's certificates and stipulations as provided for in paragraph (c) of this section. (c) Carrier's certificates and stipulations. Before the release of a shipment under an immediate delivery permit, evidence of the right of the applicant to make entry for the articles shall be furnished the port director in accordance with the provisions of §§ 141.11 and 141.12 of this chapter. (d) Bond. No bond shall be required in support of an immediate delivery application provided for in this section if a stipulation in the form as set forth below is filed with the port director in connection with the application: (e) Timely entries required. If proper entries for consumption for importations released under these regulations are not filed within a reasonable time, appropriate steps shall be taken to insure the prompt filing of such entries. I, ________, ________ (Title), a duly authorized representative of the (Name of United States Government department or agency) stipulate and agree on behalf of such department or agency that all applicable provisions of the Tariff Act of 1930, as amended, and the regulations thereunder, and all other laws and regulations, relating to the release and entry of merchandise will be observed and complied with in all respects. (Signature)

19 C.F.R. § 10.102 Duty-free entries.

(a) Invoice or declaration. No invoice or other declaration of the shipper shall be required for shipments expressly exempt from duty as provided in subheadings 9808.00.10, 9808.00.20, 9808.00.30, 9808.00.40, 9808.00.50, 9808.00.60, 9808.00.70, or other subheadings in the Harmonized Tariff Schedule of the United States (HTSUS) (19 U.S.C. 1202) providing for free entry. However, the importing Government agency or office shall present any invoice, memorandum invoice, or bill, or their electronic equivalents, pertaining to the merchandise in its possession or available to it, or, if no such invoice or bill is available, a pro forma invoice, or its electronic equivalent, prepared in accordance with § 141.85 of this chapter, setting forth adequate information for examination and determination of the dutiable status of the merchandise. In addition, the Center director shall only admit articles free of duty under subheadings 9808.00.30, 9808.00.40, 9808.00.50, HTSUS (19 U.S.C. 1202), upon the receipt, either at the port of entry or electronically, of a certificate executed in the manner and form described in paragraph (b) of this section. (b) Certification. One of the following certificates executed by a duly authorized officer or official of the appropriate Government agency or office is required for free entry of articles under subheadings 9808.00.30, 9808.00.40, or 9808.00.50, HTSUS (19 U.S.C. 1202). The certificates may be submitted electronically, printed, stamped, or typewritten on the Customs entry or withdrawal form, Customs Form 7501, or its electronic equivalent, or on a separate paper attached to the entry or withdrawal form filed by the Government agency or office, provided the certification is clearly and unmistakably identified with the articles covered by the entry or withdrawal. (1) Articles for military departments, subheading 9808.00.30, HTSUS. I certify that the procurement of this material constituted an emergency purchase of war material abroad by the Department of the (name of military department), and it is accordingly requested that such material be admitted free of duty pursuant to subheading 9808.00.30, HTSUS. (2) Articles for the Defense Logistics Agency, subheading 9808.00.40, HTSUS. Pursuant to subheading 9808.00.40, HTSUS, I hereby certify that the above-described materials are strategic and critical materials procured under the Strategic and Critical Materials Stock Piling Act (50 U.S.C. 98e). (3) Articles for the Department of Energy, subheading 9808.00.50, HTSUS. I certify to the Secretary of the Treasury that the above-described materials are source materials purchased abroad, the admittance of which is necessary in the interest of the common defense and security, in accordance with subheading 9808.00.50, HTSUS. (c) Release of shipments. Shipments for which free entry has been or will be claimed under subheading 9808.00.30, 9808.00.40, 9808.00.50, HTSUS (19 U.S.C. 1202), shall be released after only such examination as is necessary to identify them. (d) Entry in Government name. All materials for which free entry is claimed under subheading 9808.00.30, 9808.00.40, 9808.00.50, HTSUS (19 U.S.C. 1202), shall be entered, or withdrawn from warehouse, for consumption in the name of the Government department whose representative executes the certificate set forth in § 10.102(b) unless exemption from this requirement is specifically authorized by the Center director. (Name) (Title), who has been designated to execute free-entry certificates for the above-named department. (Grade or Rank) (Organization) (Name) (Title), Defense Logistics Agency, who has been duly authorized to execute the above certificate. (Name) (Title), who has been authorized to execute free-entry certificates for the Department of Energy.

19 C.F.R. § 10.103 American goods returned.

(a) Certificate required. Articles entered, or withdrawn from warehouse, for consumption in the name of an agency or office of the United States Government (with the exception of military scrap belonging to the Department of Defense) may be admitted free of duty under subheading 9801.00.10, Harmonized Tariff Schedule of the United States (HTSUS) (19 U.S.C. 1202), upon the filing of a certificate on the letterhead of the agency or office in the following form in lieu of other entry documentation: (b) Combined certificate when articles are intermingled. When articles claimed to be free under subheading 9801.00.10 and other articles claimed to be free under subheadings 9808.00.30, 9808.00.40, 9808.00.50, HTSUS (19 U.S.C. 1202), are intermingled in a single shipment in a manner which precludes separation for the purpose of making claims for free entry under the separate categories, all the articles may be covered by a combined certificate which follows the requirements of § 10.102(b) and paragraph (a) of this section. (c) Execution of certificate. The certificate required by paragraph (a) of this section may be executed by any military installation transportation officer having knowledge of the facts or by any other officer or official specifically designated or authorized to execute such certificates by the importing Government agency or office. If the merchandise arrived on a commercial carrier, the entry shall be supported by evidence of the right to make it. I hereby certify: 1. That the following articles imported in the ________________________ (Name of Carrier) at the port of ________________________ (Port) on ____________ (Date) consist of returned products which are the growth, produce, or manufacture of the United States, and have been returned to the United States without having been advanced in value or improved in condition by any process of manufacture or other means, and that no drawback has been or will be claimed on such articles, and that the articles currently belonging to and are for the further use of ________________________ (Agency or Office) Number of containers Bill of lading No. 1 General description of articles 1 If shipment arrives in the United States on a commercial carrier. 2. That the shipment does not contain military scrap. 3. That the shipment is entitled to entry under subheading 9801.00.10, Harmonized Tariff Schedule of the United States (HTSUS) free of duty. 4. That I am a military installation transportation officer having knowledge of the facts involved in this certificate. or I am an officer or official authorized by ________________ (Agency or Office) (Whichever is applicable) to execute this certificate. (Name) (Rank and branch of service or Agency or Office)

19 C.F.R. § 10.104 Temporary importation entries for United States Government agencies.

The entry of articles brought into the United States temporarily by an agency or office of the United States Government and claimed to be exempt from duty under Chapter 98, Subchapter XIII, Heading 9813, Harmonized Tariff Schedule of the United States (HTSUS), shall be made on Customs Form 7501, or its electronic equivalent. No bond shall be required if the agency or office files a stipulation in the form set forth in § 141.102(d) of this chapter. In those cases in which the provisions of Chapter 98, Subchapter XIII, HTSUS (19 U.S.C. 1202), are not met, however, the Center director will proceed as if a bond had been filed to cover the particular importation. Articles temporarily imported by a Government agency or office under this section are entitled to immediate delivery under the procedures set forth in § 10.101.

19 C.F.R. § 10.84 Automotive vehicles and articles for use as original equipment in the manufacture of automotive vehicles.

(a)(1) Certain motor vehicles and motor vehicle equipment are eligible for duty-free entry as proclaimed by the President under the Automotive Products Trade Act of 1965. The articles designated for such duty-free treatment are defined in General Note 3(c)(iii), HTSUS (19 U.S.C. 1202). Specifically, such articles are those designated [as “Free (B)”] in the “Special” subcolumn in Chapter 87, HTSUS, and must qualify as “Canadian articles” as defined in General Note 3(c)(iii)(A)(1), HTSUS. To claim exemption from duty under the Automotive Products Trade Act of 1965, an importer must establish, to the satisfaction of the appropriate Customs officer, that the article in question qualifies as a “Canadian article” for purposes of General Note 3(c)(iii)A)(1), HTSUS. The Customs officer may accept as satisfactory evidence a certificate executed by the exporter as set forth in paragraph (b) of this section, subject to any verification he may deem necessary. Alternatively, the Customs officer may determine that under the circumstances of the importation a certificate is unnecessary. (2) Under the United States-Canada Free-Trade Agreement and implementing legislation (Pub. L. 100-449, 102 Stat. 1851) a manufacturer of motor vehicles may elect to average, over its 12-month financial year, its calculation of the value-content requirement for vehicles in establishing its eligibility for tariff preference. Requirements for averaging are set forth in §§ 10.310 and 10.311. (b)(1) When all materials used at any stage in the production of the imported article are wholly obtained or produced in Canada or the United States, or both, a certificate, or its electronic equivalent, in the following form may be accepted as evidence that the commodity is a “Canadian article”: (2) When any material used at any stage in the production of an imported article or any of its components is not wholly obtained or produced in Canada or the United States, or both, a certificate, or its electronic equivalent, in the following form may be accepted as evidence that the commodity is nevertheless a “Canadian article”: (3) If such Customs officer is satisfied that the revenue will be protected adequately thereby, he may accept in lieu of the certificate specified in paragraph (b)(2) of this section a certificate, or its electronic equivalent, in the following form when the merchandise covered thereby has been produced with third country material but is an originating good under a specific rule of origin for the merchandise: (4) The certificates described in paragraphs (b)(2) and (b)(3) of this section, or their electronic equivalents, shall not be accepted if the statements therein make it evident that the importation is not a “Canadian article” within the meaning of General Note 3(c), HTSUS. (5) If more than one kind of article is covered by a certificate provided for in paragraph (b) (1), (2), or (3) of this section, the information required by the certificate shall be shown with respect to each kind. When more than one kind of material, other than originating material, is used in the production of an article covered by such a certificate, the certificate shall state the number of units, a description sufficient for tariff classification purposes, the price paid, and, if not included in the price paid, the costs incurred in transporting the materials to the location of the producer and duties, taxes and brokerage fees paid in Canada and/or the United States on the material, per unit of each kind of materials. (6) A certificate conforming to paragraph (b) (1), (2), or (3) of this section shall be accepted as evidence of the facts alleged therein only if: (i) There is annexed thereto a copy of the commercial invoice or bill of lading, or the electronic equivalent, covering the articles or other documentary evidence which identifies the article to which the certificate pertains, (ii) The certificate, or its electronic equivalent, is signed by the manufacturer or producer of the article to which it pertains, or by the person who exported the articles from Canada, and (iii) It clearly appears that such copy or other documentary evidence was annexed to the certificate when it was signed. (c) In lieu of the certification in paragraph (b) (1), (2), or (3) of this section, a manufacturer of motor vehicles who claims a preference under the United States-Canada Free-Trade Agreement and elects to average pursuant to § 10.310(a), shall be subject to the requirements of §§ 10.301 to 10.311 of this part. (d) When an importer makes an entry, or withdrawal from warehouse, for consumption of articles for use as “original motor-vehicle equipment” as that term is defined in General Note 3(c)(iii), HTSUS, he shall file in connection therewith his declaration that the articles are being imported for use as original equipment in the manufacture in the United States of the kinds of motor vehicles specified in the General Note and furnish the name and address of the motor vehicle manufacturer. A copy of the written order, contract, or letter of intent shall be attached to the importer's declaration except that if the Center director is satisfied that a copy of the written order, contract, or letter of intent will be made available by the importer or ultimate consignee for inspection by customs officials upon request during a period of 3 years from the date of such entry or withdrawal from warehouse, the production of such documents will not be required. Proof of use need not be furnished. (e) If, after a Canadian article has been accorded the status of original motor-vehicle equipment, it is decided to divert the article from its intended use in the manufacture in the United States of motor vehicles, the importer or other person deciding to divert the article from such intended use shall give notice in writing of the decision to the CBP, either at the port of entry or electronically or where the offices of the importer are located and either make arrangements for its destruction or exportation under Customs supervision or pay duties in accordance with General Note 3(c)(iii)(B)(2), HTSUS. If such article is not destroyed or exported under Customs supervision or the duties paid, the article, or its value, shall be subject to forfeiture. All materials contained in the product covered by the __________ (Describe the invoice, bill of lading, or other document or statement identifying the shipment) annexed or appended to this certificate of Canadian origin at the time it was subscribed were wholly obtained or produced in Canada or the United States, or both. No materials other than those which were wholly obtained or produced in Canada or the United States, or both, were incorporated into this product or any of its components at any stage of production or in the production of any intermediate product used at any stage in the chain of production in Canada or the United States, or both. The product covered by the __________ (Describe the invoice, bill of lading, or other document or statement identifying the shipment) annexed or appended to this certificate of Canadian origin at the time it was subscribed is an originating good so as to be a Canadian article. There were used in its production in Canada __________ (Description sufficient for tariff classification of the materials, and number of units) of third country materials of which the price paid was __________ per unit of quantity, plus __________ which represents all costs incurred in transporting the materials to the location of the producer and the duties, taxes, and brokerage fees on the materials, if such costs were not included in the price paid. The product covered by the __________ (Describe the invoice, bill of lading, or other document or statement identifying the shipment) annexed or appended to this certificate of Canadian origin at the time it was subscribed is an originating good so as to be a Canadian article. There were or may have been used in its production in Canada or the United States, or both, materials of a third country. It is impractical to ascertain the exact number of units of third country material, if any, used in its production or the price paid (and other costs required to be included in the price paid) of such materials but to the best of (my) (our) (its) knowledge the materials are described (sufficient for tariff classification purposes) as follows: __________.

19 C.F.R. § 10.183 Duty-free entry of civil aircraft, aircraft engines, ground flight simulators, parts, components, and subassemblies.

(a) Applicability. Except as provided in paragraph (b) of this section, this section applies to aircraft, aircraft engines, and ground flight simulators, including their parts, components, and subassemblies, that qualify as civil aircraft under General Note 6(b) ofthe Harmonized Tariff Schedule of the United States (HTSUS) by meeting the following requirements: (1) The aircraft, aircraft engines, ground flight simulators, or their parts, components, and subassemblies, are used as original or replacement equipment in the design, development, testing, evaluation, manufacture, repair, maintenance, rebuilding, modification, or conversion of aircraft; and (2) They are either: (i) Manufactured or operated pursuant to a certificate issued by the Administrator of the Federal Aviation Administration (FAA) under 49 U.S.C. 44704 or pursuant to the approval of the airworthiness authority in the country of exportation, if that approval is recognized by the FAA as an acceptable substitute for the FAA certificate; (ii) Covered by an application for such certificate, submitted to and accepted by the FAA, filed by an existing type and production certificate holder pursuant to 49 U.S.C. 44702 and implementing regulations (Federal Aviation Administration Regulations, title 14, Code of Federal Regulations); or (iii) Covered by an application for such approval or certificate which will be submitted in the future by an existing type and production certificate holder, pending the completion of design or other technical requirements stipulated by the FAA (applicable only to the quantities of parts, components, and subassemblies as are required to meet the stipulation). (b) Department of Defense or U.S. Coast Guard use. If purchased for use by the Department of Defense or the United States Coast Guard, aircraft, aircraft engines, and ground flight simulators, including their parts, components, and subassemblies, are subject to this section only if they are used as original or replacement equipment in the design, development, testing, evaluation, manufacture, repair, maintenance, rebuilding, modification, or conversion of aircraft and meet the requirements of either paragraph (a)(2)(i) or (a)(2)(ii) of this section. (c) Claim for admission free of duty. Merchandise qualifying under paragraph (a) or paragraph (b) of this section is entitled to duty-free admission in accordance with General Note 6, HTSUS, upon meeting the requirements of this section. An importer will make a claim for duty-free admission under this section and General Note 6, HTSUS, by properly entering qualifying merchandise under a provision for which the rate of duty “Free (C)” appears in the “Special” subcolumn of the HTSUS and by placing the special indicator “C” on the entry summary. The fact that qualifying merchandise has previously been exported with benefit of drawback does not preclude free entry under this section. (d) Importer certification. In making a claim for duty-free admission as provided for under paragraph (c) of this section, the importer is deemed to certify, in accordance with General Note 6(a)(ii), HTSUS, that the imported merchandise is, as described in paragraph (a) or paragraph (b) of this section, a civil aircraft or has been imported for use in a civil aircraft and will be so used. (e) Documentation. Each entry summary claiming duty-free admission for imported merchandise in accordance with paragraph (c) of this section must be supported by documentation to verify the claim for duty-free admission, including the written order or contract and other evidence that the merchandise entered qualifies under General Note 6, HTSUS, as a civil aircraft, aircraft engine, or ground flight simulator, or their parts, components, and subassemblies. Evidence that the merchandise qualifies under the general note includes evidence of compliance with paragraph (a)(1) of this section concerning use of the merchandise and evidence of compliance with the airworthiness certification requirement of paragraph (a)(2)(i), (a)(2)(ii), or (a)(2)(iii) of this section, including, as appropriate in the circumstances, an FAA certification; approval of airworthiness by an airworthiness authority in the country of export and evidence that the FAA recognizes that approval as an acceptable substitute for an FAA certification; an application for a certification submitted to and accepted by the FAA; a type and production certificate issued by the FAA; and/or evidence that a type and production certificate holder will submit an application for certification or approval in the future pending completion of design or other technical requirements stipulated by the FAA and of estimates of quantities of parts, components, and subassemblies as are required to meet design and technical requirements stipulated by the FAA. This documentation need not be filed with the entry summary but must be maintained in accordance with the general note and with the recordkeeping provisions of part 163 of this chapter. Customs may request production of documentation at any time to verify the claim for duty-free admission. Failure to produce documentation sufficient to satisfy the Center director that the merchandise qualifies for duty-free admission will result in a denial of duty-free treatment and may result in such other measures permitted under the regulations as the Center director finds necessary to more closely monitor the importer's importations of merchandise claimed to be duty-free under this section. Proof of end use of the entered merchandise need not be maintained. (f) Post-entry claim. An importer may file a claim for duty-free treatment under General Note 6, HTSUS, after filing an entry that made no such duty-free claim, by filing a written statement with Customs any time prior to liquidation of the entry or prior to the liquidation becoming final. When filed, the written statement constitutes the importer's claim for duty-free treatment under the general note and its certification that the entered merchandise is a civil aircraft or has been imported for use in a civil aircraft and will be so used. In accordance with General Note 6, HTSUS, any refund resulting from a claim made under this paragraph will be without interest, notwithstanding the provision of 19 U.S.C. 1505(c). (g) Verification. The Center director will monitor and periodically audit selected entries made under this section.

19 C.F.R. § 10.179 Canadian crude petroleum subject to a commercial exchange agreement between United States and Canadian refiners.

(a) Crude petroleum (as defined in Chapter 27, Additional U.S. Note 1, Harmonized Tariff Schedule of the United States (19 U.S.C. 1202)) produced in Canada may be admitted free of duty if the entry is accompanied by a certificate from the importer, or its electronic equivalent, establishing that: (1) The petroleum is imported pursuant to a commercial exchange agreement between United States and Canadian refiners which has been approved by the Secretary of Energy; (2) An equivalent amount of domestic or duty-paid foreign crude petroleum on which the importer has executed a written waiver of drawback, has been exported to Canada pursuant to the export license and previously has not been used to effect the duty-free entry of like Canadian products; and, (3) An export license has been issued by the Secretary of Commerce for the petroleum which has been exported to Canada. (b) The provisions of this section may be applied to: (1) Liquidated or reliquidated entries if the required certification is filed with CBP, either at the port of entry or electronically on or before the 180th day after the date of entry; and (2) Articles entered, or withdrawn from warehouse, for consumption, pursuant to a commercial exchange agreement. (c) Verification of the quantities of crude petroleum exported to or imported from Canada under such a commercial exchange agreement shall be made in accordance with import verification provided in Part 151, Subpart C, Customs Regulations (19 CFR part 151, subpart C).

19 C.F.R. § 10.43 Duty-free status.

(a) The Center director may, at his discretion, require appropriate proof of duty-free status for articles for institutions claimed to be exempt from duty under subheadings 9810.00.05, 9810.00.15, 9810.00.25, 9810.00.30, 9810.00.40, 9810.00.45, 9810.00.50, 9810.00.55, Harmonized Tariff Schedule of the United States (19 U.S.C. 1202). (b) Appropriate proof may be a copy of the charter or other evidence of the character of the institution for the use of which the articles are imported.

19 C.F.R. § 10.46 Articles for the United States.

Pursuant to subheadings 9808.00.10 and 9808.00.20, books, engravings, and other articles therein enumerated, which are imported by authority or for the use of the United States or for the use of the Library of Congress, shall be admitted free of duty upon the written request of the head of the bureau or executive department concerned.

19 C.F.R. § 10.31 Entry; bond.

(a)(1) Entry of articles brought into the United States temporarily and claimed to be exempt from duty under Chapter 98, Subchapter XIII, Harmonized Tariff Schedule of the United States (HTSUS), unless covered by an A.T.A. carnet or a TECRO/AIT carnet as provided in part 114 of this chapter, shall be made on Customs Form 3461 or 7533, supported by the documentation required by § 142.3 of this chapter. However, when § 10.36 or § 10.36a is applicable, or the aggregate value of the article is not over $250, the form prescribed for the informal entry of importations by mail, in baggage, or by other means, may be used. When entry is made on Customs Form 3461 or 7533, an entry summary, Customs Form 7501, shall be filed within 10 days after time of entry, in accordance with subpart B, part 142 of this chapter. (2) If Customs Form 7501, or its electronic equivalent, is filed at time of entry, it shall serve as both the entry and entry summary, and Customs Form 3461, or its electronic equivalent, or 7533 shall not be required. Customs Form 7501, or its electronic equivalent, shall be in original only, except for entries under subheading 9813.00.05, HTSUS, which require a duplicate copy for statistical purposes. When articles are entered under an A.T.A. carnet or a TECRO/AIT carnet, the importation voucher of the carnet shall serve as the entry. (3) In addition to the data usually shown on a regular consumption entry summary, each temporary importation bond entry summary shall include: (i) The HTSUS subheading number under which entry is claimed. (ii) A statement of the use to be made of the articles in sufficient detail to enable the Center director to determine whether they are entitled to entry as claimed, and (iii) A declaration that the articles are not to be put to any other use and that they are not imported for sale or sale on approval. (b) The port director, if he is satisfied as to the importer's identity and good faith, may admit a vehicle or craft brought in by a nonresident to take part in a race or other specific contest for which no money purse is awarded, under the provisions of subheading 9813.00.35, HTSUS, without formal entry or security for exportation. If at the time of arrival it appears that the article is likely to remain in the United States beyond 90 days, formal entry and bond shall be taken. (c) When any article has been admitted without formal entry or security for exportation and the importer thereafter desires to prolong his stay beyond 90 days, an entry covering the article and security for its exportation shall be accepted at any port where the article may be presented for entry. The time during which the imported article may remain in the United States under the entry shall be computed from the date of its original arrival in the United States. The estimated duties for the purpose of fixing the amount of any bond required by paragraph (f) of this section shall be the estimated duties which would have been required to be deposited had the article been entered under an ordinary consumption entry on the date of the original arrival. (d) [Reserved] (e) The entry or invoice shall: (1) Describe each article in detail; (2) set forth the value of each article; and (3) set forth any marks or numbers thereon or other distinguishing features thereof. In the case of a vehicle, aircraft, or pleasure boat entered under subheading 9813.00.05, HTSUS and § 10.36a, the registration number, and engine or motor number, and the body number (if available) shall also be shown on the entry. Examination of the imported articles shall be made whenever the circumstances warrant, and occasionally in any event to an extent which will enable the Customs officer to determine that the importation is in agreement with the invoice or entry as to identity and quantity and for the purpose of accepting the entry under the applicable provisions of Chapter 98, Subchapter XIII, HTSUS. No examination for the purpose of appraisement and no appraisement of the articles shall be made. (f) With the exceptions stated herein, a bond shall be given on CBP Form 301, containing the bond conditions set forth in § 113.62 of this chapter, in an amount equal to double the duties, including fees, which it is estimated would accrue (or such larger amount as the Center director shall state in writing or by the electronic equivalent to the entrant is necessary to protect the revenue) had all the articles covered by the entry been entered under an ordinary consumption entry. In the case of samples solely for use in taking orders entered under subheading 9813.00.20, HTSUS, motion-picture advertising films entered under subheading 9813.00.25, HTSUS, and professional equipment, tools of trade and repair components for such equipment or tools entered under subheading 9813.00.50, HTSUS, the bond required to be given shall be in an amount equal to 110 percent of the estimated duties, including fees, determined at the time of entry. If appropriate a carnet, under the provisions of part 114 of this chapter, may be filed in lieu of a bond on CBP Form 301 (containing the bond conditions set forth in § 113.62 of this chapter). Cash deposits in the amount of the bond may be accepted in lieu of sureties. When the articles are entered under subheading 9813.00.05, 9813.00.20, or 9813.00.50, HTSUS without formal entry, as provided for in §§ 10.36 and 10.36a, or the amount of the bond taken under any subheading of Chapter 98, Subchapter XIII, HTSUS, is less than $25, the bond shall be without surety or cash deposit, and the bond shall be modified to so indicate. In addition, notwithstanding any other provision of this paragraph, in the case of professional equipment necessary for carrying out the business activity, trade or profession of a business person, equipment for the press or for sound or television broadcasting, cinematographic equipment, articles imported for sports purposes and articles intended for display or demonstration, if brought into the United States by a resident of Canada, Mexico, Singapore, Chile, Morocco, Australia, El Salvador, Guatemala, Honduras, Nicaragua, the Dominican Republic, Costa Rica, Bahrain, Oman, Peru, the Republic of Korea, Colombia, or Panama and entered under Chapter 98, Subchapter XIII, HTSUS, no bond or other security will be required if the entered article is a good originating, within the meaning of General Notes 12, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, and 35, HTSUS, in the country of which the importer is a resident. (g) Claim for free entry under Chapter 98, Subchapter XIII, HTSUS may be made for articles of any character described therein which have been previously entered under any other provision of law and the entry amended accordingly upon compliance with the requirements of this section, provided the articles have not been released from CBP custody, or even though released from CBP custody if it is established that the original entry was made on the basis of a clerical error, mistake of fact, or other inadvertence within the meaning of section 514(a), Tariff Act of 1930, as amended, and was brought to the attention of CBP within the time limits of that section. If an entry is so amended, the period of time during which the merchandise may remain in the customs territory of the United States under bond shall be computed from the date of importation. In the case of articles covered by an informal mail entry, such a claim may be made within a reasonable time either before or after the articles have been released from CBP custody. (h) After the entry and bond have been accepted, the articles may be released to the importer. The entry shall not be liquidated as the transaction does not involve liquidated duties. However, a TIB importer may be required to file an entry for consumption and pay duties, or pay liquidated damages under its bond for a failure to do so, in the case of merchandise imported under subheading 9813.00.05, HTSUS, and subsequently exported to Canada or Mexico (see § 181.53 of this chapter).

19 C.F.R. § 10.33 Theatrical effects.

For purposes of the entry of theatrical scenery, properties and apparel under subheading 9817.00.98, Harmonized Tariff Schedule of the United States: (a) Animals imported for use or exhibition in theaters or menageries may be classified as theatrical properties; and (b) The term “theatrical scenery, properties and apparel” shall not be construed to include motion-picture films.

19 C.F.R. § 10.35 Models of women's wearing apparel.

(a) Models of women's wearing apparel admitted under subheading 9813.00.10, Harmonized Tariff Schedule of the United States (HTSUS), shall not be removed from the importer's establishment for reproducing, copying, painting, sketching, or for any other use by others, nor be used in the importer's establishment for such purposes except by the importer or his employees. (b) Invoices covering models of women's wearing apparel entered under subheading 9813.00.10 or 9813.00.25, HTSUS shall state the kind and color of the principal material from which the apparel is made, and shall contain a description of the lining and the trimming, stating whether composed of fur, lace, embroidery, or other material. Invoices shall also contain a statement as to how the trimming is applied, that is, whether on the cuffs, collar, sleeves, or elsewhere, and the total value of each completed garment or article.

19 C.F.R. § 10.36 Commercial travelers' samples; professional equipment and tools of trade; theatrical effects and other articles.

(a) Samples accompanying a commercial traveler who presents an adequate descriptive list or a special CBP invoice, and professional equipment, tools of trade, and repair components for such equipment or tools imported in his baggage for his own use by a nonresident sojourning temporarily in the United States may be entered on the importer's baggage declaration in lieu of formal entry and examination and may be passed under subheadings 9813.00.20 or 9813.00.50, Harmonized Tariff Schedule of the United States, (HTSUS), at the place of arrival in the same manner as other passengers' baggage. The examination may be made by an inspector who is qualified, in the opinion of the port director, to determine the amount of the bond required by § 10.31(c) to be filed in support of the entry. If the articles are a commercial traveler's samples and exceed $500 in value, a special Customs invoice or a descriptive list shall be furnished. (b) When the proprietor or manager of a theatrical exhibition arriving from abroad who has entered his scenery, properties, and apparel under subheading 9817.00.98, HTSUS, contemplates side trips to a contiguous country with the exhibition within the period of time during which the merchandise may remain in the customs territory of the United States under bond, including any lawful extension, a copy of the entry covering the effects and a copy of a descriptive list of such effects or invoice furnished by him may be certified by the examining officer and returned to the proprietor or manager for use in registering the effects with the CBP officers at the port of exit, and in clearing them through CBP on his return. Cancellation of the bond shall be effected by exportation in accordance with the provisions of § 10.38 at the time the theatrical effects are finally taken out of the United States before the expiration of the period of time during which the merchandise may remain in the customs territory of the United States under bond, including any lawful extension. Similar treatment may be accorded articles entered under other subheadings in chapter 98, subchapter XIII, HTSUS, upon approval by Headquarters, U.S. Customs and Border Protection. (c) When a commercial traveler contemplates side trips to a contiguous country within the period of time during which the merchandise may remain in the customs territory of the United States under bond, including any lawful extension, a copy of his baggage declaration and a copy of the descriptive list or special CBP invoice furnished by him may be certified by the examining officer and returned to the traveler for use in registering the samples with CBP officers at the port of exit, and in clearing them through CBP upon his return. Cancellation of the bond shall be effected by exportation in accordance with the provisions of § 10.38 at the time the samples are finally taken out of the United States before the expiration of the period of time during which the merchandise may remain in the customs territory of the United States under bond, including any lawful extension. (d) The privilege of clearance of commercial travelers' samples or professional equipment, tools of trade, and repair components for such equipment or tools imported for his own use by a nonresident sojourning temporarily in the United States on a baggage declaration under bond without surety or cash deposit shall not be accorded to a commercial traveler or such nonresident who, through fraud or culpable negligence, has failed to comply with the provisions of such a bond in connection with a prior arrival.

19 C.F.R. § 10.36a a Vehicles, pleasure boats and aircraft brought in for repair or alteration.

(a) A vehicle (such as an automobile, truck, bus, motorcycle, tractor, trailer), pleasure boat, or aircraft brought into the United States by an operator of such vehicle, pleasure boat, or aircraft for repair or alteration (as defined in §§ 10.8, 10.490, 10.570, and 181.64 of this chapter) may be entered on the operator's baggage declaration, in lieu of formal entry and examination, and may be passed under subheading 9813.00.05, Harmonized Tariff Schedule of the United States (HTSUS), at the place of arrival in the same manner as passengers' baggage. When the vehicle, aircraft, or pleasure boat to be entered is being towed by or transported on another vehicle, the operator of the towing or transporting vehicle may make entry for the vehicle, aircraft or pleasure boat to be repaired or altered. The bond, prescribed by § 10.31(f), filed to support entry under this section shall be without surety or cash deposit except as provided by this paragraph and paragraph (d) of this section. The examination may be made by an inspector who is qualified to determine the amount of such bond to be filed in support of the entry. The privilege accorded by this paragraph shall not apply when two or more vehicles, pleasure boats, or aircraft are to be entered by the same importer under subheading 9813.00.05, HTSUS, at the same time. In that event, the importer must file a formal entry supported by bond with surety or cash deposit in lieu of surety. (b) Each vehicle, pleasure boat, or aircraft to which paragraph (a) of this section is applicable shall be identified on the operator's baggage declaration, which must include the data prescribed in paragraphs (a) and (e) of § 10.31. (c) Exportation shall be effected in accordance with the provisions of § 10.38. (d) The privilege of clearance of a vehicle, pleasure boat, or aircraft brought in by the operator of such vehicle, pleasure boat, or aircraft, for repair or alteration on his baggage declaration under bond without surety or cash deposit shall not be granted to an individual who has failed to comply with the provisions of such a bond in connection with any prior arrival. Such individual shall be required to file a formal entry under subheading 9813.00.05, HTSUS, with a bond supported by a surety or cash deposit in lieu of surety.

19 C.F.R. § 10.37 Extension of time for exportation.

The period of time during which merchandise entered under bond under chapter 98, subchapter XIII, Harmonized Tariff Schedule of the United States (19 U.S.C. 1202), may remain in the customs territory of the United States, may be extended for not more than two further periods of 1 year each, or such shorter period as may be appropriate. Extensions may be granted by the Center director upon written application on CBP form 3173, which may be submitted to CBP, either at the port of entry or electronically provided the articles have not been exported or destroyed before the receipt of the application, and liquidated damages have not been assessed under the bond before receipt of the application. Any untimely request for an extension of time for exportation shall be referred to the Director, Commercial and Trade Facilitation Division, Office of International Trade, CBP Headquarters, for disposition. Any request for relief from a liquidated damage assessment in excess of a Fines, Penalties, and Forfeitures Officer's delegated authority shall be referred to the Director, Border Security and Trade Compliance Division, Office of International Trade, CBP Headquarters, for disposition. No extension of the period for which a carnet is valid shall be granted.

19 C.F.R. § 10.38 Exportation.

(a) Articles entered under chapter 98, subchapter XIII, Harmonized Tariff Schedule of the United States (HTSUS) (19 U.S.C. 1202) may be exported at the port of entry or at another port. An application on Customs Form 3495 shall be filed in duplicate with the port director a sufficient length of time in advance of exportation to permit the examination and identification of the articles if circumstances warrant such action and, in such event, the applicant shall be notified on a copy of Customs Form 3495 where the articles are to be sent for identification. If a carnet was used for entry purposes, the reexportation voucher of the carnet shall be filed, in addition to Customs Form 3495, and the carnet shall be presented for certification. (b) All expenses in connection with the delivery of the articles for examination, the cording and sealing of such articles, and their transfer for exportation shall be paid by the parties in interest. (c) If exportation is to be made at a port other than the one at which the merchandise was entered, the application on Customs Form 3495 shall be filed in triplicate. There shall also be filed with the application a certified copy of the import entry or a certified copy of the invoice used on entry. (d) If the goods are examined at one port and are to be exported from another port, they shall be forwarded to the port of exportation under a transportation and exportation entry. In such cases Customs Form 3495 shall be filed in triplicate. Articles entered under a carnet shall not be examined elsewhere than at the port from which they are to be exported. (e) If the articles are to be exported by mail or parcel post, the package containing the articles must be mailed under Customs supervision after examination. Waiver of the right to withdraw the package from the mails shall be endorsed on each package to be so exported and signed by the exporter. (f) Whenever the circumstances warrant, and occasionally in any event, port directors shall cause the fact of exportation to be verified by the Office of Enforcement in harmony with the procedures provided for in §§ 18.7 and 191.61 of this chapter. (g) Upon the presentation of satisfactory evidence to the director of the port at which samples were entered under subheading 9813.00.20, HTSUS, or professional equipment or tools of trade were entered under subheading 9813.00.50, HTSUS, that such articles cannot be exported for the reason that they have been seized (other than by seizure at the suit of private persons), the requirement of exportation shall be suspended for the duration of the seizure. The articles shall be exported promptly after release from seizure.

19 C.F.R. § 10.39 Cancellation of bond charges.

(a) Charges against bonds taken pursuant to Chapter 98, Subchapter XIII, Harmonized Tariff Schedule of the United States, (HTSUS), may be canceled in the manner prescribed in § 113.55 of this chapter. A completed reexportation counterfoil on a carnet establishes that the articles covered by the carnet have been exported, and no claim shall be brought against the guaranteeing association under the carnet for failure to export, except under the provisions of § 114.26 of this chapter. In the case of articles entered under subheading 9813.00.30, HTSUS, which are destroyed because of their use for the purposes of importation, the bond charge shall not be canceled unless there is submitted to the Center director a certificate of the importer that the articles were destroyed during the course of a specifically described use, and the Center director is satisfied that the articles were so destroyed as articles of commerce within the period of time during which the articles may remain in the Customs territory of the United States under bond (including any lawful extension). Bonds covering articles entered under other provisions of law shall not be canceled upon proof of destruction, except as provided for in paragraph (c) of this section, unless the articles are destroyed under Customs supervision in accordance with section 557, Tariff Act of 1930, as amended, and § 158.43 of this chapter. (b) Where exportation has been made at a port other than the port of entry, the bond may be canceled upon the certificate of lading received from the port of exportation, showing that such exportation was made within the period of time during which the articles may remain in the Customs territory of the United States under bond. In addition, the Center director may require the production of a landing certificate signed by a revenue officer of the country to which the merchandise is exported. (c) When articles entered temporarily free of duty under bond are destroyed within the bond period by death, accidental fire, or other casualty, petition for relief from liability under the bond shall be made to the United States Customs Service. The petition shall be accompanied by a statement of the importer, or other person having knowledge of the facts, setting forth the circumstances of the destruction of the articles. (d)(1) If any article entered under Chapter 98, subchapter XIII, HTSUS, except those entered under a carnet, has not been exported or destroyed in accordance with the regulations in this part within the period of time during which the articles may remain in the Customs territory of the United States under bond (including any lawful extension), the Fines, Penalties, and Forfeitures Officer shall make a demand in writing under the bond for the payment of liquidated damages equal to double the estimated duties applicable to such entry, unless a different amount is prescribed by § 10.31(f). The demand shall include a statement that a written petition for relief from the payment of the full liquidated damages may be filed with the Fines, Penalties, and Forfeitures Officer within 60 days after the date of the demand. For purposes of this section, the term estimated duties shall include any merchandise processing fees applicable to such entry. (2) If articles entered under a carnet have not been exported or destroyed in accordance with the regulations in this part within the carnet period, the port director shall promptly after expiration of that period make demand in writing upon the importer and guaranteeing association for the payment of liquidated damages in the amount of 110 percent of the estimated duties on the articles not exported or destroyed. The guaranteeing association shall have a period of 6 months from the date of claim in which to furnish proof of the exportation or destruction of the articles under conditions set forth in the Convention or Agreement under which the carnet is issued. If such proof is not furnished within the 6-month period, the guaranteeing association shall forthwith pay the liquidated damages provided for above. The payment shall be refunded if the guaranteeing association within 3 months from the date of payment furnishes the proof referred to above. No claim for payment under a carnet covering a temporary importation may be made against the guaranteeing association more than 1 year after the expiration of the period for which the carnet was valid. (3) Demand for return to Customs custody. When the demand for return to Customs custody is made in the case of merchandise entered under Chapter 98, subchapter XIII, HTSUS (19 U.S.C. 1202), liquidated damages in an amount equal to double the estimated duties on the merchandise not returned shall be demanded, except that in the case of samples solely for use in taking orders, motion-picture advertising films, professional equipment, tools of trade, and repair components for professional equipment and tools of trade, the liquidated damages demanded shall be in an amount equal to 110 percent of the estimated duties. (e) If there has been a default with respect to any or all of the articles covered by the bond and a written petition for relief is filed as provided in part 172 of this chapter, it will be reviewed by the Fines, Penalties, and Forfeitures Officer having jurisdiction in the port where the entry was filed. If the Fines, Penalties, and Forfeitures Officer is satisfied that the importation was properly entered under Chapter 98, subchapter XIII, and that there was no intent to defraud the revenue or delay the payment of duty, the Fines, Penalties, and Forfeitures Officer may cancel the liability for the payment of liquidated damages in any case in his or her delegated authority as follows: (1) If evidence is furnished which satisfies the Fines, Penalties, and Forfeitures Officer that the article would have been entitled to free entry as domestic products exported and returned had the evidence been furnished at the time of entry, without the collection of liquidated damages. (2) If the article has been exported or destroyed under Customs supervision but not within the period of time during which the articles may remain in the Customs territory of the United States under bond, upon the payment of such lesser amount as the port director may deem appropriate under the law and in view of the circumstances, or without the collection of liquidated damages if the Fines, Penalties, and Forfeitures Officer is satisfied that the delay in exportation or destruction was for the benefit of the United States or was occasioned wholly by circumstances reasonably beyond the control of the parties concerned and which could not have been anticipated by a reasonably prudent person. (3) If the article was exported or destroyed within the period of time during which the articles may remain in the Customs territory of the United States under bond but not under Customs supervision and satisfactory documentary evidence of actual exportation, such as a foreign landing certificate, or of death or other complete destruction, such as a veterinarian's certificate or certificates of two disinterested witnesses, are furnished together with a complete explanation by the applicant of the failure to obtain Customs supervision, upon the payment of such lesser amount as the Fines, Penalties, and Forfeitures Officer may deem appropriate under the law and in view of the circumstances, or without the collection of liquidated damages if the port director is satisfied that the merchandise was destroyed under circumstances which precluded any arrangement to obtain Customs supervision. Satisfactory documentary evidence of exportation, in the case of carnets, would include the particulars regarding importation or reimportation entered in the carnet by the Customs authorities of another contracting party, or a certificate with respect to importation or reimportation issued by those authorities, based on the particulars shown on a voucher which was detached from the carnet on importation or reimportation into their territory, provided it is shown that the importation or reimportation took place after the exportation which it is intended to establish. (4) Upon the payment of an amount equal to double the duty which would have accrued on the articles had they been entered under an ordinary consumption entry, or equal to 110 percent of such duties where that percentage is prescribed in § 10.31(f), if such amount is determined to be less than the full amount of the bond. (f) Anticipatory breach. If an importer anticipates that the merchandise entered under a Temporary Importation Bond will not be exported or destroyed in accordance with the terms of the bond, the importer may indicate to Customs in writing before the bond period has expired of the anticipatory breach. At the time of written notification of the breach, the importer shall pay to Customs the full amount of liquidated damages that would be assessed at the time of breach of the bond, and the entry will be closed. The importer shall notify the surety in writing of the breach and payment. By this payment, the importer waives his right to receive a notice of claim for liquidated damages as required by § 172.1(a) of this chapter. (g) If the petitioner is not satisfied with the port director's action under this section and submits a supplemental petition, both the original and the supplemental petitions shall be transmitted to the designated Headquarters official with a full report on the case.

19 C.F.R. § 10.40 Refund of cash deposits.

(a) When a cash deposit is made in lieu of surety, it shall be refunded to the person in whose name the entry is made upon exportation in compliance with § 10.38. (b) If any article entered under Chapter 98, subchapter XIII, Harmonized Tariff Schedule of the United States, is not exported or destroyed within the period of time during which articles may remain in the customs territory of the United States under bond (including any lawful extension), the Center director shall notify the importer in writing that the entire cash deposit will be transferred to the regular account as liquidated damages unless a written application for relief from the payment of the full liquidated damages is filed with the Center director within 60 days after the date of the notice. If such an application is timely filed, the transfer of the cash deposit to the regular account as liquidated damages shall be deferred pending the decision of the Headquarters, U.S. Customs and Border Protection or, in appropriate cases, the Center director on the application.

19 C.F.R. § 10.78 Entry.

(a) No entry shall be required for fish or other marine products taken on the high seas by vessels of the U.S. or by residents of the U.S. in undocumented vessels owned in the U.S. when such fish or other products are brought into port by the taking vessel or are transferred at sea to another fishing vessel of the same fleet and brought into port. (b) An American fishery, within the meaning of Subchapter XV of Chapter 98, Harmonized Tariff Schedule of the United States, is defined as a fishing enterprise conducted under the American flag by vessels of the United States on the high seas or in foreign waters in which such vessels have the right by treaty or otherwise, to take fish or other marine products and may include a shore station operated in conjunction with such vessels by the owner or master thereof. (c) The employment of citizens of a foreign country by an American fishery is permissible but the purchase by an American fishery of fish or other marine products taken by citizens of a foreign country on the high seas or in foreign waters will subject such fish or other marine products to treatment as foreign merchandise. (d) Products of an American fishery shall be entitled to free entry although prepared, preserved, or otherwise changed in condition, provided the work is done at sea by the master or crew of the fishery or by persons employed by and under the supervision of the master or owner of the fishery. Fish (except cod, haddock, hake, pollock, cusk, mackerel, and swordfish) the product of an American fishery landed in a foreign country and there not further advanced than beheaded, eviscerated, packed in ice, frozen and with fins removed, shall be entitled to free entry, whether or not such processing is done by the American fishery. Products of an American fishery prepared or preserved on the treaty coasts of Newfoundland, Magdalen Islands, or Labrador, as such coasts are defined in the Convention of 1818 between the United States and Great Britain, shall be entitled to free entry only if the preparation or preservation is done by an American fishery.

19 C.F.R. § 10.11 General.

(a) Sections 10.12 through 10.23 set forth definitions and interpretative regulations adopted by the Commissioner of Customs pertaining to the construction of subheading 9802.00.80, Harmonized Tariff Schedule of the United States (19 U.S.C. 1202) and related provisions of law. These provisions concern claims for the exemption from duty provided by subheading 9802.00.80, Harmonized Tariff Schedule of the United States (19 U.S.C. 1202), for American-made fabricated components which are returned to the United States as parts of articles assembled abroad. The examples included in these sections describe specific situations in which the exemption may or may not be applicable. The definitions and regulations that follow are promulgated to inform the public of the constructions and interpretations that the United States Customs Service shall give to relevant statutory terms and to assure the impartial and uniform assessment of duties upon merchandise claimed to be partially exempt from duty under subheading 9802.00.80, Harmonized Tariff Schedule of the United States (19 U.S.C. 1202), at the various ports of entry. Nothing in these regulations purports or is intended to restrict the legal right of importers or others to a judicial review of the matters contained therein. (b) Section 10.24 sets forth the documentary requirements applicable to the entry of assembled articles claimed to be subject to the exemption provided under subheading 9802.00.80, Harmonized Tariff Schedule of the United States (19 U.S.C. 1202). Allowance of an importer's claim is dependent upon meeting the statutory requirements for the exemption under subheading 9802.00.80, Harmonized Tariff Schedule of the United States (19 U.S.C. 1202) and his complying with the documentary requirements set forth in § 10.24.

19 C.F.R. § 10.12 Definitions.

As used in §§ 10.11 through 10.24, the following terms shall have the meanings indicated: (a) American-made. The term “American-made” is used to refer to a product of the United States as defined in paragraph (e) of this section. (b) Assembly. “Assembly” means the fitting or joining together of fabricated components. (c) Exemption. “Exemption” means the deduction of the cost or value of products of the United States which were assembled abroad in accordance with the requirements of subheading 9802.00.80, Harmonized Tariff Schedule of the United States (19 U.S.C. 1202), from the full value of the assembled article. (d) Fabricated component. “Fabricated component” means a manufactured article ready for assembly in the condition as exported except for operations incidental to the assembly. (e) Product of the United States. A “product of the United States” is an article manufactured within the Customs territory of the United States and may consist wholly of United States components or materials, of United States and foreign components or materials, or wholly of foreign components or materials. If the article consists wholly or partially of foreign components or materials, the manufacturing process must be such that the foreign components or materials have been substantially transformed into a new and different article, or have been merged into a new and different article.

19 C.F.R. § 10.13 Statutory provision: Subheading 9802.00.80, Harmonized Tariff Schedule of the United States (19 U.S.C. 1202).

Subheading 9802.00.80, Harmonized Tariff Schedule of the United States (HTSUS), (19 U.S.C. 1202), provides that articles assembled abroad in whole or in part of fabricated components, the product of the United States, which (a) were exported in condition ready for assembly without further fabrication, (b) have not lost their physical identity in such articles by change in form, shape, or otherwise, and (c) have not been advanced in value or improved in condition abroad except by being assembled and except by operations incidental to the assembly process such as cleaning, lubricating, and painting, are subject to a duty upon the full value of the imported article, less the cost or, if no charge is made, the value of such products of the United States. The rate of duty which is assessed upon the dutiable portion of the imported article is that which is applicable to the imported article as a whole under the appropriate provision of the HTSUS (19 U.S.C. 1202) for such article. If that provision requires a specific or compound rate of duty, the total duties assessed on the imported article are reduced in such proportion as the cost or value of the returned United States components which qualify for the exemption bears to the full value of the assembled article.

19 C.F.R. § 10.14 Fabricated components subject to the exemption.

(a) Fabricated components, the product of the United States. Except as provided in § 10.15, the exemption provided under subheading 9802.00.80, Harmonized Tariff Schedule of the United States (HTSUS) (19 U.S.C. 1202), applies to fabricated components, the product of the United States. The components must be in condition ready for assembly without further fabrication at the time of their exportation from the United States to qualify for the exemption. Components will not lose their entitlement to the exemption by being subjected to operations incidental to the assembly either before, during, or after their assembly with other components. Materials undefined in final dimensions and shapes, which are cut into specific shapes or patterns abroad are not considered fabricated components. (b) Substantial transformation of foreign-made articles or materials. Foreign-made articles or materials may become products of the United States if they undergo a process of manufacture in the United States which results in their substantial transformation. Substantial transformation occurs when, as a result of manufacturing processes, a new and different article emerges, having a distinctive name, character, or use, which is different from that originally possessed by the article or material before being subject to the manufacturing process. The mere finishing or modification of a partially or nearly complete foreign product in the United States will not result in the substantial transformation of such product and it remains the product of a foreign country.

19 C.F.R. § 10.15 Fabricated components not subject to the exemption.

Fabricated components which are not products of the United States are excluded from the exemption. In addition, the exemption is not applicable to any component exported from the Customs territory of the United States: (a) From continuous Customs custody with remission, abatement, or refund of duty; (b) With benefit of drawback; (c) To comply with any law of the United States or regulation of any Federal agency requiring exportation; or (d) After manufacture or production in the United States under subheading 9813.00.05, HTSUS (19 U.S.C. 1202).

19 C.F.R. § 10.16 Assembly abroad.

(a) Assembly operations. The assembly operations performed abroad may consist of any method used to join or fit together solid components, such as welding, soldering, riveting, force fitting, gluing, laminating, sewing, or the use of fasteners, and may be preceded, accompanied, or followed by operations incidental to the assembly as illustrated in paragraph (b) of this section. The mixing or combining of liquids, gases, chemicals, food ingredients, and amorphous solids with each other or with solid components is not regarded as an assembly. (b) Operations incidental to the assembly process. Operations incidental to the assembly process whether performed before, during, or after assembly, do not constitute further fabrication, and will not preclude the application of the exemption. The following are examples of operations which are incidental to the assembly process: (1) Cleaning; (2) Removal of rust, grease, paint, or other preservative coating; (3) Application of paint or preservative coating, including preservative metallic coating, lubricants, or protective encapsulation; (4) Trimming, filing, or cutting off of small amounts of excess materials; (5) Adjustments in the shape or form of a component to the extent required by the assembly being performed abroad; (6) Cutting to length of wire, thread, tape, foil, and similar products exported in continuous length; separation by cutting of finished components, such as prestamped integrated circuit lead frames exported in multiple unit strips; and (7) Final calibration, testing, marking, sorting, pressing, and folding of assembled articles. (c) Operations not incidental to the assembly process. Any significant process, operation, or treatment other than assembly whose primary purpose is the fabrication, completion, physical or chemical improvement of a component, or which is not related to the assembly process, whether or not it effects a substantial transformation of the article, will not be regarded as incidental to the assembly and will preclude the application of the exemption to such article. The following are examples of operations not considered incidental to the assembly as provided under subheading 9802.00.80, Harmonized Tariff Schedule of the United States (19 U.S.C. 1202): (1) Melting of exported ingots and pouring of the metal into molds to produce cast metal parts; (2) Cutting of garment parts according to pattern from exported material; (3) Chemical treatment of components or assembled articles to impart new characteristics, such as showerproofing, permapressing, sanforizing, dying or bleaching of textiles; (4) Machining, polishing, burnishing, peening, plating (other than plating incidental to the assembly), embossing, pressing, stamping, extruding, drawing, annealing, tempering, case hardening, and any other operation, treatment or process which imparts significant new characteristics or qualities to the article affected. (d) Joining of American-made and foreign-made components. An assembly operation may involve the use of American-made components and foreign-made components. The various requirements for establishing entitlement to the exemption apply only to the American-made components of the assembly. (e) Subassembly. An assembly operation may involve the joining or fitting of American-made components into a part or subassembly of an article, followed by the installation of the part or subassembly into the complete article. (f) Packing. The packing abroad of merchandise into containers does not in itself qualify either the containers or their contents for the exemption. However, assembled articles which otherwise qualify for the exemption and which are packaged abroad following their assembly will not be disqualified from the exemption by reason of their having been so packaged, whether for retail sale or for bulk shipment. The tariff status of the packing materials or containers will be determined in accordance with General Rule of Interpretation 5, HTSUS (19 U.S.C. 1202).

19 C.F.R. § 10.17 Valuation of exempted components.

The value of fabricated components to be subtracted from the full value of the assembled article is the cost of the components when last purchased, f.o.b. United States port of exportation or point of border crossing as set out in the invoice and entry papers, or, if no purchase was made, the value of the components at the time of their shipment for exportation, f.o.b. United States port of exportation or point of border crossing, as set out in the invoice and entry papers. However, if the appraising officer concludes that the cost or value of the fabricated components so ascertained does not represent a reasonable cost or value, then the value of the components shall be determined in accordance with section 402 or section 402a, Tariff Act of 1930, as amended (19 U.S.C. 1401a, 1402).

19 C.F.R. § 10.18 Valuation of assembled articles.

As in the case of the appraisement of any other import merchandise (see subpart C of part 152 of this chapter), the full value of assembled articles imported under subheading 9802.00.80, Harmonized Tariff Schedule of the United States (HTSUS) (19 U.S.C. 1202), is determined in accordance with 19 CFR 152.100 et seq.

19 C.F.R. § 10.21 Updating cost data and other information.

When a claim for the exemption is predicated on estimated cost data furnished either in advance of or at the time of entry, this fact should be clearly stated in writing at the time of entry, and suspension of liquidation may be requested by the importer or his agent pending the furnishing of actual cost data. Actual cost data must be submitted as soon as accounting procedures permit. To insure that information used for Customs purposes is reasonably current, the importer shall ordinarily be required to furnish updated cost and assembly data at least every six months, regardless of whether he considers that significant changes have occurred. The 6-month period for the submission of updated cost or other data may be extended by the Center director if such extension is appropriate for the type of merchandise involved, or because of the accounting period normally used in the trade, or because of other relevant circumstances.

19 C.F.R. § 10.23 Standards, quotas, and visas.

All requirements and restrictions applicable to imported merchandise, such as labeling, radiation standards, flame-retarding properties, quotas, and visas, apply to assembled articles eligible for the exemption in the same manner as they would apply to all other imported merchandise.

19 C.F.R. § 10.24 Documentation.

(a) Documents required. The following documents shall be filed in connection with the entry of assembled articles claimed to be subject to the exemption under subheading 9802.00.80, Harmonized Tariff Schedule of the United States (HTSUS) (19 U.S.C. 1202). (1) Declaration by the assembler. A declaration by the person who performed the assembly operations abroad shall be filed in substantially the following form: (2) Endorsement by the importer. An endorsement, in substantially the following form, shall be signed by the importer: (b) Revision of format. In specific cases, the Center director may revise the format of either of the documents specified in paragraph (a) of this section and may make such changes as conditions warrant, provided the data and information required to be supplied in these documents are presented. For example, if the components were furnished by the importer, the information on components may be supplied as part of the importer's endorsement, rather than as part of the assembler's declaration. (c) Reference to previously filed documents. In lieu of filing duplicate lists of components and descriptions of assembly operations with each entry, the documents specified in paragraph (a) of this section may refer to assembly descriptions and lists of components previously filed with and approved by the Center director, or to records showing costs, names of manufacturers, and other necessary data on components, provided the importer has arranged with the Center director to maintain such records and keep them available for examination by authorized Customs officers. (d) Waiver of specific details for each entry. There are cases where large quantities of United States components are purchased from various sources or exported at various ports and dates on a continuing basis, so that it is impractical to identify the exact source, port and date of export for each particular component included in an entry of merchandise claimed to be subject to the exemption under subheading 9802.00.80, HTSUS (19 U.S.C. 1202). In these cases, specific details such as the port and date of export and the name of the manufacturer of the United States components may be waived if the Center director is satisfied that the importer and assembler have established reliable controls to insure that all components for which the exemption is claimed are in fact products of the United States. These controls shall include strict physical segregation of United States and foreign components, as well as records of United States components showing quantities, sources, costs, dates shipped abroad, and other necessary information. These records shall be maintained by the importer and assembler for 5 years from the date of the released entry in a manner so that they are readily available for audit, inspection, copying, reproduction or other official use by authorized Customs officers. (e) Waiver of documents. When the Center director is satisfied that unusual circumstances make the production of either or both of the documents specified in paragraph (a) of this section, or of any of the information set forth therein, impractical and is further satisfied that the requirements of subheading 9802.00.80, HTSUS, and related legal notes have been met, he may waive the production of such document(s) or information. (f) Unavailability of documents at time of entry. If either or both of the documents specified in paragraph (a) of this section are not available at the time of entry, a bond on Customs Form 301 containing the bond conditions set forth in § 113.62 of this chapter for the production of the document(s) may be given pursuant to §§ 113.41-113.46 and 141.66 of this chapter. (g) Responsibility of correctness. Subject to the civil and criminal sanctions provided by law for false or fraudulent entries, the importer has the ultimate responsibility for supplying all information needed by the Customs Service to process an entry, and for the completeness and truthfulness of such information. If certain information cannot be supplied by the assembler, it must be provided by the importer. I, __________, declare that to the best of my knowledge and belief the __________ were assembled in whole or in part from fabricated components listed and described below, which are products of the United States: Marks of identification, numbers Description of component Quantity Unit value at time and place of export from United States 1 Port and date of export from United States Name and address of manufacturer 1 In accordance with U.S. Note 4 to Subchapter II of Chapter 98, Harmonized Tariff Schedule of the United States (19 U.S.C. 1202). Description of the operations performed abroad on the exported components (in sufficient detail to enable Customs officers to determine whether the operations performed are within the preview of subheading 9802.00.80, Harmonized Tariff Schedule of the United States (19 U.S.C. 1202) (attach supplemental sheet if more space is required)): Date Signature Address Capacity I declare that to the best of my knowledge and belief the (above), (attached) declaration, and any other information submitted herewith, or otherwise supplied or referred to, is correct in every respect and there has been compliance with all pertinent legal notes to the Harmonized Tariff Schedule of the United States (19 U.S.C. 1202). Date Signature Address Capacity

19 C.F.R. § 10.25 Textile components cut to shape in the United States and assembled abroad.

Where a textile component is cut to shape (but not to length, width, or both) in the United States from foreign fabric and exported to another country, territory, or insular possession for assembly into an article that is then returned to the United States and entered, or withdrawn from warehouse, for consumption on or after July 1, 1996, the value of the textile component shall not be included in the dutiable value of the article. For purposes of determining whether a reduction in the dutiable value of an imported article may be allowed under this section: (a) The terms “textile component” and “fabric” have reference only to goods covered by the definition of “textile or apparel product” set forth in § 102.21(b)(5) of this chapter; (b) The operations performed abroad on the textile component shall conform to the requirements and examples set forth in § 10.16 insofar as they may be applicable to a textile component; and (c) The valuation and documentation provisions of §§ 10.17, 10.18, 10.21 and 10.24 shall apply.

19 C.F.R. § 10.26 Articles assembled or processed in a beneficiary country in whole of U.S. components or ingredients; articles assembled in a beneficiary country from textile components cut to shape in the United States.

(a) No article (except a textile article, apparel article, or petroleum, or any product derived from petroleum, provided for in heading 2709 or 2710, Harmonized Tariff Schedule of the United States (HTSUS)) shall be treated as a foreign article or as subject to duty: (1) If the article is assembled or processed in a beneficiary country in whole of fabricated components that are a product of the United States; or (2) If the article is processed in a beneficiary country in whole of ingredients (other than water) that are a product of the United States; and (3) Neither the fabricated components, materials or ingredients after their exportation from the United States, nor the article before its importation into the United States, enters into the commerce of any foreign country other than a beneficiary country. (b) No article (except a textile or apparel product) entered, or withdrawn from warehouse, for consumption on or after July 1, 1996, shall be treated as a foreign article or as subject to duty: (1) If the article is assembled in a beneficiary country in whole of textile components cut to shape (but not to length, width, or both) in the United States from foreign fabric; or (2) If the article is assembled in a beneficiary country in whole of both textile components described in paragraph (b)(1) of this section and components that are products of the United States; and (3) Neither the components after their exportation from the United States, nor the article before its importation into the United States, enters into the commerce of any foreign country other than a beneficiary country. (c) For purposes of this section: (1) The terms “textile article”, “apparel article”, and “textile or apparel product” cover all articles, other than footwear and parts of footwear, that are classifiable in an HTSUS subheading which carries a textile and apparel category number designation; (2) The term “beneficiary country” has the meaning set forth in § 10.191(b)(1); and (3) A component, material, ingredient, or article shall be deemed to have not entered into the commerce of any foreign country other than a beneficiary country if: (i) The component, material, or ingredient was shipped directly from the United States to a beneficiary country, or the article was shipped directly to the United States from a beneficiary country, without passing through the territory of any non-beneficiary country; or (ii) Where the component, material, ingredient, or article passed through the territory of a non-beneficiary country while en route to a beneficiary country or the United States: (A) The invoices, bills of lading, and other shipping documents pertaining to the component, material, ingredient, or article show a beneficiary country or the United States as the final destination and the component, material, ingredient, or article was neither sold at wholesale or retail nor subjected to any processing or other operation in the non-beneficiary country; or (B) The component, material, ingredient, or article remained under the control of the customs authority of the non-beneficiary country and was not subjected to operations in that non-beneficiary country other than loading and unloading and activities necessary to preserve the component, material, ingredient, or article in good condition.

19 C.F.R. § 10.41 Instruments; exceptions.

(a) Locomotives and other railroad equipment, trucks, buses, taxicabs, and other vehicles used in international traffic shall be subject to the treatment provided for in part 123 of this chapter. (b) [Reserved] (c) Foreign-owned aircraft arriving in the United States shall be subject to the treatment provided for in part 122 of this chapter, unless entered under the provisions of §§ 10.31, 10.183, or paragraph (d) of this section. (d) Any foreign-owned locomotive or other railroad equipment, truck, bus, taxicab, or other vehicle, aircraft, or undocumented boat brought into the United States for the purpose of carrying merchandise or passengers between points in the United States for hire or as an element of a commercial transaction, except as provided at §§ 123.12 (a) and (b), 123.14(c), and 141.4(b)(4), is subject to treatment as an importation of merchandise from a foreign country and a regular entry for such vehicle, aircraft or boat will be made. The use of any such vehicle, aircraft, or boat without a proper entry having been made may result in liabilities being incurred under section 592, Tariff Act of 1930, as amended (19 U.S.C. 1592). (e) [Reserved] (f) Material for the maintenance or repair of international cables under the high seas, if requiring storage in special tanks for preservation, may be placed in tanks specially bonded for the purpose and withdrawn therefrom for high-seas installation without the payment of duty and without limitation of the storage period to the usual 3-year warehousing period. International cables laid under the territorial waters of the United States but not brought on shore in the United States shall be admitted without entry or the payment of duty. With respect to international cables laid under the territorial waters of the United States but brought on shore in the United States, only that part of the cable in the United States between the point of entry into the territorial waters of the United States and the first point of support on land in the United States shall be admitted without the payment of duty.

19 C.F.R. § 10.41a a Lift vans, cargo vans, shipping tanks, skids, pallets, and similar instruments of international traffic; repair components.

(a)(1) Lift vans, cargo vans, shipping tanks, skids, pallets, caul boards, and cores for textile fabrics, arriving (whether loaded or empty) in use or to be used in the shipment of merchandise in international traffic are hereby designated as “instruments of international traffic” within the meaning of section 322(a), Tariff Act of 1930, as amended. The Commissioner of Customs is authorized to designate as instruments of international traffic, in decisions to be published in the weekly Customs Bulletin, such additional articles or classes of articles as he shall find should be so designated. Such instruments may be released without entry or the payment of duty, subject to the provisions of this section. (2) Repair components, accessories, and equipment for any container of foreign production which is an instrument of international traffic may be entered or withdrawn from warehouse for consumption without the deposit of duty if the person making the entry or withdrawal from warehouse files a declaration that the repair component was imported to be used in the repair of a container of foreign production which is an instrument of international traffic, or that the accessory or equipment is for a container of foreign production which is an instrument of international traffic. The Center director must be satisfied that the importer of the repair component, accessory, or equipment had the declared intention at the time of importation. (3) As used in this section, “instruments of international traffic” includes the normal accessories and equipment imported with any such instrument which is a “container” as defined in Article 1 of the Customs Convention on Containers. (b) The reexportation of a container, as defined in Article 1 of the Customs Convention on Containers, which has become badly damaged, shall not be required in the case of a duly authenticated accident if the container (1) is subjected to applicable import duties and import taxes, or (2) is abandoned free of all expense to the Government or destroyed under Customs supervision at the expense of the parties concerned, following the procedure outlined in § 158.43(c) of this chapter. Any salvaged parts and materials shall be subjected to applicable import duties and import taxes. Replaced parts which are not reexported shall be subjected to import duties and import taxes except where abandoned free of expense to the Government or destroyed under Customs supervision at the expense of the parties concerned. (c) The instruments of international traffic designated in paragraph (a) of this section may be released in accordance with the provisions of that paragraph only after the applicant for such release has filed a bond on Customs Form 301, containing the bond conditions set forth in § 113.66 of this chapter. The required application may be filed at the port of arrival or at a subsequent port to which an instrument shall have been transported in bond or to which a container shall have been moved under cover of a TIR carnet (see part 114 of this chapter) showing the characteristics and value of the container on the Goods Manifest of the carnet. If the container is listed on the Goods Manifest of the carnet, the application may be filed at the port of arrival or at the subsequent port. If the container is not listed on the Goods Manifest, the application shall be filed at the port of arrival. When the application is filed at a port other than the port at which the bond is on file, the following procedure applies: (1) When the application is filed before the fact of approval of the applicant's bond has been established, the applicant must submit with the application, or the Customs officer to whom the application is made must obtain, evidence that a current bond is on file at another port. That evidence may consist of a certified copy of the bond, or any other evidence which will satisfy the Customs officer to whom the application is made that a current bond is on file at another port. (2) If the application is filed after the fact of approval of the applicant's bond has been established, a certified copy of that bond need not be filed at the port of release. Upon determination by the appropriate Customs officer that the fact of approval of the applicant's bond has been established, and the bond has not been subsequently discontinued, the instruments of international traffic will be released as provided for in paragraph (a) of this section. (3) Upon the request of the applicant, the appropriate Customs officer at the port at which the instruments of international traffic are to be released will determine whether or not the fact of approval of the applicant's bond has been established. If the approval has not been established, the Customs officer with whom the application has been filed will advise the applicant of the nature of the evidence required to establish the fact that a current bond is on file at another port. (d) If an instrument of foreign origin, or of United States origin which has been increased in value or improved in condition by a process of manufacture or other means while abroad, is released under this section and is subsequently diverted to point-to-point local traffic within the United States, or is otherwise withdrawn in the United States from its use as an instrument of international traffic, it becomes subject to entry and the payment of any applicable duties. An instrument of United States origin which has not been increased in value or improved in condition by a process of manufacture or other means while abroad and which is released under this section shall not be subject to entry or the payment of duty if it is so diverted or otherwise withdrawn. (e) The person who filed the application for release under paragraph (a)(1) of this section shall promptly notify a director of a port of entry in the United States as defined in Section 401(k), Tariff Act of 1930, as amended, (1) that the container is to be abandoned or destroyed, as described in paragraph (b) of this section, or (2) that the instrument is the subject of a diversion or withdrawal as described in paragraph (d) of this section, in which event he shall file with CBP, either at the port of entry or electronically a consumption entry for the instrument and pay all import duties and import taxes due on the container or instrument at the rate or rates in effect and in its condition on the date of such diversion or withdrawal. (f)(1) Except as provided in paragraph (j) of this section, an instrument of international traffic (other than a container as defined in Article 1 of the Customs Convention on Containers that is governed by paragraphs (g) (1)-(3) of this section) may be used as follows in point-to-point traffic, provided such traffic is incidental to the efficient and economical utilization of the instrument in the course of its use in international traffic: (i) Picking up and delivering loads at intervening points in the United States while en route between the port of arrival and the point of destination of its imported cargo; or (ii) Picking up and delivering loads at intervening points in the United States while en route from the point of destination of imported cargo to a point where export cargo is to be loaded or to an exterior port of departure by a reasonably direct route to, or nearer to, the place of such loading or departure. (2) Neither use as enumerated in paragraph (f)(1)(i) or (ii) of this section constitutes a diversion to unpermitted point-to-point local traffic within the United States or a withdrawal of an instrument in the United States from its use as an instrument of international traffic under this section. (g)(1) Except as provided in paragraph (j) of this section, a container (as defined in Article 1 of the Customs Convention on Containers) that is designated as an instrument of international traffic is deemed to remain in international traffic provided that the container exits the U.S. within 365 days of the date on that it was admitted under this section. An exit from the U.S. in this context means a movement across the border of the United States into a foreign country where either: (i) All merchandise is unladen from the container; or (ii) Merchandise is laden aboard the container (if the container is empty). (2) The person who filed the application for release under paragraph (a)(1) of this section is responsible for keeping and maintaining such records, otherwise generated and retained in the ordinary course of business, as may be necessary to establish the international movements of the containers. Such records shall be made available for inspection by Customs officials upon reasonable notice. (3) If the container does not exit the U.S. within 365 days of the date on which it is admitted under this section, such container shall be considered to have been removed from international traffic, and entry for consumption must be made within 10 business days after the end of the month in which the container is deemed removed from international traffic. When entry is required under this section, any containers considered removed from international traffic in the same month may be listed on one entry. Such entry may be made at any port of entry. Under 19 U.S.C. 1484(a)(1)(B), the importer of record is required, using reasonable care, to complete the entry by filing with Customs the declared value, classification and rate of duty applicable to the merchandise. The importer of record must use the value of the container as determined in accordance with section 402, Tariff Act of 1930 (19 U.S.C. 1401a), as amended by the Trade Agreements Act of 1979 (TAA). (h) For failure promptly to report the diversion or withdrawal or promptly to make the required entry and pay the duties due, the applicant shall be liable for the payment of liquidated damages equal to the domestic value of the instrument established in accordance with Section 606, Tariff Act of 1930. (i) When an instrument of international traffic, as provided in paragraph (a) of this section, is returned to the United States and released in accordance with the provisions of that paragraph, any repairs which may have been made to the instrument while it was abroad are not subject to entry or the payment of duty whether the instrument is of foreign or domestic manufacture, whether it left the United States empty or loaded, and whether or not the repairs made abroad were in contemplation when the instrument left the United States. (j) Containers and other articles designated as instruments of international traffic in accordance with this section are nevertheless subject to the application of the coastwise laws of the United States, with particular reference to Section 883, Title 46, United States Code (see § 4.93 of this chapter).

19 C.F.R. § 10.41b b Clearance of serially numbered substantial holders or outer containers.

(a) The holders and containers described in this section may be released without entry or the payment of duty, subject to the provisions of this section. (b) Subject to the approval of a port director pursuant to the procedures described in this paragraph, certain foreign- or U.S.-made shipping devices arriving from Canada or Mexico, including racks, holders, pallets, totes, boxes and cans, need not be serially numbered or marked if they are always transported on or within either intermodal and similar containers or containers which are themselves vehicles or vehicle appurtenances and accessories such as twenty and forty foot containers of general use and “igloo” air freight containers. The following or similar notation shall appear on the vehicle or vessel manifest in relation to such shipping devices which are exempt from serial numbering or marking requirements pursuant to this paragraph: “The shipping devices transported herein, which are not serially numbered or marked, have been exempted from such requirement pursuant to an application approved under 19 CFR 10.41b(b).” Also, pallets and other solid wood shipping devices must be accompanied by an importer document, to the extent that this is required by the U.S. Department of Agriculture, Animal and Plant Health Inspection Service, attesting to the admissibility of such devices as regards plant pest risk, as provided for in 7 CFR 319.40-3. (1) An importer or his agent, regardless of whether the importer is the owner of the foreign- or U.S.-manufactured shipping devices, may apply to a port director of Customs at one of the importer's chiefly utilized Customs ports or the port within which the importer's or agent's recordkeeping center is located for permission to have such shipping devices arriving from Canada or Mexico released without entry and payment of duty at the time of arrival and without the devices being serially numbered or marked. Application may be filed in only one port. Although no particular format is specified for the application, it must contain the information enumerated in paragraph (b)(2) of this section. Any duty which may be due on these shipping devices shall be tendered and paid cumulatively at the time specified in an approved application, which may be either before or after the arrival of the shipping devices in the U.S. (such as, at the time a contract, purchase order or lease agreement is issued). (2) The application shall: (i) Describe the types of shipping devices covered, their classification under the Harmonized Tariff Schedule of the U.S. (HTSUS), their countries of origin, and whether and to whom required duty was paid for them or when it will be paid for them, including duties for repair and modifications to such shipping devices while outside the U.S.; (ii) Identify the intended ports where it is anticipated the shipping devices will be arriving and departing the U.S., as well as the particular movements and conveyances in which they are intended to be utilized; (iii) Describe the applicant's proposed program for accounting for and reporting these shipping devices; (iv) Identify the reporting period (which shall in no event be less frequent than annual), as well as the payment period within which applicable duty and fees must be tendered (which shall in no event exceed 90 days following the close of the related reporting period); (v) Describe the type of inventory control and recordkeeping, including the specific records, to be maintained to support the reports of the shipping devices; and (vi) Provide the location in the United States, including the name and address, where the records supporting the reports will be retained by law and will be made available for inspection and audit upon reasonable notice. (The records supporting the reports of the shipping devices must be kept for a period of at least 3 years from the date such reports are filed with the port director.) (3) The application shall be filed along with a continuous bond containing the conditions set forth in § 113.66(c) of this chapter. If the application is approved by the port director and the conditions set forth in the application or of the bond are violated, the port director may issue a claim for liquidated damages equal to the domestic value of the container. If the domestic value exceeds the amount of the bond, the claim for liquidated damages will be equal to the amount of the bond. (4) The port director receiving the application shall evaluate the program proposed to account for, report and maintain records of the shipping devices. The port director may suggest amendments to the applicant's proposal. The port director shall notify the applicant in writing of his decision on the application within 90 days of its receipt, unless this period is extended for good cause and the applicant is so informed in writing. Approval of the application by the port director with whom it is filed shall be binding on all Customs ports nationwide. (5) If the decision is to deny the application, in whole or in part, the port director shall specify the reason for the denial in a written reply, and inform the applicant that such denial may be appealed to the Assistant Commissioner, Office of Field Operations, Customs Headquarters, within 21 days of its date. The Assistant Commissioner's decision shall be issued, in writing, within 30 days of the receipt of the appeal, and shall constitute the final Customs determination concerning the application. (6) If the application is approved, an importer may later apply to amend his application to add or delete particular types of shipping devices listed in the application in which the procedures set forth in the application may be utilized. If a requested amendment to an approved application should be denied, or if an approved application should be revoked, in whole or in part, by the port director, the procedures described in paragraph (b)(5) of this section shall apply. (7) Application for and approval of a reporting program shall not limit or restrict the use of other alternative means for obtaining the release of holders, containers and shipping devices. (c) In the case of serially numbered holders or containers of United States manufacture for which free clearance under subheading 9801.00.10, Harmonized Tariff Schedule of the United States, is claimed, the owner shall place thereon the following markings: (1) 9801.00.10, unless the holder or container has permanently attached thereto the manufacturer's metal tag or plate showing, among other things, the name and address of the manufacturer who is located in the United States. (2) The name of the owner, either positioned as indicated in the example below, or elsewhere conspicuously shown on the holder or container. (3) The serial number assigned by the owner, which shall be one of consecutive numbers and not to be duplicated. For example: 9801.00.10 * * * Zenda * * * 2468. (d)(1) In the case of serially numbered holders or containers of foreign manufacture, other than those provided for in paragraph (d)(2) of this section, for which free clearance under the second provision in subheading 9803.00.50, HTSUS (19 U.S.C. 1202), is claimed, the owner shall place thereon the following markings: (i) 9803.00.50. (ii) The district and port code numbers of the port of entry, the entry number, and the last two digits of the fiscal year of entry covering the importation of the holders and containers on which duty was paid. (iii) The name of the owner, either positioned as indicated in the example below, or elsewhere conspicuously shown on the holder or container. (iv) The serial number assigned by the owner, which shall be one of consecutive numbers and not to be duplicated. For example: 9803.00.50 * * * 10-1-366-63 * * * Zenda * * * 2468. (2) In the case of substantial holders or containers of either U.S. or foreign manufacture, specially designed and equipped to facilitate the carriage of goods by one or more modes of transport without intermediate reloading, each having a gross mass rating of at least 18,120 kilograms, for which duty-free entry is requested under either the first or the second proviso in subheading 9803.00.50, HTSUS (19 U.S.C. 1202), is claimed, only the following clear, conspicuous and durable markings are required to be on the container: (i) The identity of the owner or operator of the container. (ii) The serial number assigned by the owner or operator of the container, which shall be one of consecutive numbers and shall not be duplicated. (e) The prescribed markings shall be clear and conspicuous, that is, they shall appear on an exposed side of the holder or container in letters and figures of such size as to be readily discernible. The markings will be stricken out or removed when the holders or containers are taken out of service or when ownership is transferred, except that appropriate changes may be made if a new owner wishes to use the holders and containers under this procedure. (f) The owner shall keep adequate records open to inspection by Customs officers, which shall show the current status of the serially numbered holders and containers in service and the disposition made of such holders and containers taken out of service. (g) Nothing in this procedure shall be deemed to affect: (1) The requirements for outward or inward manifesting of such holders or containers. The manifests will show for each holder or container its markings as provided for herein. (2) The requirements of the Department of Commerce on exportation with respect to the filing of Electronic Export Information (EEI). (3) The treatment of articles covered herein under the coastwise laws of the United States, with particular reference to section 883, Title 46, United States Code. (h) If the holder or container and its contents are to move in bond or under cover of a TIR carnet (see part 114 of this chapter) from the port of arrival intact, the holder or container shall appear on the inward foreign manifest so as to be related to the cargo contained therein and will be released under this procedure at a subsequent port. If the holder or container is to move in bond or under cover of a TIR carnet from the port of arrival not intact with its contents, the holder or container may appear on the inward foreign manifest separate from and not related to the cargo contained therein and will be released under this procedure at the port of arrival before it moves forward and will not appear on the in-bond document. (i) A continuous bond containing the conditions set forth in § 113.66 of this chapter shall be filed with the port director. If the conditions are violated the port director shall issue a claim for liquidated damages equal to the domestic value of the holder or container established in accordance with section 606, Tariff Act of 1930, as amended (19 U.S.C. 1606). If the domestic value exceeds the amount of the bond the claim for liquidated damages will be equal to the amount of the bond.

19 C.F.R. § 10.151 Importations not over $800.

Subject to the conditions in § 10.153 of this part, the port director shall pass free of duty and tax any shipment of merchandise, as defined in § 101.1 of this chapter, imported by one person on one day having a fair retail value, as evidenced by an oral declaration or the bill of lading (or other document filed as the entry) or manifest listing each bill of lading, in the country of shipment not exceeding $800, unless he has reason to believe that the shipment is one of several lots covered by a single order or contract and that it was sent separately for the express purpose of securing free entry therefor or of avoiding compliance with any pertinent law or regulation. Merchandise subject to this exemption shall be entered under the informal entry procedures (see subpart C, part 143, and §§ 128.24, 145.31, 148.12, and 148.62, of this chapter).

19 C.F.R. § 10.152 Bona-fide gifts.

Subject to the conditions in § 10.153 of this part, the port director shall pass free of duty and tax any article sent as a bona-fide gift from a person in a foreign country to a person in the United States, provided that the aggregate fair retail value in the country of shipment of such articles received by one person on one day does not exceed $100 or, in the case of articles sent from a person in the Virgin Islands, Guam, and American Samoa, $200. Articles subject to this exemption shall be entered under the informal entry procedures (see subpart C, part 143, and §§ 145.32, 148.12, 148.51, and 148.64, of this chapter). An article is “sent” for purposes of this section if it is conveyed in any manner other than on the person or in the accompanied or unaccompanied baggage of the donor or donee.

19 C.F.R. § 10.153 Conditions for exemption.

Customs officers shall be further guided as follows in determining whether an article or parcel shall be exempted from duty and tax under § 10.151 or § 10.152: (a) A “bona fide gift” for purposes of § 10.152 is an article formerly owned by a donor (may be a commercial firm) who gave it outright in its entirety to a donee without compensation or promise of compensation. It does not include articles acquired by purchase, barter, promissory exchange, or similar transaction, nor does it include articles said to be “given” in conjunction with a purchase, barter, promissory exchange, or similar transaction, such as a so-called bonus article. (b) A parcel addressed to a person in the United States from an individual in a foreign country which contains a gift should be clearly marked on the outside to indicate that it contains a gift. Such marking is not conclusive evidence of a gift nor is the absence of such marking conclusive evidence that an article is not a gift. Ordinarily an article not exceeding $100 in fair retail value in the country of shipment sent from a person in a foreign country to a person in the United States ($200, in the case of an article sent from a person in the Virgin Islands, Guam, and American Samoa) will be recognizable as a gift from the nature of the article and obvious facts surrounding the shipment. (c) A parcel addressed to a person in the United States from a business firm in a foreign country would ordinarily not contain a gift from a donor in the foreign country. When such a parcel in fact contains an article entitled to free entry under § 10.152, the parcel should be clearly marked to indicate that it contains such a gift and a statement to this effect should be enclosed in the parcel. (d) Consolidated shipments addressed to one consignee shall be treated for purposes of §§ 10.151 and 10.152 as one importation. The foregoing shall not apply to shipments of bona fide gifts consolidated abroad for shipment to the United States when: (1) The consolidation for shipment to the United States is in a cargo van or similar containerization which is consigned to a common carrier, freight forwarder, freight handler, or other public service agency for distribution of the gift packages; (2) The separate gifts not exceeding $100 in fair retail value in the country of shipment ($200, in the case of articles sent from persons in the Virgin Islands, Guam, and American Samoa) included in the consolidated shipment are before shipment individually wrapped and addressed to the donee in the United States; (3) Each gift package is marked on the outside to indicate that it contains a gift not exceeding $100 in fair retail value in the country of shipment ($200, in the case of packages sent from persons in the Virgin Islands, Guam, and American Samoa); and (4) Each gift package is separately listed in the name of the addressee-donee on a packing list, manifest, bill of lading, or other shipping document. (e) No alcoholic beverage, cigars (including cheroots and cigarillos) and cigarettes containing tobacco, cigarette tubes, cigarette papers, smoking tobacco (including water pipe tobacco, pipe tobacco, and roll-your-own tobacco), snuff, or chewing tobacco, shall be exempted from the payment of duty and tax under § 10.151 or § 10.152. (f) The exemptions provided for in § 10.151 or § 10.152 are not to be allowed in respect of any shipment containing one or more gifts having an aggregate fair retail value in the country of shipment in excess of $100 ($200, in the case of articles sent from persons in the Virgin Islands, Guam, and American Samoa), except as indicated in paragraph (d) of this section. For example, an article ordinarily subject to an ad valorem rate of duty but sent as a gift, if the fair retail value exceeds the $100 (or $200) exemption, would be subject to a duty based upon its value under the provisions of section 402 or 402(a), Tariff Act of 1930, as amended (19 U.S.C. 1401a or 1402), even though the dutiable value is less than the $100 (or $200) exemption. (g) The exemption referred to in § 10.151 is not to be allowed in the case of any merchandise of a class or kind provided for in any absolute or tariff-rate quota, whether the quota is open or closed. In the case of merchandise of a class or kind provided for in a tariff-rate quota, the merchandise is subject to the rate of duty in effect on the date of entry. (h) The exemption provided for in § 10.151 is not to be allowed with respect to any tax imposed under the Internal Revenue Code collected by other agencies on imported goods.

19 C.F.R. § 10.58 Bolting cloths; marking.

(a) As a prerequisite to the free entry of bolting cloth for milling purposes under subheading 5911.20.20, Harmonized Tariff Schedule of the United States, the cloth shall be indelibly marked from selvage to selvage at intervals of not more then 10.16 centimeters with “bolting cloth expressly for milling purposes” in block letters 7.62 centimeters in height. Bolting cloths composed of silk imported expressly for milling purposes shall be considered only such cloths as are suitable for and are used in the act or process of grading, screening, bolting, separating, classifying, or sifting dry materials, or dry materials mixed with water, if the water is merely a carrying medium. (b) Bolting cloths not marked in the manner above indicated at the time of importation may be so marked by the importers in public stores under the supervision of customs officers.

19 C.F.R. § 10.180 Certification.

(a) The foreign official's meat-inspection certificate, or its electronic equivalent, required by U.S. Department of Agriculture regulations (9 CFR 327.4) shall be modified to include the certification below when fresh, chilled, or frozen beef is to be entered under the provisions of subheadings 0201.20.10, 0201.30.02, 0202.20.02, 0202.20.10, Harmonized Tariff Schedule of the United States (HTSUS). The certification shall be made, prior to exportation of the beef, by an official of the government of the exporting country and filed with Customs with the entry summary or with the entry when the entry summary is filed at the time of entry. The requirements of this section shall be in addition to those requirements contained in 9 CFR 327.4. Appropriate officials of the exporting country should consult with the U.S. Department of Agriculture as to the beef grades or standards within their country that satisfy the certification requirement. Exporters or importers of beef to be entered under the provisions of subheadings 0201.20.10, 0201.30.02, 0202.20.02, 0202.20.10, HTSUS, should consult with the U.S. Department of Agriculture prior to exportation in order to insure that the beef will satisfy the certification requirements. This certification is relevant only to U.S. Customs tariff classification and is not applicable to marketing of beef under U.S. Department of Agriculture grading standards, a matter within U.S. Department of Agriculture's jurisdiction. (b) Appropriate officials of the following countries have agreed with the U.S. Department of Agriculture as to the grades or standards for fresh, chilled, or frozen beef within their respective countries which will satisfy the certification requirements of paragraph (a) of this section: Canada. Certification I hereby certify to the best of my knowledge and belief that the herein described fresh, chilled, or frozen beef, meets the specifications prescribed in regulations issued by the U.S. Department of Agriculture (7 CFR 2853.106 (a) and (b)).

19 C.F.R. § 10.98 Copper-bearing fluxing material.

(a) For the purpose of this section, ores usable as a flux or sulphur reagent, mentioned in the provision for such ores in subheading 2603.00.00, Harmonized Tariff Schedule of the United States, shall include only ores which contain by weight not over 15 percent copper. (b) [Reserved] (c) There shall be filed in connection with the entry of such copper-bearing ores, either for consumption or warehouse, a declaration of the importer, or its electronic equivalent, that the material is to be used for fluxing purposes only. In the case of a consumption entry, the estimated tax shall be deposited at the time of entry. Liquidation of entries shall be suspended pending proof of use for fluxing purposes as hereinafter provided. (d) Samples of the material shall be taken in accordance with the commercial method in effect at the plant if to be used in a bonded smelting warehouse, or in accordance with §§ 151.52 through 151.55 of this chapter if entered for consumption, and the copper content thereof shall be determined by the Government chemist in accordance with the assay. (e) The management of the smelting or converting plant shall file with the appropriate Customs officer at the port or ports where the entries are to be liquidated, a statement based on its records of operation for each quarterly period showing for each furnace or converter the total quantity of material charged during each month or part thereof of each quarter, the total quantity of material used for fluxing purposes, and the quantity of imported ores used for fluxing purposes for which free entry was claimed under the above-mentioned provision, together with the copper content of such imported ores computed in accordance with the Government assay. If the quantity of ores used for fluxing purposes in any furnace or converter during any month or part thereof of any quarter is in excess of 25 percent of the charge of such furnace or converter, the quarterly statement shall be accompanied by an explanation of the necessity for using such quantity for fluxing purposes.

19 C.F.R. § 10.1 Domestic products; requirements on entry.

(a) Except as otherwise provided for in paragraph (g), (h), (i) or (j) of this section or elsewhere in this part or in § 145.35 of this chapter, the following documents must be filed in connection with the entry of articles in a shipment valued over $2,500 and claimed to be free of duty under subheading 9801.00.10 or 9802.00.20, Harmonized Tariff Schedule of the United States (HTSUS): (1) A declaration by the foreign shipper in substantially the following form: (2) A declaration by the owner, importer, consignee, or agent having knowledge of the facts regarding the claim for free entry. If the owner or ultimate consignee is a corporation, such declaration may be signed by the president, vice president, secretary, or treasurer of the corporation, or may be signed by any employee or agent of the corporation who holds a power of attorney executed under the conditions outlined in subpart C, part 141 of this chapter and a certification by the corporation that such employee or other agent has or will have knowledge of the pertinent facts. This declaration must be in substantially the following form: (b) In any case in which the value of the returned articles exceeds $2,500 and the articles are not clearly marked with the name and address of the U.S. manufacturer, the Center director may require, in addition to the declarations required in paragraph (a) of this section, such other documentation or evidence as may be necessary to substantiate the claim for duty-free treatment. Such other documentation or evidence may include a statement from the U.S. manufacturer verifying that the articles were made in the United States, or a U.S. export invoice, bill of lading or airway bill evidencing the U.S. origin of the articles and/or the reason for the exportation of the articles. (c) A certificate from the master of a vessel stating that products of the United States are returned without having been unladen from the exporting vessel may be accepted in lieu of the declaration of the foreign shipper required by paragraph (a)(1) of this section. (d) If the Center director is reasonably satisfied, because of the nature of the articles or production of other evidence, that the articles are imported in circumstances meeting the requirements of subheading 9801.00.10 or 9802.00.20, HTSUS, and related section and additional U.S. notes, he may waive the requirements for producing the documents specified in paragraph (a) of this section. (e) No evidence relative to the conditions of subheading 9801.00.10, HTSUS, will be required in the case of articles the product of the U.S. in use at the time of importation as the usual coverings or containers of merchandise not subject to an ad valorem rate of duty unless such articles would be dutiable if not products of the U.S. under General Rule of Interpretation 5, HTSUS. (f) In the case of photographic films and dry plates manufactured in the United States (except motion picture films to be used for commercial purposes) exposed abroad and entered under subheading 9802.00.20, HTSUS, the requirements of paragraphs (a) and (c) of this section are applicable except that the declaration by the foreign shipper provided for in paragraph (a)(1) to the effect that the articles “are returned without having been advanced in value or improved in condition by any process of manufacture or other means” must be crossed out, and the entrant must show on the declaration provided for in paragraph (a)(2) that the subject articles when exported were of U.S. manufacture and are returned after having been exposed, or exposed and developed, and, in the case of motion picture films, that they will not be used for commercial purposes. (g) Aircraft and aircraft parts and equipment. (1) In the case of aircraft and aircraft parts and equipment returned to the United States under subheading 9801.00.10, HTSUS, by or for the account of an aircraft owner or operator and intended for use in his own aircraft operations, within or outside the United States, the entry summary may be made on CBP Form 3311, or its electronic equivalent. The entry summary on CBP Form 3311, or its electronic equivalent, must be executed by the entrant and supported by the entry documentation required by § 142.3 of this chapter. If the CBP officer is satisfied that the articles are products of the United States, that they have not been improved in condition or advanced in value while abroad, and that no drawback has been or will be paid, the other documents described in this section will not be required, and no bond need be filed for their production. (2) The entrant must show on CBP Form 3311, or its electronic equivalent: (i) The name and address of the aircraft owner or operator by whom or for whose account the articles are returned to the United States, in the block headed “Articles Returned To (Name and Address)”, (ii) The name of the importing vessel or conveyance, (iii) The date of its arrival, (iv) A description of the articles, (v) The value of the articles, and (vi) That the articles are intended for use by the aircraft owner or operator in his own aircraft operations. (3) If CBP Form 3311, or its electronic equivalent, is filed at time of entry, it will serve as both the entry and the entry summary. (h) Nonconsumable vessel stores and equipment. (1) In the case of nonconsumable vessel stores and equipment returned to the United States under subheading 9801.00.10, HTSUS, the entry summary may be made on CBP Form 3311, or its electronic equivalent. The entry summary on CBP Form 3311, or its electronic equivalent, must be executed in duplicate by the entrant and supported by the entry documentation required by § 142.3 of this chapter. Before an entry summary on CBP Form 3311, or its electronic equivalent, may be accepted for nonconsumable vessel stores and equipment, the CBP officer must be satisfied that: (i) The articles are products of the United States. (ii) The articles have not been improved in condition or advanced in value while abroad. (iii) No drawback has been or will be paid, and (iv) No duty equal to an internal revenue tax is payable under subheading 9801.00.80, HTSUS. (2) The documentation described in paragraph (a) of this section will not be required in connection with an entry for nonconsumable vessel stores and equipment on CBP Form 3311, or its electronic equivalent. (3) To satisfy the CBP officer that no drawback has been or will be paid on the articles in connection with their removal from the United States, the master of the vessel or other person having knowledge of the facts must furnish a written declaration which may be made on the reverse side of CBP Form 3311, or its electronic equivalent, showing that the articles were: (i) Exported as stores or equipment on a United States vessel or a vessel operated by the United States Government, (ii) Not landed in a foreign country, except for any needed repairs, adjustments, or refilling and return to the vessel from which landed or, (iii) For transshipment as stores or equipment to another vessel. (4) The entrant also must show: (i) The name of the importing vessel, (ii) The date of its arrival, (iii) A description of the articles, and (iv) The value of the articles. (5) If CBP Form 3311, or its electronic equivalent, is filed at time of entry, it will serve as both the entry and the entry summary. (i) When the total value of articles of claimed American origin contained in any shipment does not exceed $250 and such articles are found to be unquestionably products of the United States and do not appear to have been advanced in value or improved in condition while abroad and no quota is involved, free entry thereof may be made under subheading 9801.00.10 on CBP Form 3311, or its electronic equivalent, executed by the owner, importer, consignee, or agent and filed in duplicate, without regard to the requirement of filing the documentation provided for in paragraph (a) of this section, unless the CBP officer has reason to believe that Customs drawback or exemption from internal revenue tax, or both, were probably allowed on exportation of the articles or that they are otherwise subject to duty. The entrant must show on Customs Form 3311, or its electronic equivalent, the name of the importing conveyance, the date of its arrival, the name of the country from which the articles were returned to the United States, and the value of the articles. The entrant must also produce evidence of his right to make entry (except as provided in § 141.11(b) of this chapter). If the Customs officer is not entirely certain that the articles to be entered under this paragraph by a nominal consignee are products of the United States, the actual owner or ultimate consignee thereof may be required to execute a Customs Form 3311, or its electronic equivalent. (j) In the case of products of the United States, when the aggregate value of the shipment does not exceed $10,000 and the products are imported— (1) For the purposes of repair or alteration, prior to reexportation, or (2) After having been either rejected or returned by the foreign purchaser to the United States for credit, free entry thereof may be made under subheading 9801.00.10, HTSUS, on CBP Form 3311, or its electronic equivalent, (a CBP Form 7501, or its electronic equivalent, must be submitted as well for such articles as provided in § 143.23(h) of this chapter), executed by the owner, importer, consignee, or agent and filed in duplicate, without regard to the requirement of filing the documentation provided for in paragraph (a) of this section, unless the CBP officer has reason to believe that CBP drawback or exemption from internal revenue tax, or both, were probably allowed on exportation of the articles or that they are otherwise subject to duty. The person making entry must show on CBP Form 3311, or its electronic equivalent, the name of the importing conveyance, the date of its arrival, the name of the country from which the articles were returned to the United States, and the value of the articles. The person making entry must also produce evidence of his right to make entry (except as provided in § 141.11(b) of this chapter). If the CBP officer is not entirely certain that the articles to be entered under this paragraph by a nominal consignee are products of the United States, the actual owner or ultimate consignee thereof may be required to execute a CBP Form 3311, or its electronic equivalent. I, ______________________, declare that to the best of my knowledge and belief the articles herein specified were exported from the United States, from the port of ________________ on or about ________________, 20____, and that they are returned without having been advanced in value or improved in condition by any process of manufacture or other means. Marks Number Quantity Description Value, in U.S. coin (Date) (Signature) (Address) (Capacity) I, ______________, declare that the (above) (attached) declaration by the foreign shipper is true and correct to the best of my knowledge and belief, that the articles were manufactured by ________________ (name of manufacturer) located in ________________ (city and state), that the articles were not manufactured or produced in the United States under subheading 9813.00.05, HTSUS, and that the articles were exported from the United States without benefit of drawback. (Date) (Address) (Signature) (Capacity)

19 C.F.R. § 10.3 Drawback; internal-revenue tax.

(a) Except as prescribed in § 10.1(f) or in paragraphs (c) and (f) of this section, no free entry shall be allowed under Chapter 98, Subchapter 1, Harmonized Tariff Schedule of the United States (HTSUS), in the final liquidation of an entry unless the Center director is satisfied by the certificate of exportation or other evidence or information that no drawback was allowed in connection with the exportation from the United States, and unless no internal-revenue tax is imposed on the importation of like articles not previously exported from the United States or, if such tax is being imposed at the time of entry for consumption or withdrawal from warehouse for consumption, the Center director is satisfied that an internal-revenue tax on production or importation was paid in respect of the imported article before it was exported from the United States and was not refunded. Except as provided for in § 10.1(f), when it is impracticable, because of the destruction of Customs records or other circumstances, to determine whether drawback was allowed, or the amount of drawback allowed, with respect to an article established to be a returned product of the United States which has not been advanced in value or improved in condition while abroad, there shall be assessed on the returned article an amount of duty determined as follows: (1) If there is any likelihood that drawback was allowable on the exportation of like articles at any time when the imported article may have been exported from the United States, the estimated amount of any drawback which would have been allowable if duty had been paid on any foreign merchandise likely to have been used in the manufacture of the returned article at the rate or rates applicable to such foreign merchandise on the date of importation of the returned article (see paragraph (b) of this section), and (2) If there is any likelihood that a refund or remission of tax was allowed on the exportation of the returned article, the amount of any internal-revenue tax which would be payable at the time of importation if the returned article were wholly of foreign origin, but in no such case shall there be assessed more than an amount equal to the duty and tax that would apply if the returned article were wholly of foreign origin and originally imported. (See § 10.7(a).) Except as provided for in § 10.1(f), if the imported article is of a kind which would be subject to an internal-revenue tax if of foreign origin and payment of an internal-revenue tax before exportation without refund thereof is not established, duty shall be assessed on the imported article in an amount equal to the internal-revenue tax imposed at the time of entry for consumption or withdrawal from warehouse for consumption on like articles of foreign origin, plus the amount of any drawback allowed on the exportation of the article from the United States; but if no drawback was allowed, the duty equal to internal-revenue tax shall be the total duty to be assessed. If an allowance of drawback on the exportation from the United States of the imported article is established, duty shall be assessed in an amount equal to such drawback, plus an amount equal to any internal-revenue tax which may be assessable in accordance with this paragraph; but in no case shall duty equal to drawback, or to drawback and internal-revenue tax, be assessed in an amount in excess of the ordinary Customs duty and internal-revenue tax applicable to like articles of foreign origin. In any case, where payment of internal-revenue tax before exportation without refund thereof is established, no duty equal to an internal-revenue tax currently in force shall be assessed. (b) In the absence of satisfactory evidence as to the nonallowance of drawback or the amount thereof allowed on the following articles of American manufacture or production, duty shall be assessed thereon in the amounts respectively indicated, the amount shown in each case being considered the fair average amount of drawback allowed on such articles: (c) The following articles shall be admitted free of duty, even though exported from the United States with benefit of drawback: (1) Any article of a kind which would be admitted free of duty otherwise than under Chapter 98, Subchapter 1, HTSUS, if of foreign origin; (2) Substantial containers or holders of domestic manufacture, including shooks and staves when returned as boxes or barrels, when in use at the time of importation as the usual containers of merchandise; (3) Any article provided for in subheadings 9801.00.70 or 9801.00.80, HTSUS, with respect to which the Center director has determined that the collection of duty under such subheadings 9801.00.70 or 9801.00.80, HTSUS, would involve an expense and inconvenience to the Government disproportionate to the probable amount of such duty; and (4) Other articles of domestic manufacture which are in use at the time of importation as the usual coverings or containers of merchandise not subject to an ad valorem rate of duty, and which have not been advanced in value or improved in condition while abroad by any process of manufacture or other means. (d) Articles manufactured or produced in the United States in a Customs bonded warehouse and exported shall be subject on reimportation to a duty equal to the total duty and internal-revenue tax, if any, imposed at the time of entry for consumption or withdrawal from warehouse for consumption with respect to the importation of like articles not previously exported from the United States. (e) Animals straying across the border or driven across the border for pasturage purposes or for feeding to improve them for the market and not returned within 8 months are excluded from free entry as domestic products returned. (f) Tobacco products and cigarette papers and tubes classifiable under subheading 9801.00.80, HTSUS, may be released from customs custody without the payment of that part of the duty attributable to the internal-revenue tax for return to internal-revenue bond as provided by section 5704(d) of the Internal Revenue Code of 1954.

19 C.F.R. § 10.4 Internal-revenue marks; erasure.

Internal-revenue brands or marks on casks or other containers previously exported from the United States must be erased at the importer's expense under Customs supervision before their delivery from Customs custody.

19 C.F.R. § 10.5 Shooks and staves; cloth boards; port director's account.

(a) Shooks and staves produced in the United States and returned in the form of complete boxes or barrels in use as the usual containers of merchandise are exempt from any duties imposed by the tariff laws upon similar containers made of foreign shooks or staves, provided their identity is established under the regulations in this part. (b) The term “shook” embraces only shooks which at the time of exportation from this country are ready to be assembled into boxes or barrels without further cutting to size; except that box shooks may be exported in double lengths and cut abroad. The number of boxes made from such shooks which may be imported into this country free of duty cannot exceed the number of complete sets of shooks exported. (c) [Reserved] (d) An exporter of shooks or staves in respect of which free entry is to be claimed when returned as boxes or barrels shall file in triplicate with the director of the port of exportation, at least 6 hours before the landing of the articles on the exporting vessel, a Certificate of Registration, Customs Form 4455, or its electronic equivalent. (e) The Certificate of Registration, CF 4455, or its electronic equivalent, shall be completed in triplicate by the port director after verification from the manifest of the exporting vessel and the return of the lading officer. The original shall be forwarded by the port director to the consignee. The duplicate copy shall be given to the exporter and the triplicate copy shall be retained. (f) Whenever boxes or barrels alleged to have been manufactured from American shooks or staves are shipped to the United States from a person abroad other than the one to whom they were exported from the United States, the importer shall be required to obtain from the foreign consignee to whom the shooks or staves were originally exported from this country the certificate or certificates, Customs Form 4455, or its electronic equivalent, covering the exportation of the shooks or staves from the United States, or an extract therefrom signed by such consignee, showing the number of shooks or staves covered by such certificate or certificates, together with the number of superficial feet of such shooks or staves. Such Form 4455, or its electronic equivalent, or extract therefrom, shall be filed by the importer in connection with the entry of the boxes or barrels. (g) Accounts shall be kept by the director of the port of exportation of the shooks and staves as to each exportation thereof and as to the returns thereof in boxes, barrels, etc. Notifications of such returns shall be given to the port of exportation by the director of the port of importation. When returns in the form of boxes, barrels, etc., entirely account for the shooks and staves exported as shown on the appropriate Customs Form 4455, or its electronic equivalent, the port director maintaining the account shall so inform the port director making inquiry about the merchandise being imported and alleged to contain shooks or staves covered by the particular exportation. (h) A record of cloth boards of domestic manufacture exported to be wrapped with foreign textiles shall be kept by the port director in a similar manner as for shooks and staves. Cloth boards of domestic manufacture are conditionally free of duty under Chapter 98, subchapter 1, Harmonized Tariff Schedule of the United States (HTSUS). If such boards are advanced in value or improved in condition while abroad, free entry shall be denied on importation.

19 C.F.R. § 10.6 Shooks and staves; claim for duty exemption.

An importer, seeking an exemption from duty on account of boxes or barrels made from American shooks or staves, must make such a claim on Customs Form 4455, or its electronic equivalent, at the time of filing the entry. Upon receipt, from the director of the port of exportation of the shooks and staves, of corroboration that the records of exportation do not conflict materially with such a claim, the exemption may be allowed. If the claim for an exemption is disallowed in full or in part, the importer may file a request within 15 days of the date of the port director's notice to him of any disallowance, for referral of the question to the Commissioner of Customs for review.

19 C.F.R. § 10.7 Substantial containers or holders.

(a) Substantial containers or holders, which are products of the United States, which are of the usual and ordinary types used in the shipment or transportation of goods, which are reusable for such purposes, and which are imported containing or holding merchandise, shall be entered under the general regulations governing the free entry of domestic products exported and returned. When such containers or holders are imported not containing or holding merchandise they may be admitted without entry if readily identifiable as products of the United States. (b) Substantial containers or holders, which are of foreign production and previously imported duty paid, which are of the usual or ordinary types used in the shipment or transportation of goods, which are reusable for such purpose, and which are imported containing or holding merchandise, shall be exempt from duty if (1) exported in accordance with the regulations contained in § 10.5 (d) and (e), and (2) there is filed in connection with the entry a certificate of the foreign shipper in the form prescribed by paragraph (c) of this section. (c) The certificate to be furnished by the foreign shipper for the use of the director of the port of entry shall be in the following form: (d) The port director, after verification of the foreign shipper's certificate with the records of the director of the port of exportation in this country, shall allow free entry to the extent the basis for such allowance is verified. The procedure in the last two sentences of § 10.6 shall be applicable. (e) If claim for exemption from duty for such containers or holders of foreign production previously imported duty paid is made at the time of entry, the certificate of the foreign shipper may be accepted if produced at any time prior to the liquidation of the entry. (f) When such containers or holders of foreign production previously imported duty paid are reimported empty, they may be admitted without entry if readily identifiable as having been previously imported duty paid. I, ________________, of ________________, do hereby certify that to the best of my knowledge and belief the substantial containers and holders mentioned in (the annexed invoice) (invoice No. ________ of ________, 19____) * are of the manufacture of ________________ and were exported from the United States at the port of ____________, per S.S. ________________ on __________, 19____, and that the same are being returned to the United States (empty) filled with ________) (holdings ______________).* * Cross out inapplicable words. Shipper

19 C.F.R. § 10.8 Articles exported for repairs or alterations.

(a) Except as otherwise provided for in this section and except in the case of goods covered by § 181.64 of this chapter, the following documents shall be filed in connection with the entry of articles which are returned after having been exported for repairs or alterations and which are claimed to be subject to duty only on the value of the repairs or alterations performed abroad under subheading 9802.00.40 or 9802.00.50, Harmonized Tariff Schedule of the United States (HTSUS): (1) A declaration from the person who performed such repairs or alterations, in substantially the following form: (2) A declaration by the owner, importer, consignee, or agent having knowledge of the pertinent facts in substantially the following form: (b) The Center director may require such additional documentation as is deemed necessary to prove actual exportation of the articles from the United States for repairs or alterations, such as a foreign customs entry, foreign customs invoice, foreign landing certificate, bill of lading, or an airway bill. (c) If the Center director concerned is satisfied, because of the nature of the articles or production of other evidence, that the articles are imported under circumstances meeting the requirements of subheading 9802.00.40 or 9802.00.50, HTSUS, and related section and additional U.S. notes, he may waive submission of the declarations provided for in paragraph (a) of this section. (d) The port director or Center director shall require at the time of entry a deposit of estimated duties based upon the full cost or value of the repairs or alterations. The cost or value of the repairs or alterations outside the United States, which is to be set forth in the invoice and entry papers as the basis for the assessment of duty under subheading 9802.00.40 or 9802.00.50, HTSUS, shall be limited to the cost or value of the repairs or alterations actually performed abroad, which will include all domestic and foreign articles furnished for the repairs or alterations but shall not include any of the expenses incurred in this country whether by way of engineering costs, preparation of plans or specifications, furnishing of tools or equipment for doing the repairs or alterations abroad, or otherwise. I,________________, declare that the articles herein specified are the articles which, in the condition in which they were exported from the United States, were received by me (us) on ________________, 19____, from________________ (name and address of owner or exporter in the United States); that they were received by me (us) for the sole purpose of being repaired or altered; that only the repairs or alterations described below were performed by me (us); that the full cost or (when no charge is made) value of such repairs or alterations are correctly stated below; and that no substitution whatever has been made to replace any of the articles originally received by me (us) from the owner or exporter thereof mentioned above. Marks and numbers Description of articles and of repairs or alterations Full cost or (when no charge is made) value of repairs or alterations (see subchapter II, chapter 98, HTSUS) Total value of articles after repairs or alterations (Date) (Address) (Signature) (Capacity) I, __________, declare that the (above) (attached) declaration by the person who performed the repairs or alterations abroad is true and correct to the best of my knowledge and belief; that the articles were not manufactured or produced in the United States under subheading 9813.00.05, HTSUS; that such articles were exported from the United States for repairs or alterations and without benefit of drawback (unless subject to USMCA drawback) from ________________ (port) on ________________, 19____; and that the articles entered in their repaired or altered condition are the same articles that were exported on the above date and that are identified in the (above) (attached) declaration. (Date) (Address) (Signature) (Capacity)

19 C.F.R. § 10.8a a Imported articles exported and reimported.

(a) In addition to regular entry procedures, supplementary documentation is required in connection with duty-free entries under subheading 9801.00.25, Harmonized Tariff Schedule of the United States (19 U.S.C. 1202), of articles which were originally entered duty paid, removed from Customs custody, and subsequently exported, if: (1) The articles were exported within 3 years after the date of the previous importation. (2) The articles were not advanced in value or improved in condition by any process of manufacture or other means while abroad. (3) The articles did not conform to sample or specifications abroad. (4) The articles are reimported by or for the account of the person who imported them into and exported them from the United States. (b) The following supplementary documents shall be filed in connection with the entry of articles claimed to be free of duty under subheading 9801.00.25, Harmonized Tariff Schedule of the United States: (1) A declaration by the person abroad who received and is returning the merchandise to the United States, in substantially the following form: (2) A declaration by the owner, importer, consignee, or agent, in substantially the following form: (c) If the Center director concerned is reasonably satisfied because of the nature of the articles or production of other evidence that the requirements of subheading 9801.00.25, Harmonized Tariff Schedule of the United States, and the related section and additional U.S. notes have been met, he may waive the production of the documents provided for in paragraph (b) of this section. I declare that the______________________ (Description of articles) were received by me from __________________________________ (Name and address of U.S. exporter), that they have not been advanced in value or improved in condition by any process of manufacture or other means and are being returned to ________________________________(Name and address of consignee in the United States) because they do not conform to sample or specifications for the following reasons: (Date) (Signature) (Address) (Title) I declare that the ______________________ (Description of articles) were previously imported into the United States at the Port of ________________ (Name of port), Entry No.______, on ______________ (Date of entry) by ______________________ (Name and address of importer) at which time duty was paid; that they were exported from the United States at the Port of ________________ (Name of port) on ____________________ (Date of exportation) by ______________________ (Name and address of exporter) without benefit of drawback; that the articles are being reimported by or for the account of ________________, and, that the attached declaration from ________________________________ (Name of foreign shipper) is correct in every respect. (Date) (Signature) (Address) (Title)

19 C.F.R. § 10.9 Articles exported for processing.

(a) Except as otherwise provided for in this section, the following documents shall be filed in connection with the entry of articles which are returned after having been exported for further processing and which are claimed to be subject to duty only on the value of the processing performed abroad under subheading 9802.00.60, Harmonized Tariff Schedule of the United States (HTSUS): (1) A declaration by the person who performed the processing abroad, in substantially the following form: (2) A declaration by the owner, importer, consignee, or agent having knowledge of the pertinent facts in substantially the following form: (b) The Center director may require such additional documentation as is deemed necessary to prove actual exportation of the articles from the United States for processing, such as a foreign customs entry, foreign customs invoice, foreign landing certificate, bill of lading, or an airway bill. (c) If the Center director concerned is satisfied, because of the nature of the articles or production of other evidence, that the articles are imported under circumstances meeting the requirements of subheading 9802.00.60, HTSUS, and related section and additional U.S. notes, he may waive submission of the declarations provided for in paragraph (a) of this section. (d) The port director or Center director shall require at the time of entry a deposit of estimated duties based upon the full cost or value of the processing. The cost or value of the processing outside the United States, which is to be set forth in the invoice and entry papers as the basis for the assessment of duty under subheading 9802.00.60, HTSUS, shall be limited to the cost or value of the processing actually performed abroad, which will include all domestic and foreign articles used in the processing but shall not include the exported United States metal article or any of the expenses incurred in this country whether by way of engineering costs, preparation of plans or specifications, furnishing of tools or equipment for doing the processing abroad, or otherwise. I, __________, declare that the articles herein specified are the articles which, in the condition in which they were exported from the United States, were received by me (us) on ____________, 19 ______, from ________________ (name and address of owner or exporter in the United States); that they were received by me (us) for the sole purpose of being processed; that only the processing described below was effected by me (us); that the full cost or (when no charge is made) value of such processing and the value of the articles after processing are correctly stated below; and that no substitution whatever has been made to replace any of the articles originally received by me (us) from the owner or exporter thereof mentioned above. Marks and numbers Description of articles and of processing Full cost or (when no charge is made) value of processing (see subchapter II, chapter 98, HTSUS) Total value of articles after processing (Date) (Address) (Signature) (Capacity) I, __________, declare that the (above) (attached) declaration by the person who performed the processing abroad is true and correct to the best of my knowledge and belief; that the articles were manufactured in the United States by ________________ (name and address) or, if of foreign origin, were subjected to ________________ (show processes of manufacture, such as molding, casting, machining) in the United States by ________________ (name and address); that the articles were not manufactured or produced in the United States under subheading 9813.00.05, HTSUS; that the articles were exported for processing and without benefit of drawback from ________________ (port) on ____________, 19 ______; that the articles entered in their processed condition are otherwise the same articles that were exported on the above date and that are identified in the (above) (attached) declaration; and that the returned articles will be subjected to ________________ (describe processing to be performed in the United States) by ________________ (name and address of U.S. processor). (Date) (Address) (Signature) (Capacity)

19 C.F.R. § 10.80 Remission of duty; withdrawal; bond.

Imported salt in bond may be used in curing fish taken by vessels licensed to engage in the fisheries, and in curing fish in the shores of the navigable waters of the U.S., whether such fish are taken by licensed or unlicensed vessels, and upon proof that the sale has been used for either of such purposes, the duties on the same shall be remitted. (Section 313(e), Tariff Act of 1930, 19 U.S.C. 1313(e)). Imported salt entered for warehouse may be withdrawn under bond for use in curing fish. Upon proof that the salt has been so used, the duties thereon shall be remitted. In no case shall the quantity of salt withdrawn exceed the reasonable requirements of the case. Withdrawal shall be made on Customs Form 7501, or its electronic equivalent. Each withdrawal shall contain the statement prescribed for withdrawals in § 144.32 of this chapter. When the withdrawal is made by a person other than the importer of record, a bond on Customs Form 301, containing the bond conditions set forth in § 113.62 of this chapter for the production of proof of proper use shall be filed. Upon acceptance of the bond, a withdrawal permit shall be issued on Customs Form 7501, or its electronic equivalent.

19 C.F.R. § 10.81 Use in any port.

(a) Salt withdrawn under bond for use in curing fish on the shores of navigable waters may be used for such purpose at any port, but the evidence of use in such cases shall be submitted through the director of the port where the salt was used. (b) If desired, salt to be used in curing fish on shore at another port than that in which it is warehoused in bond may be withdrawn under a transportation entry and shipped in bond to the other port at which it is to be used, where it may be entered on Customs Form 7501, or its electronic equivalent, which shall show withdrawal of the salt for use in curing fish. Thereupon, and upon the filing of a bond on Customs Form 301, containing the bond conditions set forth in § 113.62 of this chapter, such salt may be used without being sent to a bonded warehouse or public store. In such a case the proof of use shall be filed at the latter port.

19 C.F.R. § 10.83 Bond; cancellation; extension.

(a) If it shall appear to the satisfaction of the Center director holding the bond referred to in § 10.80, that the entire quantity of salt covered by the bond has been duly accounted for, either by having been used in curing fish or by the payment of duty, the Center director may cancel the charges against the bond. The Center director may require additional evidence in corroboration of the proof of use produced. (b) On application of the person making the withdrawal, the period of the bond may be extended 1 year so as to allow the salt to be used during the time of extension in curing fish with the same privileges as if used during the original period.

19 C.F.R. § 10.57 Certified seed potatoes, and seed corn or maize.

Claim for classification as seed potatoes under subheading 0701.10.00, as seed corn (maize) under subheading 1005.10., HTSUS, shall be made at the time of entry. Such classification shall be allowed only if the articles are white or Irish potatoes, or maize or corn, imported in containers and if, at the time of importation, there is firmly affixed to each container an official tag supplied by the government of the country in which the contents were grown, or an agency of such government. The tag shall bear a certificate to the effect that the specified contents of the container were grown, and have been approved, especially for use as seed. The tag shall also bear a number or other symbol identifying the potatoes or corn in the container with an inspection record of the foreign government or its agency on the basis of which the certificate was issued.

19 C.F.R. § 10.59 Exemption from customs duties and internal-revenue tax.

(a) A vessel shall not be considered to be actually engaged in the foreign trade, or in trade between the Atlantic and Pacific ports of the United States, or between the United States and its possessions, or between Hawaii and any other part of the United States or between Alaska and any other part of the United States, as the case may be, for the purpose of withdrawing supplies free of duty and internal-revenue tax pursuant to section 309(a), Tariff Act of 1930, as amended, unless it is— (1) Operating on a regular schedule in a class of trade which entitles it to the privilege; (2) Actually transporting passengers or merchandise to or from a foreign port, a port on the opposite coast of the United States, or between a port in a possession of the United States and a port in the United States or in another of its possessions, or between Hawaii and any other part of the United States or between Alaska and any other part of the United States; (3) Departing in ballast (without cargo or passengers) from one port for another, domestic or foreign, for the purpose of lading passengers or cargo at the port of destination for carriage in a class of trade specified in section 309(a), Tariff Act of 1930, as amended, for which class of trade the vessel is suitable and substantially ready for service with necessary fittings, outfit, and equipment already installed on its departure in ballast, and from which it is not diverted prior to carriage of passengers or cargo in such trade. A written declaration of the owner or agent of the vessel may be required in connection with the withdrawal, certifying to the vessel's suitableness and substantial readiness with necessary fittings, outfit, and equipment already installed on its departure in ballast for service in a class of trade specified in section 309 and agreeing to notify the port director if it is laid up or diverted from such class of trade prior to the carriage of cargo or passengers in such trade. (b) A withdrawal of articles may not be made under section 309, Tariff Act of 1930, as amended, for use on a trial or test trip of a vessel preparatory to its actually engaging in trades. (c) The classes of articles which may be withdrawn as provided for by section 309, Tariff Act of 1930, as amended, include the containers in which the articles are withdrawn and laden even though for tariff purposes the containers are classifiable separately from their contents, except unusual containers within the purview of General Rule of Interpretation 5, Harmonized Tariff Schedule of the United States (HTSUS). (d) For the purpose of allowing the privileges of section 309, Tariff Act of 1930, as amended, to aircraft as provided for therein, an aircraft shall be deemed to be a vessel within the meaning of each provision of this section and of §§ 10.60 through 10.64 which may be applied to aircraft. (e) A documented vessel with a fisheries license endorsement and foreign fishing vessels of 5 net tons or over may be allowed to withdraw distilled spirits (including alcohol), wines, and beer conditionally free under section 309, Tariff Act of 1930, as amended (19 U.S.C. 1309), if the port director is satisfied from the quantity requested, in the light of (1) whether the vessel is employed in substantially continuous fishing activities, and (2) the vessel's complement, that none of the withdrawn articles is intended to be removed from the vessel in, or otherwise returned to, the United States without the payment of duty or tax. Such withdrawal shall be permitted only after the approval by the port director of a special written application, in triplicate, on Customs Form 5125, of the withdrawer, supported by a bond on Customs Form 301, containing the bond conditions set forth in § 113.62 of this chapter executed by the withdrawer. Such application shall be filed with Customs Form 7501, or its electronic equivalent, or 7512, as the case may be. The original and the triplicate copy of the application, after approval, shall be stamped with the withdrawal number and date thereof and shall be returned to the withdrawer for use as prescribed below. Approval of each such application shall be subject to the condition that the original and the triplicate copy shall be presented thereafter by the withdrawer or the vessel's master to the port director within 24 hours (excluding Saturday, Sunday, and holidays) after each subsequent arrival of the vessel at a Customs port or station and that an accounting shall be made at the time of such presentation of the disposition of the articles until the port director is satisfied that all of them have been consumed on board, or landed under Custom's supervision, and takes up the original application. (The withdrawer shall retain the triplicate copy as evidence of consumption on board or landing under Customs supervision.) The approval shall be subject to the further conditions that any such withdrawn article remaining on board while the vessel is in port shall be safeguarded in the manner and to such extent as the district director for the port or place of arrival shall deem necessary and that failure to comply with the conditions upon which a conditionally free withdrawal is approved shall subject the total quantity of withdrawn articles to the assessment and collection of an amount equal to the duties and taxes that would have been assessed on the entire quantity of supplies withdrawn had such supplies been regularly entered, or withdrawn, for consumption. Exemption from internal-revenue tax on distilled spirits, alcohol, wines, and beer removed from any internal-revenue bonded warehouse, industrial alcohol premises, bonded wine cellar, or brewery; and drawback on taxpaid distilled spirits or wines removed from an export storage room, or on taxpaid beer removed from a brewery (or place of storage elsewhere), for use as supplies on vessels under section 309, Tariff Act of 1930, as amended, are governed by regulations of the Internal Revenue Service. (f) Pursuant to section 309(d) of the Tariff Act of 1930, as amended, the Department of Commerce has found and advised the Secretary of the Treasury of the foreign countries which allow privileges to aircraft registered in the United States substantially reciprocal to those described in sections 309 and 317 of the Tariff Act of 1930, as amended. Advices also have been received of changes and limitations of privileges allowed. In accordance with these advices, Treasury decisions are issued extending to the aircraft of foreign countries free withdrawal privileges reciprocal to those found by the Secretary of Commerce to be extended by those countries to aircraft registered in the United States or making changes in such privileges on the basis of new findings. Listed below by countries are the Treasury decisions issued pursuant to such findings which are currently in effect:

19 C.F.R. § 10.60 Forms of withdrawals; bond.

(a) Withdrawals from warehouse shall be made on CBP Form 7501. Each withdrawal must contain the statement prescribed for withdrawals in § 144.32 of this chapter and all of the statistical information as provided in § 141.61(e) of this chapter. Withdrawals from continuous CBP custody elsewhere than in a bonded warehouse must be made by filing an in-bond application pursuant to part 18 of this chapter, except as provided for by paragraph (h) of this section. When a withdrawal of supplies or other articles is made which may be used on a vessel while it is proceeding in ballast to another port as provided for by § 10.59(a)(3), a notation of this fact shall be made on the withdrawal and the name of the other port given if known. (b) If the withdrawal is made by other than the principal on the warehouse or rewarehouse entry, as the case may be, the assent of such principal shall be endorsed on the withdrawal, unless the principal has otherwise authorized such withdrawal in writing. (c) A bond on Customs Form 301, containing the bond conditions set forth in § 113.62 of this chapter shall be taken when the withdrawal from warehouse is made by a person other than the principal on the warehouse or rewarehouse entry, as provided for in paragraph (b) of this section. (d) Except as otherwise provided in § 10.62b, relating to withdrawals from warehouse of aircraft turbine fuel to be used within 30 days of such withdrawal as supplies on aircraft under section 309, Tariff Act of 1930, as amended, when the supplies are to be laden at a port other than the port of withdrawal from warehouse, they shall be withdrawn for transportation in bond to the port of lading by filing an in-bond application pursuant to part 18 of this chapter. The procedure shall be the same as that prescribed in 144.37 of this chapter. (e) No bond shall be required in the case of war vessels. (f) Unless transfer is permitted under the provisions of paragraph (h) of this section, when articles are withdrawn from continuous Customs custody elsewhere than in a bonded warehouse for lading at the port of withdrawal, the procedure provided for in § 18.25 of this chapter shall be followed. Unless transfer is permitted under the provisions of paragraph (h) of this section, when articles are withdrawn from continuous Customs custody elsewhere than in a bonded warehouse for lading at another port, the procedure set forth in § 18.26 of this chapter shall be followed. There shall be such examination of the articles as may be necessary to satisfy the port director that they are subject to the privileges of section 309, Tariff Act of 1930, as amended, and that the value and quantity declared for them are correct. (g) A withdrawal under § 10.59(e) shall be supported by a bond on Customs Form 301, containing the bond conditions set forth in § 113.62 of this chapter. (h) If a request is made for permission to transfer supplies or stores from one vessel to another which would be entitled to withdraw them free of duty and tax under section 309 or 317, Tariff Act of 1930, as amended, the port director in his discretion may permit the articles to be so transferred under Customs supervision under a permit on Customs Form 3171 in lieu of a formal withdrawal under the pertinent statute. In such a case, the pertinent statute shall be indicated by an endorsement made on the permit by the port director.

19 C.F.R. § 10.61 Withdrawal permit.

Upon the filing of the withdrawal and the execution of the bond, when required, the port director shall issue a permit on CBP Form 7501 or in-bond application.

19 C.F.R. § 10.62 Bunker fuel oil.

(a) Withdrawal under section 309, Tariff Act of 1930, as amended (19 U.S.C. 1309). Except as otherwise provided in § 10.62b, relating to withdrawals from warehouse of aircraft turbine fuel to be used within 30 days of such withdrawal as supplies on aircraft under section 309, Tariff Act of 1930, as amended (19 U.S.C. 1309), when all the bunker fuel oil in a Customs bonded tank is intended only for lading duty free as supplies on vessels under section 309 at the port where the tank is located, delivery of the oil, by Customs bonded carrier, cartman, or lighterman (including bonded pipelines), under withdrawals on Customs Form 7501, or its electronic equivalent, either single or blanket, may be made without the presence of a Customs officer. When a blanket withdrawal is filed and a partial release takes place, the partial release procedure set forth in § 19.6(d) of this chapter shall be followed for each partial release. However, each abstract copy of Customs Form 7501, or its electronic equivalent, shall include the following additional information: (1) Type of oil withdrawn. (2) Number or other identification of sales order therefor. (3) Name of bonded carrier, date it received oil. (4) Receipt signed by master or other person in charge of delivering conveyance identified by number, or name, and if Customs bonded lighterman or cartman, by the carrier's license number. (5) Name and location of vessel obtaining oil. (6) Quantity and identification of each type of oil received with date, and signature and title of receiving officer. If all the oil is laden on the receiving vessel at the port of withdrawal via pipeline from the bonded storage tank, paragraphs (a) (3) and (4) of this section shall be deemed to be inapplicable. (b) If a blanket free withdrawal of bunker fuel oil is filed, to comply with Bureau of the Census requirements the withdrawal on Customs Form 7501, or its electronic equivalent, shall be endorsed “Estimated Withdrawals” and limited to the aggregate quantity and value of fuel oil which it is estimated will be physically removed from Customs bond during the calendar month in which the withdrawal is filed for lading on vessels entitled to duty-free vessel supplies under section 309 of the Tariff Act of 1930, as amended. (c)(1) As an incident of the delivery of fuel oils classifiable at different rates of duty to a vessel or vessels under section 309 of the tariff act, the port director may, when necessary to enable a supplier to meet fuel specifications, permit the blending of the oils in the delivering conveyance or in other suitable facilities after withdrawal from the bonded tanks, upon the condition that, to the extent of the amount of oil withdrawn classifiable at the higher rate, duty at the higher rate will be paid on any portion of the blended fuel oil not delivered within a reasonable time to a qualified vessel. The withdrawer shall be required to file a withdrawal for consumption for the excess quantity withdrawn. For example, if the quantity withdrawn consists of 1,500 barrels of bunker C fuel oil classifiable at the rate of one-eighth cent per gallon and 500 barrels of diesel oil classifiable at the rate of one-fourth cent per gallon but only 1,400 barrels of the blended oil are actually laden as fuel supplies on qualified vessels, withdrawals for consumption are required for 500 barrels of diesel oil at the higher rate and for 100 barrels of bunker C fuel oil at the lower rate. (2) Delivering transferer receipt. The receipt of the delivering carrier on a copy of Customs Form 7501, or its electronic equivalent, for fuel oil which has been blended under paragraph (c)(1) of this section with components classifiable at different rates of duty shall show, for each warehouse entry number and withdrawal number involved, the types and quantity of oil received. (d) Fuel oil withdrawn as vessel supplies at one port may be laden at another port on a vessel or vessels entitled to the free withdrawal privileges of section 309 of the tariff act, under procedures prescribed in this section, provided the movement to the receiving vessel or vessels is under the bond of a qualified carrier as described in § 18.1(a) of this chapter. In such cases, the provisions of § 10.60(d) of this chapter shall be deemed inapplicable. (e) If a vessel not entitled to duty-free withdrawal of supplies from Customs bonded warehouses under section 309 of the Tariff Act of 1930, as amended, should be supplied with fuel oil from a Customs bonded tank described in paragraph (a) of this section because of an emergency, a duty paid withdrawal therefor shall be filed on the first day that the customhouse is open for the general transaction of business after the day on which the oil is laden on the using vessel. If there should be willful or repeated instances of late filing of a duty-paid withdrawal in such cases, the port director shall require a duty-paid withdrawal to be filed prior to the removal of fuel oil from the bonded tank. (f) When the procedures prescribed in this section are followed, representatives of the port director will from time to time verify various withdrawals against all pertinent records, including financial records, of the withdrawers, deliverers, and receivers of the oil. The withdrawer shall maintain all pertinent records relating to the withdrawal, delivery, or receipt of the fuel oil for 5 years from the date of liquidation of the related fuel oil entry.

19 C.F.R. § 10.62a a Blanket withdrawals for certain merchandise.

(a) Generally. Under this section, a blanket withdrawal on Customs Form 7501, or its electronic equivalent, may be filed for all or part of any merchandise withdrawn from warehouse except fuel oil covered under § 10.62, for use on qualified vessels. Such a withdrawal shall be made only for lading on board vessels at the port where the warehouse is located. The procedure for the blanket withdrawal and partial releases after the initial release are the same as those provided in § 19.6(d) of this chapter, except as noted in paragraph (b). (b) Partial release. A partial release on Customs Form 7501, or its electronic equivalent, in duplicate, or in triplicate if an extra copy is required by the port director, shall be presented to the warehouse proprietor and placed in the proprietor's permit file folder under the partial release procedure set forth in § 19.6(d) of this chapter, as merchandise is needed for delivery to a using vessel. The original of the partial release document shall accompany the merchandise for delivery to the Customs officer who will supervise lading, or if a Customs officer does not physically supervise lading, to the master of the vessel. The original shall be returned to the proprietor for record purposes after the Customs officer or master of the vessel, as appropriate, has certified lading of the goods described in the document.

19 C.F.R. § 10.62b b Aircraft turbine fuel.

(a) General. Unless otherwise provided, aircraft turbine fuel withdrawn from a Customs bonded warehouse for use under section 309, Tariff Act of 1930, as amended (19 U.S.C. 1309), may be commingled with domestic or other aircraft turbine fuel after such withdrawal only if such commingling is approved by the appropriate Customs official for the port where the commingling occurs. The appropriate Customs official may approve such commingling if the fueling system in which the commingling will occur contains adequate physical safeguards to prevent the possible unauthorized entry into the Customs territory of the bonded fuel. Such commingled fuel must be accounted for in the same 24-hour period in which it was commingled and must be— (1) Exported within that 24-hour period; (2) Used under section 309 within that 24-hour period; or (3) Entered or withdrawn for consumption, with duty deposited, as required under the applicable regulations (see part 144 of this chapter). (b) Duty-free withdrawal from warehouse of aircraft turbine fuel under section 557(a), Tariff Act of 1930, as amended (19 U.S.C. 1557(a)). Turbine fuel intended for use as supplies on aircraft under section 309, Tariff Act of 1930, as amended, and withdrawn from a Customs bonded warehouse shall be entitled to the privileges provided for in section 309 if an amount equal to or exceeding the quantity of such fuel is established, as provided for in paragraph (c) of this section, to have been used on aircraft qualifying for the privileges provided for in section 309 within 30 days after the withdrawal of the fuel from the Customs bonded warehouse. Withdrawal of aircraft turbine fuel under this paragraph shall be in accordance with the procedures in §§ 10.59 through 10.64, unless otherwise provided in this section. Withdrawals under this paragraph shall be annotated with the term “Withdrawal under 19 CFR 10.62b(b)”. (c) Establishment of use of fuel by qualifying aircraft. (1) The person withdrawing aircraft turbine fuel under paragraph (b) of this section must establish that an aircraft qualifying for the privileges provided for in section 309, Tariff Act of 1930, as amended, used fuel in an amount equal to or exceeding the quantity of the fuel withdrawn that is not entered and upon which duties are not paid by submitting to Customs, at the port where the bonded warehouse entry was filed, within the time provided in paragraph (d) of this section, either— (i) Records prepared in the normal course of business effecting the transfer to identified (e.g., by aircraft company name, flight number, flight origin and destination, and date of flight) aircraft of fuel in an amount equal to or exceeding the quantity of the fuel withdrawn which is not entered and on which duties are not paid and objective evidence that the aircraft to which the fuel was transferred were actually used in trade qualifying for the privileges provided in section 309, Tariff Act of 1930, as amended; or (ii) A certification (documentary or electronic) that: (A) All of the fuel withdrawn was intended for use on aircraft entitled to the privileges provided for in section 309; (B) Within 30 days of the date of withdrawal from warehouse, an amount of fuel equal to or exceeding the quantity of the fuel withdrawn which is not entered and on which duties are not paid was transferred as supplies to aircraft entitled to the privileges provided for in section 309; (C) All of the aircraft into which fuel is loaded hereunder were used in a trade provided for in section 309; and (D) The person making the certification possesses evidence (documentary or electronic) available for Customs inspection at a named place which supports each of the above statements. (2) Upon request by Customs, the person who submits the certification provided for in paragraph (c)(1) of this section shall promptly provide the evidence required to support the claim for treatment under this section (including the records described in § 10.62b(c)(1)(i)) and §§ 10.62 and 19.6(d) and each of the statements in the certification. (d) Time for establishment of use of fuel by qualifying aircraft. The person withdrawing aircraft turbine fuel under paragraph (b) of this section shall submit the records or certification provided for in paragraph (c) of this section by the 40th day after the date of withdrawal of the fuel unless the fuel was withdrawn under a blanket withdrawal under paragraph (g) of this section. If the fuel was withdrawn under a blanket withdrawal, the person withdrawing aircraft turbine fuel under this section shall submit the records or certification provided for in paragraph (c) of this section by the 40th day after all of the fuel covered by the blanket permit to withdraw has been withdrawn. (e) Treatment of turbine fuel withdrawn but not used on qualifying aircraft within 30 days. If turbine fuel is withdrawn from a Customs bonded warehouse under paragraph (b) of this section but fuel in an amount less than the quantity withdrawn is established to have been used within 30 days of the date of withdrawal from warehouse on aircraft qualifying for the privileges provided for in section 309, Tariff Act of 1930, as amended, a withdrawal for consumption shall be filed and duties shall be deposited for the excess of fuel so withdrawn over that used on aircraft so qualifying. Such withdrawal shall be filed and such duties shall be deposited by the 40th day after the date of withdrawal of the fuel in accordance with the procedures in § 144.38 of this chapter. Interest shall be payable and deposited with such duties, calculated from the date of withdrawal at the rate of interest established under 26 U.S.C. 6621. (f) Liquidated damages. Failure to account for turbine fuel withdrawn under paragraphs (b) through (h) of this section shall result in liquidated damages against the person withdrawing the turbine fuel, as provided for under § 113.62 of this chapter. Such failure to account for turbine fuel includes: (1) The failure to timely file the withdrawal for consumption and payment of duty, with interest, on the quantity of fuel so withdrawn in excess of the quantity of fuel established to have been used on qualifying aircraft within 30 days of withdrawal, as provided for in paragraph (e) of this section; (2) The failure to timely file the evidence or certification establishing such use of the fuel which is not entered and on which duties are not paid, as provided for in paragraph (c) of this section; or (3) The failure to promptly provide the evidence required to support the claim for treatment under paragraph (b) of this section, upon request by Customs, as provided for in paragraph (c)(2) of this section. (g) Blanket withdrawals. Blanket withdrawals, as provided for in §§ 10.62 and 19.6(d), may be used for withdrawals from warehouse under section 557(a), Tariff Act of 1930, as amended, and paragraphs (b) through (h) of this section, under the procedures provided in §§ 10.62 and 19.6(d) except that— (1) Application by the withdrawer for a blanket permit to withdraw shall be on the warehouse entry, or on the warehouse entry/entry summary when used as an entry, annotated with the words “Some or all of the merchandise will be withdrawn under blanket permit per §§ 10.62, 10.62b, and 19.6(d).”; (2) Turbine fuel withdrawn under a blanket permit as authorized in this paragraph may be delivered at a port other than the port of withdrawal; (3) Customs acceptance of a properly completed application for a blanket permit to withdraw, on the warehouse entry or warehouse entry/entry summary, will constitute approval of the blanket permit to withdraw; (4) A copy of the approved blanket permit to withdraw will be delivered to the warehouse proprietor, whereupon fuel may be withdrawn under the terms of the blanket permit; (5) The withdrawal document to be placed in the proprietor's permit file folder (see § 19.6(d)(2)) will be a commercially acceptable document of receipt (such as a “withdrawal ticket”) issued by the warehouse proprietor, identified with a unique alpha-numeric code and containing the following information: (i) Identity of withdrawer; (ii) Identity of warehouse and tank from which fuel is withdrawn; (iii) Date of withdrawal; (iv) Type of merchandise withdrawn; and (v) Quantity of merchandise withdrawn. (6) The date of withdrawal, for purposes of calculating the 30-day period in which fuel must be used on qualifying aircraft under this section, shall be the date on which physical removal of the fuel from the warehouse commences; (7) The blanket permit summary prepared by the proprietor as provided for in § 19.6(d)(4) shall be prepared when all of the fuel covered by the blanket permit has been withdrawn and shall account for all merchandise withdrawn under the blanket permit, as required by § 19.6(d)(4), by stating, in summary form, the unique alpha-numeric codes and information required in paragraph (g)(5) of this section, as well as the identity of the warehouse entry to which the withdrawal is attributed; (8) The certification on the blanket permit summary (see § 19.6(d)(4)) shall be that the merchandise listed thereunder was withdrawn in compliance with §§ 10.62, 10.62b, and 19.6(d); and (9) The person withdrawing aircraft turbine fuel under these blanket procedures shall submit the records or certification provided for in § 10.62b(c) by the 40th day after all of the fuel covered by the blanket permit has been withdrawn (see § 10.62b(d)). At the discretion of the port director for the port where blanket withdrawal was approved, submission of the records and evidence required to establish use of the fuel on qualifying aircraft may be required to be submitted electronically, in a format compatible with Customs electronic record-keeping systems. (h) Recordkeeping. The person withdrawing aircraft turbine fuel from warehouse under this section is subject to the recordkeeping requirements in 19 U.S.C. 1508 and 1509, as provided for in part 162 of this chapter.

19 C.F.R. § 10.63 Landing of supplies and stores from receiving vessel in the United States.

Supplies or stores laden on a vessel duty and tax free under section 309, Tariff Act of 1930, as amended, may be landed under Customs supervision under proper permit, the same as if they had been laden in a foreign country. See § 4.39 of this chapter. Except when transfer to another vessel entitled to the free withdrawal privilege is permitted under the original withdrawal under section 309, Tariff Act of 1930, as amended, the landed articles shall be treated as an importation from a foreign country.

19 C.F.R. § 10.64 Crediting or cancellation of bonds.

(a) Except as stated below, a bond on Customs Form 301, containing the bond conditions set forth in § 113.62 of this chapter may be credited or canceled in respect of such articles upon the vessel's departure from the port of lading in a class of trade or business entitling the articles to exemption from duty and tax under the statute. The withdrawer shall cause the merchandise to be delivered to the lading vessel, and shall provide such evidence of lading as required by the port director within 30 days after lading, except as provided in this section. If the vessel is not operated by the United States and proceeds in ballast from the port where the articles are laden to another port to lade passengers or cargo for carriage in a class of trade specified in section 309, Tariff Act of 1930, as amended, the bond may be credited or canceled upon the filing with the director of the port of withdrawal within 3 months after the date of withdrawal of a proper declaration as prescribed below. The declaration shall be executed by one of the following who has knowledge of the facts: (1) The operations manager or port captain for the vessel on which the articles are laden but not a representative of the supplier. (2) The master or other officer of the vessel on which the articles are laden. The declaration shall be in substantially the following form: (b) A declaration as to the intended business or trade of a vessel may, in the discretion of the port director, be accepted in lieu of a declaration prescribed in paragraph (a) of this section when the amount of duty or tax, or both, involved in a single lading is less than $100. I, (Operations manager, port captain, master, or other officer) of the vessel ____________ declare that I have knowledge of the facts set forth herein, and that upon the lading of the articles described below covered by withdrawal No. ________, filed at ________________(Name of port), the vessel then proceeded in ballast to ________________(Name of port) to lade cargo or passengers; that the vessel was suitable for service in the class of trade checked below with fittings, outfit, and equipment for such trade already installed when it so departed in ballast; and that upon arrival it proceeded to engage in the carriage of cargo or passengers in such trade, except as stated below: (If no exception, note “None”) 1. Foreign Trade. 2. Trade between Atlantic and Pacific ports of the United States, when such trade is not prohibited by coastwise laws. 3. Trade between the United States and any of its possessions, when such trade is not prohibited by coastwise laws. 4. Trade between Alaska or Hawaii and any other part of the United States, when such trade is not prohibited by coastwise laws. Description of articles: (Name and title)

19 C.F.R. § 10.65 Cigars and cigarettes.

(a) Imported cigars and cigarettes in bonded warehouse or otherwise in Customs custody, and such articles manufactured with the use of imported materials in a bonded manufacturing warehouse of class 6, may be withdrawn under section 317, Tariff Act of 1930, as amended, for consumption beginning beyond the 3-mile limit or international boundary, as the case may be, (1) on vessels actually engaged in the foreign, intercoastal, or noncontiguous territory trade within the purview of § 10.59(a); (2) on vessels departing from the port where the withdrawal is made directly for a foreign port, a port on the opposite coast, or a port in one of the possessions of the United States; or (3) on vessels of war or other governmental activity. (b) The privilege shall not be granted to vessels stationed in American waters for an indefinite period without sailing schedules, nor shall it be granted to aircraft of foreign registry of a country for which there is not in effect a finding and advice by the Department of Commerce under section 309(d), Tariff Act of 1930, as amended, that such country allows privileges to aircraft registered in the United States substantially reciprocal to those described in section 317, Tariff Act of 1930, as amended. See section 10.59(f). (c) With the following additions and exceptions, the same procedure shall be followed as in the case of withdrawals under section 309(a), Tariff Act of 1930, as amended. (1) No bond shall be required in the case of vessels operated by the United States Government. (2) When a shipping case containing cigars and cigarettes is made up of a number of units, each in a separate package, such units may be withdrawn separately, provided each unit is marked and numbered for identification and contains not less than 250 cigars or 1,000 cigarettes. In the case of imported cigars and cigarettes so packed, only one unit from each shipping case shall be opened for examination, unless the port director shall deem it necessary for the protection of the revenue to examine a greater quantity. Imported tobacco products on which the duty or internal-revenue tax has been paid may not be withdrawn under section 317, Tariff Act of 1930, as amended, with a drawback of such duty or internal-revenue tax. (3) When all the units in such shipping case are not to be withdrawn at the same time or for use on the same vessel, a blanket withdrawal may be filed for the entire case in lieu of a separate withdrawal for each unit. In such event, the withdrawal shall be retained by the warehouse proprietor until delivery receipts are obtained for the entire quantity covered by the withdrawal, provided the total period of time prior to delivery to the using vessel or aircraft does not exceed 5 years. A bond on Customs Form 301, containing the bond conditions set forth in § 113.62 of this chapter, when required, shall be filed at the time of or prior to the removal of any of the merchandise from the warehouse for delivery to the vessel on which it is to be used. (4) Merchandise for which blanket withdrawals are filed shall be stored in a separate room or enclosure in a bonded warehouse under separate locks, and the merchandise clearly marked to show that it has been withdrawn. If, at the time of any such inventory, any merchandise is missing and not properly accounted for, duties shall be paid thereon before any further withdrawals are permitted. (5) The declaration of use, when required, shall include a statement that consumption of the articles covered by the withdrawal did not begin until the withdrawing vessel or aircraft had proceeded beyond the 3 mile limit or the international boundary.

19 C.F.R. § 10.171 General.

(a) Statutory authority. Title V of the Trade Act of 1974 as amended (19 U.S.C. 2461-2467) authorizes the President to establish a Generalized System of Preferences (GSP) to provide duty-free treatment for eligible articles imported directly from designated beneficiary developing countries. Beneficiary developing countries and articles eligible for duty-free treatment are designated by the President by Executive order in accordance with sections 502(a)(1) and 503(a) of the Trade Act of 1974 as amended (19 U.S.C. 2462(a)(1), 2463(a)). (b) Country defined. For purposes of §§ 10.171 through 10.178, except as otherwise provided in § 10.176(a), the term “country” means any foreign country, any overseas dependent territory or possession of a foreign country, or the Trust Territory of the Pacific Islands. In the case of an association of countries which is a free trade area or customs union or which is contributing to comprehensive regional economic integration among its members through appropriate means, including but not limited to, the reduction of duties, the President may by Executive order provide that all members of such association other than members which are barred from designation under section 502(b) of the Trade Act of 1974 (19 U.S.C. 2462(b)) shall be treated as one country for purposes of §§ 10.171 through 10.178.

19 C.F.R. § 10.172 Claim for exemption from duty under the Generalized System of Preferences.

A claim for an exemption from duty on the ground that the Generalized System of Preferences applies shall be allowed by the Center director only if he is satisfied that the requirements set forth in this section and §§ 10.173 through 10.178 have been met. If duty-free treatment is claimed at the time of entry, a written claim shall be filed on the entry document by placing the symbol “A” as a prefix to the subheading of the Harmonized Tariff Schedule of the United States for each article for which such treatment is claimed.

19 C.F.R. § 10.173 Evidence of country of origin.

(a) Shipments covered by a formal entry—(1) Merchandise not wholly the growth, product, or manufacture of a beneficiary developing country—(i) Declaration. In a case involving merchandise covered by a formal entry which is not wholly the growth, product, or manufacture of a single beneficiary developing country, the exporter of the merchandise or other appropriate party having knowledge of the relevant facts shall be prepared to submit directly to the Center director, upon request, a declaration setting forth all pertinent detailed information concerning the production or manufacture of the merchandise. When requested by the Center director, the declaration shall be prepared in substantially the following form: (ii) Retention of records and submission of declaration. The information necessary for preparation of the declaration shall be retained in the files of the party responsible for its preparation and submission for a period of 5 years. In the event that the Center director requests submission of the declaration during the 5-year period, it shall be submitted by the appropriate party directly to the Center director within 60 days of the date of the request or such additional period as the Center director may allow for good cause shown. Failure to submit the declaration in a timely fashion will result in a denial of duty-free treatment. (2) Merchandise wholly the growth, product, or manufacture of a beneficiary developing country. In a case involving merchandise covered by a formal entry which is wholly the growth, product, or manufacture of a single beneficiary developing country, a statement to that effect shall be included on the commercial invoice provided to Customs. (b) Shipments covered by an informal entry. Although the filing of the declaration provided for in paragraph (a)(1)(i) of this section will not be required for a shipment covered by an informal entry, the Center director may require such other evidence of country of origin as deemed necessary. (c) Verification of documentation. Any evidence of country of origin submitted under this section shall be subject to such verification as the Center director deems necessary. In the event that the Center director is prevented from obtaining the necessary verification, the Center director may treat the entry as dutiable. GSP DECLARATION I, __________(name), hereby declare that the articles described below were produced or manufactured in ________________ (country) by means of processing operations performed in that country as set forth below and were also subjected to processing operations in the other country or countries which are members of the same association of countries as set forth below and incorporate materials produced in the country named above or in any other country or countries which are members of the same association of countries as set forth below: Date Address Signature Title

19 C.F.R. § 10.174 Evidence of direct shipment.

(a) Documents constituting evidence of direct shipment. The Center director may require that appropriate shipping papers, invoices, or other documents be submitted within 60 days of the date of entry as evidence that the articles were “imported directly”, as that term is defined in § 10.175. Any evidence of direct shipment required by the Center director shall be subject to such verification as he deems necessary. (b) Waiver of evidence of direct shipment. The Center director may waive the submission of evidence of direct shipment when he is otherwise satisfied, taking into consideration the kind and value of the merchandise, that the merchandise clearly qualifies for treatment under the Generalized System of Preferences.

19 C.F.R. § 10.175 Imported directly defined.

Eligible articles shall be imported directly from a beneficiary developing country to qualify for treatment under the Generalized System of Preferences. For purposes of §§ 10.171 through 10.178 the words “imported directly” mean: (a) Direct shipment from the beneficiary country to the United States without passing through the territory of any other country; or (b) If the shipment is from a beneficiary developing country to the U.S. through the territory of any other country, the merchandise in the shipment does not enter into the commerce of any other country while en route to the U.S., and the invoice, bills of lading, and other shipping documents show the U.S. as the final destination; or (c) If shipped from the beneficiary developing country to the United States through a free trade zone in a beneficiary developing country, the merchandise shall not enter into the commerce of the country maintaining the free trade zone, and (1) The eligible articles must not undergo any operation other than: (i) Sorting, grading, or testing, (ii) Packing, unpacking, changes of packing, decanting or repacking into other containers, (iii) Affixing marks, labels, or other like distinguishing signs on articles or their packing, if incidental to operations allowed under this section, or (iv) Operations necessary to ensure the preservation of merchandise in its condition as introduced into the free trade zone. (2) Merchandise may be purchased and resold, other than at retail, for export within the free trade zone. (3) For the purposes of this section, a free trade zone is a predetermined area or region declared and secured by or under governmental authority, where certain operations may be performed with respect to articles, without such articles having entered into the commerce of the country maintaining the free trade zone; or (d) If the shipment is from any beneficiary developing country to the U.S through the territory of any other country and the invoices and other documents do not show the U.S as the final destination, the articles in the shipment upon arrival in the U.S. are imported directly only if they: (1) Remained under the control of the customs authority of the intermediate country; (2) Did not enter into the commerce of the intermediate country except for the purpose of sale other than at retail, and the Center director is satisfied that the importation results from the original commercial transaction between the importer and the producer or the latter's sales agent; and (3) Were not subjected to operations other than loading and unloading, and other activities necessary to preserve the articles in good condition; or (e)(1) Shipment to the U.S. from a beneficiary developing country which is a member of an association of countries treated as one country under section 507(2), Trade Act of 1974, as amended (19 U.S.C. 2467(2)), through the territory of a former beneficiary developing country whose designation as a member of the same association for GSP purposes was terminated by the President pursuant to section 502(d), Trade Act of 1974, as amended (19 U.S.C. 2462(d)), provided the articles in the shipment did not enter into the commerce of the former beneficiary developing country except for purposes of performing one or more of the operations specified in paragraph (c)(1) of this section and except for purposes of purchase or resale, other than at retail, for export. (2) The designation of the following countries as members of an association of countries for GSP purposes has been terminated by the President pursuant to section 502(d) of the Trade Act of 1974 (19 U.S.C. 2462(d)): The Bahamas Brunei Darussalam Malaysia Singapore

19 C.F.R. § 10.176 Country of origin criteria.

(a) Merchandise produced in a beneficiary developing country or any two or more countries which are members of the same association of countries—(1) General. Except as otherwise provided in this section, any article which either is wholly the growth, product, or manufacture of, or is a new or different article of commerce that has been grown, produced, or manufactured in, a beneficiary developing country may qualify for duty-free entry under the Generalized System of Preferences (GSP). No article will be considered to have been grown, produced, or manufactured in a beneficiary developing country by virtue of having merely undergone simple (as opposed to complex or meaningful) combining or packaging operations or mere dilution with water or mere dilution with another substance that does not materially alter the characteristics of the article. Duty-free entry under the GSP may be accorded to an article only if the sum of the cost or value of the materials produced in the beneficiary developing country or any two or more countries that are members of the same association of countries and are treated as one country under section 507(2) of the Trade Act of 1974, as amended (19 U.S.C. 2467(2)), plus the direct costs of processing operations performed in the beneficiary developing country or member countries, is not less than 35 percent of the appraised value of the article at the time it is entered. (2) Combining, packaging, and diluting operations. No article which has undergone only a simple combining or packaging operation or a mere dilution in a beneficiary developing country within the meaning of paragraph (a)(1) of this section will be entitled to duty-free treatment even though the processing operation causes the article to meet the value requirement set forth in that paragraph. For purposes of this section: (i) Simple combining or packaging operations and mere dilution include, but are not limited to, the following: (A) The addition of batteries to devices; (B) Fitting together a small number of components by bolting, glueing, soldering, etc.; (C) Blending foreign and beneficiary developing country tobacco; (D) The addition of substances such as anticaking agents, preservatives, wetting agents, etc.; (E) Repacking or packaging components together; (F) Reconstituting orange juice by adding water to orange juice concentrate; and (G) Diluting chemicals with inert ingredients to bring them to standard degrees of strength; (ii) Simple combining or packaging operations and mere dilution will not be taken to include processes such as the following: (A) The assembly of a large number of discrete components onto a printed circuit board; (B) The mixing together of two bulk medicinal substances followed by the packaging of the mixed product into individual doses for retail sale; (C) The addition of water or another substance to a chemical compound under pressure which results in a reaction creating a new chemical compound; and (D) A simple combining or packaging operation or mere dilution coupled with any other type of processing such as testing or fabrication (for example, a simple assembly of a small number of components, one of which was fabricated in the beneficiary developing country where the assembly took place); and (iii) The fact that an article has undergone more than a simple combining or packaging operation or mere dilution is not necessarily dispositive of the question of whether that processing constitutes a substantial transformation for purposes of determining the country of origin of the article. (b) [Reserved] (c) Merchandise grown, produced, or manufactured in a beneficiary developing country. Merchandise which is wholly the growth, product, or manufacture of a beneficiary developing country, or an association of countries treated as one country under section 507(2) of the Trade Act of 1974 (19 U.S.C. 2467(2)) and § 10.171(b), and manufactured products consisting of materials produced only in such country or countries, shall normally be presumed to meet the requirements set forth in this section.

19 C.F.R. § 10.177 Cost or value of materials produced in the beneficiary developing country.

(a) “Produced in the beneficiary developing country” defined. For purposes of §§ 10.171 through 10.178, the words “produced in the beneficiary developing country” refer to the constituent materials of which the eligible article is composed which are either: (1) Wholly the growth, product, or manufacture of the beneficiary developing country; or (2) Substantially transformed in the beneficiary developing country into a new and different article of commerce. (b) Questionable origin. When the origin of an article either is not ascertainable or not satisfactorily demonstrated to the Center director, the article shall not be considered to have been produced in the beneficiary developing country. (c) Determination of cost or value of materials produced in the beneficiary developing country. (1) The cost or value of materials produced in the beneficiary developing country includes: (i) The manufacturer's actual cost for the materials; (ii) When not included in the manufacturer's actual cost for the materials, the freight, insurance, packing, and all other costs incurred in transporting the materials to the manufacturer's plant; (iii) The actual cost of waste or spoilage (material list), less the value of recoverable scrap; and (iv) Taxes and/or duties imposed on the materials by the beneficiary developing country, or an association of countries treated as one country, provided they are not remitted upon exportation. (2) Where the material is provided to the manufacturer without charge, or at less than fair market value, its cost or value shall be determined by computing the sum of: (i) All expenses incurred in the growth, production, manufacture or assembly of the material, including general expenses; (ii) An amount for profit; and (iii) Freight, insurance, packing, and all other costs incurred in transporting the materials to the manufacturer's plant.

19 C.F.R. § 10.178 Direct costs of processing operations performed in the beneficiary developing country.

(a) Items included in the direct costs of processing operations. As used in § 10.176, the words “direct costs of processing operations” means those costs either directly incurred in, or which can be reasonably allocated to, the growth, production, manufacture, or assembly of the specific merchandise under consideration. Such costs include, but are not limited to: (1) All actual labor costs involved in the growth, production, manufacture, or assembly of the specific merchandise, including fringe benefits, on-the-job training, and the cost of engineering, supervisory, quality control, and similar personnel; (2) Dies, molds, tooling, and depreciation on machinery and equipment which are allocable to the specific merchandise; (3) Research, development, design, engineering, and blueprint costs insofar as they are allocable to the specific merchandise; and (4) Costs of inspecting and testing the specific merchandise. (b) Items not included in the direct costs of processing operations. Those items which are not included within the meaning of the words “direct costs of processing operations” are those which are not directly attributable to the merchandise under consideration or are not “costs” of manufacturing the product. These include, but are not limited to: (1) Profit; and (2) General expenses of doing business which are either not allocable to the specific merchandise or are not related to the growth, production, manufacture, or assembly of the merchandise, such as administrative salaries, casualty and liability insurance, advertising, and salesmen's salaries, commissions, or expenses.

19 C.F.R. § 10.178a a Special duty-free treatment for sub-Saharan African countries.

(a) General. Section 506A of the Trade Act of 1974 (19 U.S.C. 2466a) authorizes the President to provide duty-free treatment for certain articles otherwise excluded from duty-free treatment under the Generalized System of Preferences (GSP) pursuant to section 503(b)(1)(B) through (G) of the Trade Act of 1974 (19 U.S.C. 2463(b)(1)(B) through (G)) and authorizes the President to designate a country listed in section 107 of the African Growth and Opportunity Act (19 U.S.C. 3706) as an eligible beneficiary sub-Saharan African country for purposes of that duty-free treatment. (b) Eligible articles. The duty-free treatment referred to in paragraph (a) of this section will apply to any article within any of the following classes of articles, provided that the article in question has been designated by the President for that purpose and is the growth, product, or manufacture of an eligible beneficiary sub-Saharan African country and meets the requirements specified or referred to in paragraph (d) of this section: (1) Watches, except those watches entered after June 30, 1989, that the President specifically determines, after public notice and comment, will not cause material injury to watch or watch band, strap, or bracelet manufacturing and assembly operations in the United States or the United States insular possessions; (2) Certain electronic articles; (3) Certain steel articles; (4) Footwear, handbags, luggage, flat goods, work gloves, and leather wearing apparel which were not eligible articles for purposes of the GSP on January 1, 1995, as the GSP was in effect on that date; (5) Certain semimanufactured and manufactured glass products; and (6) Any other articles which the President determines to be import-sensitive in the context of the GSP. (c) Claim for duty-free treatment. A claim for the duty-free treatment referred to in paragraph (a) of this section must be made by placing on the entry document the symbol “D” as a prefix to the subheading of the Harmonized Tariff Schedule of the United States for each article for which duty-free treatment is claimed; (d) Origin and related rules. The provisions of §§ 10.171, 10.173, and 10.175 through 10.178 will apply for purposes of duty-free treatment under this section. However, application of those provisions in the context of this section will be subject to the following rules: (1) The term “beneficiary developing country,” wherever it appears, means “beneficiary sub-Saharan African country;' (2) In the GSP declaration set forth in § 10.173(a)(1)(i), the column heading “Materials produced in a beneficiary developing country or members of the same association” should read “Material produced in a beneficiary sub-Saharan African country, a former beneficiary sub-Saharan African country, or the U.S.;” (3) The provisions of § 10.175(c) will not apply; and (4) For purposes of determining compliance with the 35 percent value content requirement set forth in § 10.176(a): (i) An amount not to exceed 15 percent of the appraised value of the article at the time it is entered may be attributed to the cost or value of materials produced in the customs territory of the United States, and the provisions of § 10.177 will apply for purposes of identifying materials produced in the customs territory of the United States and the cost or value of those materials; and (ii) The cost or value of materials included in the article that are produced in more than one beneficiary sub-Saharan African country or former beneficiary sub-Saharan African country may be applied without regard to whether those countries are members of the same association of countries. (5) As used in this paragraph, the term “former beneficiary sub-Saharan African country” means a country that, after being designated by the President as a beneficiary sub-Saharan African country under section 506A of the Trade Act of 1974 (19 U.S.C. 2466a), ceased to be designated as such a beneficiary sub-Saharan African country by reason of its entering into a free trade agreement with the United States. (e) Importer requirements. In order to make a claim for duty-free treatment under this section, the importer: (1) Must have records that explain how the importer came to the conclusion that the article qualifies for duty-free treatment; (2) Must have records that demonstrate that the importer is claiming that the article qualifies for duty-free treatment because it is the growth of a beneficiary sub-Saharan African country or because it is the product of a beneficiary sub-Saharan African country or because it is the manufacture of a beneficiary sub-Saharan African country. If the importer is claiming that the article is the growth of a beneficiary sub-Saharan African country, the importer must have records that indicate that the product was grown in that country, such as a record of receipt from a farmer whose crops are grown in that country. If the importer is claiming that the article is the product of, or the manufacture of, a beneficiary sub-Saharan African country, the importer must have records that indicate that the manufacturing or processing operations reflected in or applied to the article meet the country of origin rules set forth in § 10.176(a) and paragraph (d) of this section. A properly completed GSP declaration in the form set forth in § 10.173(a)(1) is one example of a record that would serve this purpose; (3) Must establish and implement internal controls which provide for the periodic review of the accuracy of the declarations or other records referred to in paragraph (e)(2) of this section; (4) Must have shipping papers that show how the article moved from the beneficiary sub-Saharan African country to the United States. If the imported article was shipped through a country other than a beneficiary sub-Saharan African country and the invoices and other documents from the beneficiary sub-Saharan African country do not show the United States as the final destination, the importer also must have documentation that demonstrates that the conditions set forth in § 10.175(d)(1) through (3) were met; (5) Must have records that demonstrate the cost or value of the materials produced in the United States and the cost or value of the materials produced in a beneficiary sub-Saharan African country or countries and the direct costs of processing operations incurred in the beneficiary sub-Saharan African country that were relied upon by the importer to determine that the article met the 35 percent value content requirement set forth in § 10.176(a) and paragraph (c) of this section. A properly completed GSP declaration in the form set forth in § 10.173(a)(1) is one example of a record that would serve this purpose; and (6) Must be prepared to produce the records referred to in paragraphs (e)(1), (e)(2), (e)(4), and (e)(5) of this section within 30 days of a request from Customs and must be prepared to explain how those records and the internal controls referred to in paragraph (e)(3) of this section justify the importer's claim for duty-free treatment.

19 C.F.R. § 10.66 Articles exported for temporary exhibition and returned; horses exported for horse racing and returned; procedure on entry.

(a) In connection with the entry of articles, including livestock or other animals, exported for temporary exhibition and returned and claimed to be exempt from duty under subheading 9801.00.50 or 9801.00.60, Harmonized Tariff Schedule of the United States (HTSUS), there shall be filed: (1) A certificate of exportation on Customs Form 3311, or its electronic equivalent; (2) A declaration of the importer on Customs Form 4455, or its electronic equivalent, for articles of either domestic or foreign origin; and (3) In the case of animals of foreign origin taken abroad for exhibition in connection with a circus or menagerie, a copy of an inventory of these animals filed prior to their leaving the country with the director of the port of their departure. (b) If it is shown to be impracticable to produce the certificate of exportation required under paragraph (a)(1) of this section, the port director may accept other satisfactory evidence of exportation, or may take a bond on Customs Form 301, containing the bond conditions set forth in § 113.62 of this chapter to secure the production of such certificate or other evidence. (c) Articles claimed to be exempt from duty under subheading 9801.00.50 or 9801.00.60, Harmonized Tariff Schedule of the United States (HTSUS) (19 U.S.C. 1202), may be returned free of duty without formal entry and without regard to the requirements of paragraph (a) or (b) of this section if: (1) Prior to the exportation of such articles, an application on Customs Form 4455, or its electronic equivalent, (accompanied by an appropriate inventory, when required by law or by the port director) is filed with a declaration thereon that: (i) Any right to drawback of Customs duties with respect to that shipment was waived; (ii) Any internal revenue tax due has been paid and no refund thereof will be sought; and (iii) The merchandise was identified, registered, and exported in accordance with the regulations set forth in §§ 10.8(e), (g), (h), and (i), governing the exportation of articles sent abroad for repairs, and (2) Upon return, a duplicate Customs Form 4455, or its electronic equivalent, (with accompanying inventory where one was required) is filed.

19 C.F.R. § 10.67 Articles exported for scientific or educational purposes and returned; procedure on entry.

(a) In connection with each entry of articles exported for scientific or educational purposes and returned under subheading 9801.00.40, Harmonized Tariff Schedule of the United States (HTSUS), the following shall be required, irrespective of the value of the shipment: (1) A certificate of exportation on Customs Form 3311, or its electronic equivalent; (2) A declaration, or its electronic equivalent, by the foreign shipper in the same form as that prescribed in § 10.66(a)(2) but stating that such articles were sent from the United States solely for temporary scientific or educational use and describing the specific use to which they were put while abroad. (3) A declaration of the ultimate consignee, or its electronic equivalent, in substantially the following form: (b) If it is shown to be impracticable to produce the certificate of exportation required by paragraph (a)(1) of this section, the port director may accept other satisfactory evidence of exportation. The port director may take a bond on Customs Form 301, containing the bond conditions set forth in § 113.62 of this chapter to secure the subsequent production of any of the evidence or documents required by paragraph (a) of this section which are not available at the time of entry. (c) If, prior to the exportation of articles claimed to be exempt from duty under subheading 9801.00.40, Harmonized Tariff Schedule of the United States (HTSUS), an application on Customs Form 4455, or its electronic equivalent, (accompanied by an appropriate inventory when, in the discretion of the port director, such inventory is deemed necessary) was filed, such articles may be returned for the account of the exporter free of duty without formal entry, without regard to the requirements of paragraphs (a) and (b) of this section, upon the filing of the duplicate Customs Form 4455, or its electronic equivalent, (with accompanying inventory, if one was required), and a declaration of the ultimate consignee in substantially the form set forth in paragraph (a)(3) of this section. Port of ________________, Port Director's Office, __________________, 19____. I, ____________________, declare that the several articles described in the annexed entry are, to the best of my knowledge and belief, the identical articles exported from the United States on the ____________ day of ____________, 19____, by __________________ (Actual shipper) address ________________, for the account of ________________, address ________________that they are returned to ________________, address ________________, for the account of ________________, address ______________ that the said articles were exported solely for temporary scientific or educational purposes and for no other use abroad than for exhibition, examination, or experimentation; that they are being returned without having been changed in condition in any manner, except by reason of their bona fide use as follows: (Describe change in condition) (Ultimate consignee)

19 C.F.R. § 10.48 Engravings, sculptures, etc.

(a) Invoices covering works of art claimed to be free of duty under subheadings 9702.00.00 and 9703.00.00, HTSUS, shall show whether they are originals, replicas, reproductions, or copies, and also the name of the artist who produced them, unless upon examination the Customs officer is satisfied that such statement is not necessary to a proper determination of the facts. (b) The following evidence shall be filed in connection with the entry: A declaration, or its electronic equivalent, in the following form by the artist who produced the article, or by the seller, shipper or importer, showing whether it is original, or in the case of sculpture, the original work or model, or one of the first twelve castings, replicas, or reproductions made from the original work or model; and in the case of etchings, engravings, woodcuts, lithographs, or prints made by other hand-transfer processes, that they were printed by hand from hand-etched, hand-drawn, or hand-engraved plates, stones, or blocks: (c) The Center director may waive the declaration requirement set forth in paragraph (b) of this section. (d) Artists' proof etchings, engravings, woodcuts, lithographs, or prints made by other hand-transfer processes should bear the genuine signature or mark of the artist as evidence of their authenticity. In the absence of such a signature or mark, other evidence shall be required which will establish the authenticity of the work to the satisfaction of the Center director. I, ________, do hereby declare that I am the producer, seller, shipper or importer of certain works of art, namely ________ covered by the annexed invoice dated ________; that any sculptures or statuary included in that invoice are the original works or models or one of the first twelve castings, replicas, or reproductions made from the sculptor's original work or model; and that any etchings, engravings, woodcuts, lithographs, or prints made by other hand-transfer processes included in that invoice were printed by hand from hand-etched, hand-drawn, or hand-engraved plates, stones, or blocks.

19 C.F.R. § 10.49 Articles for exhibition; requirements on entry.

(a) There shall be filed in connection with the entry of works of art and other articles claimed to be free of duty under Chapter 98, Subchapter XII, Harmonized Tariff Schedule of the United States (HTSUS), a declaration, or its electronic equivalent, by a qualified officer of the institution in sufficient detail to demonstrate entitlement to entry as claimed, and a bond on Customs Form 301, containing the bond conditions set forth in § 113.62 of this chapter. Claim for free entry under Chapter 98, Subchapter XII may be made for articles of the character described therein which have been previously entered under any other provision of law and the entry amended accordingly upon compliance with the requirements of this section, provided the articles have not been released from Customs custody. (b) The Center director may require a copy of the charter or other evidence of the character of the institution for which the articles are imported, and may also require the production of the original of any order given by such society or institution to any importing agent or dealer for such articles. The society or institution shall file, within 6 months after the date of filing the entry, any document or proof demanded by the Center director in connection with the entry. (c) Articles entered under subheading 9812.00.20, HTSUS, may be transferred from one institution to another upon an application in writing in the case of each transfer describing the articles and stating the name of the institution to which transfer is to be made, provided the sureties to the bond assent in writing under seal or a new bond is filed. No entry or withdrawal shall be required for such a transfer. (d) If any of the articles accorded free entry under Chapter 98, Subchapter XII shall be sold, offered or exposed for sale, transferred, or used in any manner contrary to the provisions of the regulations in this part, within 5 years after the date of entry under such part, the amount of the duties shall be collected immediately by the CBP, either at the port of entry or electronically and deposited as duties. If the articles are exported or destroyed under Customs supervision within such 5-year period, the liability under the bond shall be treated as terminated.

19 C.F.R. § 10.52 Painted, colored or stained glass windows for religious institutions.

When painted, colored, or stained glass windows or parts thereof, are claimed free of duty under subheading 9810.00.10, Harmonized Tariff Schedule of the United States (19 U.S.C. 1202), the Center director may, at his discretion, require appropriate proof that the importation was designed by, and produced by or under the direction of, a professional artist, and that it is for the use of an institution established solely for religious purposes.

19 C.F.R. § 10.53 Antiques.

(a) Articles accompanying a passenger and entitled to entry under the passenger's declaration and entry, or articles entered under an informal entry which are claimed to be free of duty under subheading 9706.00.00, Harmonized Tariff Schedule of the United States (HTSUS), may be admitted free of duty upon the execution of a declaration on the face of the entry, or its electronic equivalent, provided that the passenger or person filing the informal entry is the owner of the articles and that they are for his personal use and not for sale or other commercial use and provided the Customs officer concerned is satisfied that the articles are of the requisite age. (b) Antiques of the age prescribed by subheading 9706.00.00, HTSUS, or admitted under the provisions of paragraph (e) of this section, shall be admitted free of duty though repaired or renovated. If, however, an antique has been repaired with a substantial amount of additional material, without changing the original form or shape, the original and added portions shall be appraised and reported as separate entities and the basis for such report shall be plainly indicated on the invoice by the appraiser. In such cases duty shall be assessed on the portion added. If the repairs consist of an addition to an article of a feature which changes it substantially from the article originally produced, or if the antique portion has otherwise been so changed as to lose its identity as the article which was in existence prior to the time prescribed in subheading 9706.00.00, HTSUS, the entire article shall be excluded from free entry under subheading 9706.00.00, HTSUS. (c) Except for furniture admitted under the provisions of paragraph (e) of this section, furniture claimed to be free of duty under subheading 9706.00.00, Harmonized Tariff Schedule of the United States (HTSUS) may be entered for consumption at any port of entry within the customs territory of the United States. Furniture as used in this section of the regulations is defined as ‘movable articles of convenience or decoration for use in furnishing a house, apartment, place of business or accommodation’. This definition embraces most articles claimed to be free of duty as antiques. (d) A claim for the free entry of an article under subheading 9706.00.00, HTSUS on the basis of antiquity may be made on the entry, or filed after entry at any time prior to liquidation of the entry, provided the article has not been released from Customs custody or it has been found upon examination before such release to be described in subheading 9706.00.00, HTSUS. (e) Antique articles otherwise prohibited entry by the Endangered Species Act of 1973 (16 U.S.C. 1521, et seq.) may be entered if: (1) The article is composed in whole or in part of any endangered or threatened species listed in 50 CFR 17.11 or 17.12, (2) The article is not less than 100 years of age, (3) The article has not been repaired or modified with any part of any such endangered or threatened species, on or after December 28, 1973, (4) The article is entered at a port designated in § 12.26 of this chapter, (5) A Declaration for Importation or Exportation of Fish or Wildlife (USFWS Form 3-177, or its electronic equivalent) is filed at the time of entry with the port director who will forward the form to the U.S. Fish and Wildlife Service, and (6) The importer meets the requirements of paragraph (a) of this section. (f) The additional duty imposed by additional U.S. Note 2, Chapter 97, HTSUS, shall apply to any article which is imported for sale and claimed, either at the time of entry or at a later date, to be free of duty under subheading 9706.00.00, HTSUS, if such article is later found to be unauthentic in respect of the antiquity claimed as a basis for such free entry, unless the claim under subheading 9706.00.00, HTSUS, is withdrawn in writing before the examination of the article for the purpose of appraisement or classification has begun. (g) The additional duty provided for in additional U.S. Note 2, Chapter 97, HTSUS shall not be assessed if the importer established by evidence satisfactory to the Center director that the article was not imported for sale. In the case of any article imported in a passenger's baggage or entered under an informal entry, the Customs officer concerned may accept the statement of the owner that the article was not imported for sale if he is satisfied of the truth of such statement.

19 C.F.R. § 10.54 Gobelin and other hand-woven tapestries.

Pursuant to subheading 5805.00.10, Harmonized Tariff Schedule of the United States, Gobelin tapestries produced in the Manufacture Nationale des Gobelins factories at Paris and Beauvais under the direction and control of the French Government, and other hand-woven tapestries, shall be accorded free entry if of a kind fit only for use as wall hangings, and valued over $215 per square meter.

19 C.F.R. § 10.68 Procedure.

(a) Theatrical scenery, properties, and effects, motion-picture films (including motion-picture films taken aboard a vessel for exhibition only during an outward voyage and returned for the same purpose during an inward voyage on the same or another vessel), commercial travelers' samples, and professional books, implements, instruments, and tools of trade, occupation, or employment (see § 148.53 of this chapter), of domestic or foreign origin, taken abroad may be returned without formal entry and without payment of duty if an exportation voucher from a carnet, when applicable, or an application on Customs Form 4455, or its electronic equivalent, was filed, and the merchandise was identified as set forth in § 10.8, before exportation of the articles. Articles exported under cover of an A.T.A. carnet (where the carnet serves as the control document) may, in accordance with this paragraph, be returned without entry or the payment of duty. If Customs Form 4455, or its electronic equivalent, is utilized, commercial travelers' samples, professional books, implements, instruments, and tools of trade, occupation, or employment may be returned with either an informal entry or a declaration on Customs Form 3299, or its electronic equivalent; theatrical scenery, properties, and effects and motion-picture films may be returned only with an informal entry. When articles other than those exported by mail or parcel post are examined and registered at one port and exported through another port, the port director may require proof of exportation in those cases where the carnet or Customs Form 4455, or its electronic equivalent, does not reflect that these articles were exported under Customs supervision. In the case of commercial travelers' samples taken abroad for temporary use, except where exportation involves certification of a carnet, port directors may waive examination of the samples at the time of exportation. When motion-picture films are to be taken aboard a vessel for exhibition only during an outward voyage and are to be returned for the same purpose during an inward voyage on the same or another vessel, port directors may waive examination and supervision at the time of exportation. When theatrical scenery, properties, and effects are taken abroad in sealed carload lots by rail for temporary use, the cars must be sealed by U.S. Customs officers for entry at any Canadian or Mexican port where U.S. Customs officers are stationed. Application and examination before the time of exportation is waived if a Customs Form 4455, or its electronic equivalent, is filed with the U.S. Customs officer in the appropriate Canadian or Mexican port, and that officer examines the articles before they are released from foreign customs custody by the foreign customs officer. (b) When any such articles are to be returned to the United States from a contiguous foreign country in which a United States Customs officer is stationed, the articles may be presented to such officer with the duplicate copy of the application for examination and comparison with the descriptive list. Upon completion of such examination, the packages containing the articles shall be corded and sealed or forwarded in cars sealed by Customs officers and shall be manifested in the same manner as personal baggage. Articles so treated shall be released upon arrival in the United States and removal of the seals by Customs officers. (c) When commercial travelers' samples consisting of raw cotton are taken to and returned from Canada, the application on Customs Form 4455, or its electronic equivalent, shall be executed in triplicate, two copies thereof to be returned to the traveler for surrender to the Customs officer on the return of the samples from Canada.

19 C.F.R. § 10.69 Samples to Great Britain and Ireland under reciprocal agreement.

Descriptive lists, or their electronic equivalents, of samples taken to Great Britain and Ireland by commercial travelers of the United States under the joint declarations of December 3 and 8, 1910 (State Department treaty series 552), shall be required in triplicate, verified by the affidavit of the commercial traveler before a Customs officer, and shall show that the samples are for use as models or patterns for the purpose of obtaining orders and not for sale and that the lists contain a full description of the articles. One copy shall be retained and the others shall be delivered to the commercial traveler—one for the identification of the samples on their return to the United States and one for the use of the foreign customs authorities. The latter copy must have been attested by a consular officer of the country concerned in the United States.

19 C.F.R. § 10.112 Filing free entry documents or reduced duty documents after entry.

Whenever a free entry or a reduced duty document, form, or statement required to be filed in connection with the entry is not filed at the time of the entry or within the period for which a bond was filed for its production, but failure to file it was not due to willful negligence or fraudulent intent, such document, form, or statement may be filed at any time prior to liquidation of the entry or, if the entry was liquidated, before the liquidation becomes final. See § 113.43(c) of this chapter for satisfaction of the bond and cancellation of the bond charge.

19 C.F.R. § 10.107 Equipment and supplies; admission.

(a) There shall be admitted without entry and without the payment of duty or any tax imposed upon or by reason of importation of any article described in section 322(b), Tariff Act of 1930, as amended, subject to compliance with the following conditions: (1) Before importation or as soon thereafter as possible, and in every case before the expiration of 10 days after importation, a report, or its electronic equivalent, shall be made to the nearest Customs officer by the person in charge of sending the article from the foreign country, or by the person for whose account it was brought into the United States, stating the character, quantity, destination, and use to be made of the article. (2) If practicable, the article shall be exported under Customs supervision. In any other case a report shall be made by the person in charge of the exportation as soon as possible after exportation to the Customs officer to whom the arrival was reported, stating the character, quantity, and circumstances of the exportation. (b) In the case of each article admitted under paragraph (a) of this section, the port director shall satisfy himself as to whether the article was exported within a reasonable time, or that it has been properly expended or destroyed. If an article is so far destroyed, in connection with a use contemplated for it by section 322 (b) that it has only a salvage value, it shall not be required to be exported. (c) Any article admitted under paragraph (a) of this section which is used in the United States otherwise than for a purpose contemplated for it by section 322(b), or which is not exported within 90 days after its arrival in the United States, or within such longer time as may be specially authorized by the port director or Headquarters, U.S. Customs Service, shall be seized and forfeited to the United States.

19 C.F.R. § 10.114 General provisions.

The consolidated regulations of the Commerce and Treasury Departments relating to the entry of instruments and apparatus for educational and scientific institutions are contained in 15 CFR part 301.

19 C.F.R. § 10.70 Purebred animals for breeding purposes; certificate.

(a) In connection with the entry of purebred animals for breeding purposes under subheading 0101.11.00, Harmonized Tariff Schedule of the United States (HTSUS), no claim for free entry shall be allowed in liquidation of the entry until the Center director has received from the Department of Agriculture a certificate, or its electronic equivalent, that the animal is purebred of a recognized breed and duly registered in a book of record recognized by the Secretary of Agriculture for that breed. Importers are required by regulation of the Department of Agriculture to make application for a certificate of pure breeding to the U.S. Department of Agriculture, Animal and Plant Health Inspection Service, Veterinary Services, on ANH Form 17-338 before the animal will be examined as required by 9 CFR 151.7. Application for the certificate must be executed by the owner agent, or importer and filed at a port of entry designated in the regulations of the Department of Agriculture for the importation of animals (9 CFR 92.3). However, applications for certificates for dogs (other than dogs for handling livestock regulated under 9 CFR 92.18) and cats may be filed either at a designated port of entry or at any other port where Customs entry is made. The regulations of the Department of Agriculture prescribing the requirements for the issuance of certificates of pure breeding provide that all animals imported under such regulations must be accompanied to the port at which examination is to be made by certificates of pedigree and transfer of ownership, or their electronic equivalents, in order that identification may be accomplished, and that, if such animals are moved from such port prior to the presentation of such certificates and transfers, or their electronic equivalents, such action shall constitute a waiver of any further claim to certification under such regulations. (b) In the cases of cats and dogs arriving at Canadian border ports, Customs officers and employees are hereby authorized and directed to make the examination required by such regulations of the Department of Agriculture. Customs officers and employees are also authorized and directed to make such examinations at the ports of New York and Boston, provided the dog or cat is brought into the United States by a passenger. At all airports, Customs officers shall make the examination of dogs and cats, whether or not accompanied by the owners, if there is no inspector of the Department of Agriculture stationed there or on duty at the time of arrival.

19 C.F.R. § 10.71 Purebred animals; bond for production of evidence; deposit of estimated duties; stipulation.

(a) The animal may be released from Customs custody upon the furnishing by the importer of a bond on Customs Form 301, containing the bond conditions set forth in § 113.62 of this chapter for the production within 6 months of (1) a certificate of pure breeding, or its electronic equivalent, issued by the Department of Agriculture, and (2) the declaration required by § 10.70(a) submitted in letter form if such declaration was not filed at the time of entry. The release of the animal from customs custody requires the presentation of the pedigree certificate and evidence of transfer of ownership in accordance with the regulations of the Department of Agriculture mentioned in § 10.70(b). (b) Charges against the bond shall be canceled only upon the production of the required evidence or on payment of duties. (c) In cases where the pedigree certificate and evidence of transfer of ownership have been presented in accordance with the regulations of the Department of Agriculture, the importer, if he so elects, may, in lieu of giving a bond, deposit estimated duties and file a stipulation with CBP, either at the port of entry or electronically within 10 days after the date of entry to produce the declaration and certificate of pure breeding within 6 months from the date of entry, whereupon the liquidation of the entry shall be suspended. (See § 113.42 of this chapter.) (d) If the pedigree certificate and evidence of transfer of ownership were not presented in accordance with such regulations of the Department of Agriculture, a deposit of estimated duties, in addition to the regular entry bond, shall be required. (e) When a passenger arriving in the United States with one or more dogs or cats and with the required certificates of pedigree and transfers of ownership in his possession furnishes a properly executed declaration as required by § 10.70(a) along with an application to the Department of Agriculture on ANH Form 17-338 for a certificate of pure breeding, the entry of the animal(s) as duty-free under subheading 0106.00.50, Harmonized Tariff Schedule of the United States (HTSUS), may be made on the passenger's baggage declaration if the value of the animals does not exceed $500. In such case the entry shall be supported by a bond on Customs Form 301, containing the bond conditions set forth in § 113.62 of this chapter for the production within 6 months of a certificate of pure breeding. The bond shall be without surety or cash deposit unless the port director on the basis of information before him finds that a bond with surety or a cash deposit is necessary to protect the revenue.

19 C.F.R. § 10.74 Animals straying across boundary for pasturage; offspring.

When domestic animals for which free entry is to be claimed under subheading 9801.00.90, Harmonized Tariff Schedule of the United States, have strayed across the boundary line, they may be returned, together with their offspring, without entry if brought back within 30 days; otherwise entry shall be required. The owner of any such animal shall report its return to the nearest Customs office and hold it for such inspection and treatment as may be deemed necessary by a representative of the Animal and Plant Health Inspection Service of the Department of Agriculture. Any such arrival found not to have been so reported or held shall be subject to seizure and forfeiture pursuant to 18 U.S.C. 545.

19 C.F.R. § 10.75 Wild animals and birds; zoological collections.

When wild animals or birds are claimed to be free of duty under subheading 9810.00.70, Harmonized Tariff Schedule of the United States (HTSUS), (19 U.S.C. 1202), the port director may, at his discretion, require appropriate proof that the animals or birds were specially imported pursuant to negotiations conducted prior to importation for the delivery of animals or birds of a named species meeting agreed specifications of reasonable particularity and that they are intended at the time of importation for public exhibition in a collection maintained for scientific or educational purposes and not for sale or for use in connection with any enterprise conducted for profit. The fact that an animal or bird may have been sent on approval shall not preclude free entry under subheading 9810.00.70, HTSUS, when it is actually accepted as a part of the zoological collection and so exhibited.

19 C.F.R. § 10.76 Game animals and birds.

(a) The following classes of live game animals and birds may be admitted free of duty for stocking purposes under the provisions of subheading 9817.00.70 without reference to the United States Customs Service, if the requirements of the Fish and Wildlife Service, Department of the Interior, have been complied with. (b) Application for the free entry of other live animals or birds under subheading 9817.00.70, Harmonized Tariff Schedule of the United States shall be referred to the United States Customs Service for consideration. Animals imported for fur-farming purposes shall not be admitted free of duty under that paragraph. (c) [Reserved] (d) Game animals and birds killed in foreign countries by residents of the United States, if not imported for sale or other commercial purposes, may be admitted free of duty without entry, if the person has no merchandise requiring a written declaration upon the filing of a declaration on U.S. Fish and Wildlife Service Form 3-177, Declaration for Importation or Exportation of Fish or Wildlife. No bond or cash deposit to insure the destruction or exportation of the plumage of such birds shall be required. animals 1. Cervidae, commonly known as deer and elk. 2. Leporidae, commonly known as rabbits. 3. Sciuridae, commonly known as squirrels. birds 1. Anatidae, commonly known as ducks and geese. 2. Gallinae, commonly known as turkeys, grouse, pheasants, partridges, and quail. 3. Otididae, commonly known as bustards. 4. Tinamidae, commonly known as tinamous.

Starting a business? Corpus forms LLCs in all 50 states and DC.